• The Korean Journal of Malacology
• /
• v.32 no.1
• /
• pp.31-36
• /
• 2016

In the present study, we observed a unique association of the flat oyster, Ostrea denselamellosa obtained from a muddy substrate at Haechang Bay, the south coast of Korea in the spring of 2013. Fossilized or semi-fossilized veneriid clam shells, possibly Ruditapes philippinarum, were found adhering to the umbonal area of the flat oyster valves. This unique association of the flat oyster shells with the fossilized clam shells suggested that the flat oyster larvae utilized the clam shells as substrate during settlement. Since availability of clam shells in the muddy subtidal environment is limited, this unique substrata for the flat oyster larvae may limit recruitment of the flat oysters in the bay.

• The Korean Journal of Malacology
• /
• v.15 no.2
• /
• pp.105-113
• /
• 1999

This study was measured environmental factors of flat oyster habitats and biomass of flat oyster to improve the productivity of flat oyster. Water temperature and salinity of the flat oyster habitat ranged from 5.5 to 27.4$^{\circ}C$ and from 31.2 to 33.4 , respectively. Average concentrations of DO, COD, DIN and PO$\_$4/$\^$3/ -P were 7.11 mg/l, 4.55 $\mu\textrm{g}$-at./l and 0.36 $\mu\textrm{g}$-at./l respectively. Surface sediments at the sampling area were composed of coarse sand, sandy silt and silty sand. Average level of IL, COD and AVS in the surface sediments were 2.6%, 13.70 mg/g dry and 0.33 mg/g dry respectively. In each sampling station, total standing crops of phytoplankton showed peaks twice in February and August. Dominant species of phytoplankton occurred in Haechang Bay throughout the year were Skeletonema costatum, Paralia sulcata, Eucampia zodiacus, Chaetoceros curvicetus, C. affinis, C. debilis, C. decipiens, Asterionella glacialis, Pseudonitzschia longissima, Pseudonitzschia seriata, Ceratium furca and C. fusus. Ten species of the bivalves were collected at the flat oyster habitat. Most of bivalves were the eutrophic species Ostrea denselamellosa, Crassostrea gigas, Ruditapes philippinarum, Scaphraca subcrenata, Scapharca broughtonii, Atrina pectinata, Fulvia mutica, Mytilus edulis, Protothaca jedoensis and Megacardita ferruginosa. The mean density of them was 21 inds./㎡ (479.14 g/㎡), while that of the flat oyster was at 0.25 inds./㎡ (231.25 g/㎡).

• The Korean Journal of Malacology
• /
• v.15 no.2
• /
• pp.115-119
• /
• 1999

We investigated the processes of egg and larval developments for aquaculture technique development of seedling production fo the flat oyster, Ostrea denselamellosa. Teo flat oyster of larviparous type was different from the pacific oyser (ovivarous type) because their larvae (trochophore and prodissoconch larvae) in the gill released into the seawater. The process of egg development was observed by artificial fertilization at $25^{\circ}C$, using a dissecting method. The sizes of Unfertilized eggs ranged from 80 to 90 $\mu\textrm{m}$ and fertilized eggs with globule-shape was 90-100 $\mu\textrm{m}$. The Polar body appeared after fertilization and egg cleavage began within 1 hour, reaching the blastula stage after 10 hours. The trochophore in the gill appeared 2-3 days after fertilization and grew to the prodissoconch larvae (130 140 $\mu\textrm{m}$) having a complete shell after 1-2 days. The shell of prodissoconch larvae grew to 205 220 $\mu\textrm{m}$ after 10 hours, and then they became umbo stage larvae showing oval in shape. The velum of umbo stage larvae was degenerated about 17-20 days after fertilization and grew into a pediveliger with a developed foot, at this time, the shell length size was 320 360 $\mu\textrm{m}$.

• The Korean Journal of Malacology
• /
• v.28 no.1
• /
• pp.45-54
• /
• 2012

We investigated environmental characteristics of the tidal flat oyster aquafarms to clarifyeffects of the tidal flat environmental factors on growth and mortality of the tidal flat oyster Crassostrea gigas by the Net Bag Rack Culture System in two districts in Western Korea. In this study, we have carried out the basic environmental investigation on growth of the single tidal flat, water quality and sediments, etc. in Taean and Seosan districts, Choongcheongnam-do, where the single tidal flat oyster aquaculture have been performed by the net bag rack culture system. In June 2011 when the final survey carried out at the two districts in western Korea, the mortality in Seosan district was higher than that in Tae-an district. Judging from the results of growth and mortality of the single tidal flat oysters investigated at two sites of Jinsan-ri in Taean and Chang-ri in Seosan districts, two results of Taean district showed higher growth and lower mortality than those of Seosan district. It is assumed that the proper acceptable density possible for growth of the tidal flat seeds and the secure of economics, in case of plastic cultivate net with the size of $50{\times}80cm$, are about 200 individuals. In this study, It was clarified that selection of the suitable sites, the input into the net bag of high quality oyster seeds and selective dispersion in the optimal density of the single tidal flat oyster have an effect on growth and mortality of the tidal flat oyster.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.658-667
• /
• 1996

A computer vision system was developed to automatically detect and locate the oyster hinge line, one step in shucking an oyster. The computer vision system consisted of a personal computer, a color frame grabber, a color CCD video camera with a zoom lens, two video monitor, a specially designed fixture to hold the oyster, a lighting system to illuminate the oyster and the system software. The software consisted of a combination of commercially available programs and custom designed programs developed using the Microsoft CTM . Test results showed that the image resolution was the most important variable influencing hinge detection efficiency. Whether or not the trimmed -off-flat-white surface area was dry or wet, the oyster size relative to the image size selected , and the image processing methods used all influenced the hinge locating efficiency. The best computer software and hardware combination used successfully located 97% of the oyster hinge lines tested. This efficienc was achieve using camera field of view of 1.9 by 1.5cm , a 180 by 170 pixel image window, and a dry trimmed -off oyster hinge end surface.

