Deep-drilled core sampling and high-resolution seismic survey were carried out to identify a Holocene-late Pleistocene boundary in Gyeonggi Bay, western coast of Korea. Analysis of core sections revealed the existence of an oxidized and semi-consolidated sediment layer, Iying immediately below a Holocene horizon (Unit I) and being developed at the top of a late Pleistocene deposit (Unit II). The oxidized sedimentary layer (uppermost part of Unit II) is characterized by semi-consolidated, yellowish sediments showing signs of desiccation and alteration such as high N value, low water content, periglacial cryogenic structure, depletion of smectite, and high geochemical weathering index (Ba/Sr ratio). This feature, together with radiocarbon ages, suggests that the layer has formed as a result of prolonged subaerial exposure of Unit II sediments during the late Wisconsin sea-level lowstand, producing a regional unconformity. Such unconformitic-bounding surface corresponds to a prominent near-surface reflector (R), which is observed in seismic profiles obtained across the drilled-core sections in the study area. Consequently, the buried oxidized-sedimentary layer associated with the seismic reflector possibly plays a key horizon for the understanding of late Quaternary environmental changes as well as evidence of the emergence of the Yellow Sea shelf during the late Wisconsin sea-level lowstand.
Lee, Chun Yong;Lee, Won Kyu;Park, Seung Kul;Kim, Kap Sung;Oh, Min Young
Journal of Korean Society of Forest Science
/
v.76
no.3
/
pp.200-205
/
1987
This study was carried out to examine the proper site for Pinus rigida ${\times}$ P. taeda. The 91 sample plots ($20{\times}10m$) were selected from the plantations located in middle part of Korea. Soil, environmental and climatic factors were investigated and regressed on the growth of Pinus rigida ${\times}$ taeda. (1) The factors which influenced strongly on the growth were temperature, elevation, soil moisture, physiographic position, slope, soil depth, wind protection, soil compactness and soil organic matter contents in order. (2) The most effective factors among them were temperature, elevation, soil moisture and physiographic position. (3) General conditions of proper site for planting the hybrid pine were above $-8^{\circ}C$ in mean minimum temperature in January, below 200m in elevation, moderate soil moisture, and valley or flat area in physiographic position.
This study aims to identify spatial distribution of estuarine wetlands in Korea, and to assess temporal variation of the wetlands in the last few decades. Widely known in environmental and coastal management, watershed-based regions which composed with Han-river(western and eastern parts), Keum-river, Yeoungsan-river, Seomjin-river, Nakdong-river, and Jeju, are analyzed to evaluate temporal change of estuarine wetlands in the 1980s, 1990s, and 2000s, through the land-cover map. Results show that estuarine wetlands dramatically decreased in Han-river(western part), Keum-river, Yeoungsan-river that estuarine circulation have been interrupted with man-made structures such as dyke and drainage. But, estuarine wetlands surrounded by forests and grasslands has been relatively less damaged. Habitat diversity providing healthy estuary ecosystem is lower in interrupted estuaries than circulated estuaries, which are composed of tidal-flat, open water, salt marsh, rocky coasts and sandy shoreline. This study indicates that spatial distribution and temporal variation of estuarine wetlands are different with estuary type and region, so estuary type with seven regions can be applied to provides a framework for estuary management strategies and to establish estuary restoration plans.
In land seismic exploration, irregular surface topography and weathering layer in near surface distorts the reflected signals of data. Therefore, typical land seismic data should be compensated for this distortion by static correction. To perform the static correction, near-surface velocity is required, which can be obtained by seismic refraction survey. However, land seismic data is often acquired in a limited form of geometry depending on the equipment availability, accessibility condition, and permission for the survey site. In this situation, refraction analysis should be performed using reflection data because it is impossible to acquire refraction-oriented data due to limited source and receiver geometry. In this study, we aimed to analyze the reliability of the results obtained by refraction traveltime tomography when using reflection data with a limited number of sources and receivers from irregular surface topography. By comparing the inversion result from irregular topography with that from flat surface, we found that the surface topography affects the reliability of the inversion results to some degree. We also found that the number of sources has little effect on the inversion results unless the number of sources are very small. On the other hand, we observed that velocity distortion occurred in the overlapped part of receiver arrays when using a limited number of receivers, and therefore suggested the size of the least overlapping ratio to avoid the velocity distortion. Finally, we performed numerical tests for the model which simulates the surface topography and acquisition geometry of the survey region and verified the reliability analysis of inversion results. We identified reliable areas and suspicious area of the inverted velocity model by applying the analysis results to field data.
