• Journal of ILASS-Korea
• /
• v.17 no.1
• /
• pp.14-19
• /
• 2012

The present study conducts experimental investigation on spreading and deposition characteristics of a $4.3{\mu}l$ de-ionized (DI) water droplet impacting upon aluminum (Al 6061) flat and textured surfaces. The micro-textured surface consisted the micro-hole arrays (hole diameter: $125{\mu}m$, hole depth: $125{\mu}m$) fabricated by the conventional micro-computer numerical control (${\mu}$-CNC) milling machine process. We examined the surface effect of texture area fraction ${\varphi}_s$ ranging from 0 to 0.57 and impact velocity of droplet ranging from 0.40 m/s to 1.45 m/s on spreading and deposition characteristics from captured images. We used a high-speed camera to capture sequential images for investigate spreading characteristics and the image sensor to capture image of final equilibrium deposition droplet for analyze spreading diameter and contact angle. We found that the deposition droplet on textured surfaces have different wetting states. When the impact velocity is low, the non-wetting state partially exists, whereas over 0.64 m/s of impact velocity, totally wetting state is more prominent due to the increase kinetic energy of impinging droplet.

• Korean Journal of Heritage: History & Science
• /
• v.34
• /
• pp.4-18
• /
• 2001

Paekche black potteries are earthenwares begun to be produced at the beginning of Paekche Dynasty, around 3-century. They have typical Paekche style. Representative Paekche earthenwares are burnished black pottery, long oval shaped pots and shoulder pots. Among these, burnished black potteries are limited to Paekche in the occurrence site and age. Their numbers are a few. To reproduce black pottery, their compositions were analyzed. As a result of X-Ray analysis, quarts, feldspar, illite, muscovite, and anorthite were found on their surfaces and imsides spinel and vermiculite were found on their surfaces. Since same constituent minerals were found on surfaces and their insides, special other materials were not added to make surface black. With the showing vermiculite, they were made higher than $800^{\circ}C$. As a result of analysis, fine grained clay bad been influenced by the black smoke. Its luster was appeared by polishing with a big flat wooden spoon. The black color was made of smoking when the hot pot taken off from burning oven was covered with the wet pine leaves.

• ETRI Journal
• /
• v.19 no.2
• /
• pp.71-81
• /
• 1997

We report on the room-temperature-growth of highly uniform and ultrathin Ag films on Sb-terminated Si(111) surfaces, as evidenced from a scanning tunneling microscopy (STM) study in an UHV system. With predeposition of one monolayer (ML) of Sb, uniform growth of Ag islands was observed at room temperature. The Sb layer suppresses the surface diffusion of Ag atoms on Si surface and increases the Ag island density, and then the increased island density is believed to cause coalescence of Ag islands before the beginning of multilayer growth in higher coverages, resulting in the growth of atomically flat and uniform islands on the Sb surfactant layer.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2010.06a
• /
• pp.64-65
• /
• 2010

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.81-87
• /
• 1991

A design of a four-mirror optical system for submicron lithography using KrF excimer laser beam(λ=248nm) is presented. By using the third order aberration theory, analytic solutions for a telecentric, flat-field, and anastigmatic four-spherical-mirror system (reduction magnification 5$\times$) are found. Aspherization is carried out to the spherical mirror surfaces in order to reduce the residual higher order aberrations and vignetting effect. Finally we obtain a reflection system useful in submicron lithographic application.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.1577-1580
• /
• 2012

The orientational and dynamic behavior of liquid crystal molecules on the alignment layer surfaces of liquid crystal display (LCD) devices is crucial to their performance, but there are only a few methods of experimentally elucidating the interactions between the liquid crystals and the alignment layers. Inspired by the natural and technical similarities between membrane proteins in lipid bilayers and liquid crystals in LCDs, we employed solid-state NMR methodologies originally developed for the study of membrane proteins in lipid bilayers for the in-situ analysis of liquid crystal display panels. In this article, we present a home-built 500 MHz narrowbore (NB) The orientational and dynamic behavior of liquid crystal molecules on the alignment layer surfaces of liquid crystal display (LCD) devices is crucial to their performance, but there are only a few methods of experimentally elucidating the interactions between the liquid crystals and the alignment layers. Inspired by the natural and technical similarities between membrane proteins in lipid bilayers and liquid crystals in LCDs, we employed solid-state NMR methodologies originally developed for the study of membrane proteins in lipid bilayers for the in-situ analysis of liquid crystal display panels. In this article, we present a home-built 500 MHz narrowbore (NB) $^{19}F-^{13}C$ double resonance solid-state NMR probe with a flat-square coil and the first application of this probe for the in-situ analysis of LCD panel samples. double resonance solid-state NMR probe with a flat-square coil and the first application of this probe for the in-situ analysis of LCD panel samples.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2006.09a
• /
• pp.112-121
• /
• 2006

The vertical displacement of a ship on the basis of the sea level is an important parameter for its stability and control. To indicate the displacement on operating conditions, "draft marks" are carved on the hull of the ship in various ways. One of the methods is welding. The position, shape and size of the marks are specified on the shipbuilding rules by classification societies to be checked by shipbuilders. In most cases, high-skilled workers do the welding along the drawing for the marks and welding bead becomes the marks. But the inaccuracies due to human errors and high labor cost increase the needs for automating the work process of the draft marks. In the preceding work, an indoor robot was developed for automatic marking system on flat surfaces and the work proved that the robot welding was more effective and accurate than manual welding. However, many parts of the hull structure constructed at the outdoor are cowed shapes, which is beyond the capability of the robot developed for the indoor works on the flat surface. The marking on the curved steel surface requiring the 25m elevations is one of the main challenges to the conventional robots. In the present paper, the robot capable of climbing vertical curved steel surfaces and performing the welding at the marked position by effectively solving the problems mentioned earlier is presented.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.4-4
• /
• 2012

Proteins enable biology to be viable through molecular interactions (such as in antigen-antibody, ligand-receptor, and drug-target) with

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.2
• /
• pp.295-303
• /
• 2009

Forging of square spline was investigated by using finite element methods in this study. Spline is widely used by torque transmitter in the fields of automobile, aircraft, and shipping etc. Friction on the surface of die is regarded as the most important factor to improve the dimensional accuracy for complete forming of spline teeth. Finite element simulation was carried out to improve the formability of the spline, especially remove unnecessary burrs which were extruded in gap between the die and the punch. To remove the burrs, various friction factors are considered on the surfaces of the die in the simulations and punch flat surface was designed. The simulated results were compared with experimental ones. As a results, it is possible to control the growth of burrs and improve formability of spline teeth by applying various friction factors and design of punch flat surface.

• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.183-190
• /
• 1996

To design three-mirror telescope system (F/8, 120 inch in focal length) for visible and infra-red band imaging, methods for power configuring and correction of the third order aberrations were studied. In the design of the telescope system, a three-mirror system corrected for spherical aberration, coma, and astigmatism was used for infra-red imaging, and the aberrations were corrected by using conic surfaces. For visible imaging, a singlet corrector lens was appended at the front of the focal plane to correct filed curvature. The telescope system has diffraction limited performance for 10 ${\mu}{\textrm}{m}$ in wavelength within 2.4$^{\circ}$ of field-of-view. In the visible band imaging, the rms spot size of the telescope system is less than 25 ${\mu}{\textrm}{m}$ within 3$^{\circ}$ of field-of-view for monochromatic light, and the telescope system satisfies flat field condition for CCD application.