• The Korean Journal of Malacology
• /
• v.27 no.4
• /
• pp.291-297
• /
• 2011

In an attempt to improve the substrate condition for Manila clam (Ruditapes philippinarum) culture, crushed oyster (Crassostrea gigas) shells were spread on the muddy tidal flat of Namseong-ri, Podu-myeon, Goheung-gun, Jeollannam-do in April 2008. To test the suitability of the crushed oyster shell added substrate, seed clams were transplanted from Taehwa river estuary in Ulsan city in June 2008. Over 23 months of sampling, the mean grain size and the sorting in the experimental site containing the crushed oyster shell were significantly higher than the control site. The ignition loss, water content, chemical oxygen demand (COD) and acid-volatile sulfide (AVS) level were also significantly higher in the crushed oyste shell added substratum. Survival of the clams transplanted to the crushed oyster shell added substratum was significantly higher and all the clams transplanted to the normal muddy substratum died in August 2009, 13 months after the transplantation. At the end of the experiment in April 2010, the transplanted clams reached 36.10 mm in shell length and 8.92 g in total weight with survival of 43.5%. Our study suggested than crushed oyster shell added in the mud dominant substratum greatly improved living condition and survivability of clams.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.37-38
• /
• 2023

The purpose of this study is to manufacture mortars incorporating oyster shells and install them in the form of shaped, shaped butt joints, and flat boards to see what difference there is in the back temperature depending on the joint method and the type of installation. Based on the fact that similar backside temperatures were measured regardless of the presence or absence of a joint It is judged that the joint will not affect the backside temperature if it is constructed closely, In the case of ㄱ shaped, it is believed that the backside temperature higher than the backside temperature of the flat board was measured because heat accumulates on the backside during heating.

• The Journal of Fisheries Business Administration
• /
• v.43 no.3
• /
• pp.31-41
• /
• 2012

This paper was conducted to study the economic valuation for Nursery-Phase production of the tidal flat oyster in Korea. Benefit-cost(B/C) model used to indicate the effects of economic valuation. Using discounting rates(i.e., 4.5%, 6.5% and 8.5%), the model compared revenues and costs that occur at different times from 2012 to 2018. This study also estimated various submodels, which are Benefit Cost Ratio(B/C ratio), Net Present Value(NPV), Internal Ration of Return(IRR), to compare profit of Nursery-Phase production styles and analyzed returns to evaluate the scenarios. Sensitivity analysis were conducted for various scenarios. The results suggest as follows. First, the oyster spat to the shell height of 3~5cm was more profit than the shell height of 1~3cm. Second, all of sensitivity analysis with submodels were economic valuation such that B/C ratio > 1, NPV > 0 and IRR > discounting rate. Third, the payback period was about 3years after installed Nursery-Phase production system.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.4
• /
• pp.434-444
• /
• 2021

The decrease in fatness of the Pacific oyster Crassostrea gigas, which consequently results in decrease in the profit of aquaculture industry, has become a source of serious concern in southeast coast of Korea. The ratio of flesh (edible portion) to total oyster weight, commonly called edible portion yield ("suyul" in Korean), have been used as a fatness index for the healthy and valuable state of oyster from the early stage of oyster farming in Korea. More than 360 data sets were collected from early culturing periods (in the 1970s) to the present from approximately 15 published literatures to evaluate the long-term fatness trend of oyster, reared particularly in submerged longline culturing system in Gyeongsangnam-do province. Slight decrease in oyster fatness during the 1970s to 1990s was detected in Tongyeong and Geoje Bays; however, from the 1990s to the present, clear decreasing trends were observed with a decrease of 0.04-0.08% year^-1, especially during harvest season. Oyster mass production per unit area almost doubled within a short period in the early 2000s; however, changes in coastal environment factors inhibited the fattening of shellfish from the mid 1990s. These results indicate that the severe competition in feeding and low biological production in water column might be some convincing reasons for the decrease in fatness of oyster from the 1990s, in Tongyeong and Geoje Bays, Korea.

• Clean Technology
• /
• v.19 no.2
• /
• pp.90-94
• /
• 2013

We investigated one-dimensional thermal conduction for gypsum objects incorporating oyster shell powder. We presumed that according to the portion of oyster shell in the hybrid structure conductive characteristics of that would also change as some physicochemical properties such as volatile organic compound (VOC) adsorption were found to be changed considerably. Based on Fourier's 2nd law of heat conduction an analytical analysis in a flat slab (one axis perpendicular to an infinite plane) was performed. We found that composition of oyster shell and conduction-related coefficients and parameters could greatly influence on the thermal profile of that conduction, and some model experiments also served for it in the affirmative.