The small octopus(Octopus minor), a species in the cephalopod class spawns the fewer eggs compared with its relatives such as Octopus vulgaris and Octopus ocellatus and exerts special efforts in nursing eggs hiding in the deep cave beneath the mud flat. Correspondingly, its embryogenic process had been hardly observed. In this study, we induced the small octopus to spawn its eggs in the artificial spawning tube and to nurse the developing embryos under the periodical observation. The early embryogenic change in the fertilized eggs was appearance of blastodisc on the animal pole at 4 days after spawning. A mass of rudiments of several organs developed in the middle of the yolk sac at 28-th day and it moved gradually toward the animal pole. At 38 days after spawning, two eyes appeared on the head and the trunk with heart developed on the apical part of the yolk sac. At 45-th day of embryonic development, the trunk and head occupied a half of the egg capsule and consequently the yolk sac was reduced to a half of its original size. Two eyes became prominent at the bottom of the trunk with several spots at day 60. Embryonic development was completed at about 80 days after spawning and the arms stuffed the lower half of egg capsule. The young fry squeezed out of the egg capsules with their long and slender arms first and mantles later. Soon after hatching, it swam actively and squirted ink.
Rare metal (Nb-Zr-REE) ore deposits are located in the Chungju area. Geotectonically, the rare metal ore deposits are situated in the transitional zone between Kyeonggi massif and Okcheon belt. The rare metal deposits are distributed in Kyemyeongsan Formation which consist of schist and alkaline igneous rocks. Alkali granite has suffered extensive post-magmatic metasomatism and hydrothermal processes. The ore contains mainly Ce-La, Ta-Nb, Y, Y-Nd, Nd-Th group minerals. More than 15 RE and REE minerals are found in the ore deposits. Allanite, one of the Ce-La rich REE minerals belonging to the epidote group, is the most common mineral in the studied area. The allanite- bearing rocks may be devided into seven types by features of occurrence and mineral associations; zircon type (ZT), allanite-vein type (AT), feldspar type (KT), fluorite type (FT), quartz-mica type (QT), iron-oxide type (MT), and amphibole type (HT). The allanite veins (AT) and zircon rich rocks (ZT) contain the highest total REE contents. Differences in REE abundance can be interpreted in terms of varying portions of magmatic hydrothermal fluid. Petrographical and chemical data are presented for allanites which were collected from different types. The allanites show wide variations in optical properties, due in part to differences in their chemical composition (depending on the types) and to the degree of crystallinity of the individual specimens. Allanite metamicts in biotite are generally surrounded by well developed pleochroic haloes. Usually, allanite is accompanied by zircon and other REE-bearing minerals. CaO and total REE contents $({\sum}RE_2O_3)$ range from 9.29 to 18.79% and 11.66 to 26.31%, respectively. Also, SiO, (28.87~32.61%), $Al_2O_3$ (8.30~16.88%), and $Fc_2O_3$ (16.74~24.38%) contents show varying contents from type to type. The ${\sum}RE_2O_3$ of allanite has positive relationships with $Fe_2O_3$ and negative relaton with CaO, $SiO_2$, and $Al_2O_3$ Backscattered electron microscope images (BEl) of allanite shows that the its mineral composition and texture is very complex. The allanite-bearing hosts show distinct light REE enrichment with strong negative Eu anomaly except for HI. The HT has an almost flat REE distribution pattern with a small negative Eu anomaly. The chemical variation of the allanites with occurrences and mineral association can be related to condition of temperature and oxidation states in precipitation environment.
Water quality and ecological environment in the Han River estuary was analyzed using the longterm water quality monitoring data from National Fisheries Research and Development Institute (NFRDI) and the existing data collected in this area. Based on the salinity distribution and changes of current direction in the lower Han River and its estuary, boundaries of the estuary were identified and also, distribution patterns of the phyto- and zooplankton, benthos, ichthyoplankton and fish were discussed related with the salinity changes in the macrotidal subestuary of Han River. Seasonal and spatial distribution of salinity suggested that the direct impact of freshwater be limited to the Incheon North Harbour all the year round and even extended to the southern area of Gyunggi Bay near Palmi island during limited time, usually in summer. Upper limit of salt water intrusion through the Han River is likely to be Singok underwater dam located Gimpo, Gyunggi Province, and normally limited to much lower part of the river, Jeonryuri, Gimpo. Biological boundaries of the Han River estuary exceeded the physical boundaries based on the salinity distribution. Many estuarine species in plankton and fish were found at the totally freshwater or saltwater depending on the seasons and tidal cycles. Some estuarine ichthyoplanktons showed extremely limited distributions in the estuary whereas adult fish revealed wide ranges of salinity adaptation. Critical environmental issues in the Han River estuary and its drainage basin are likely to be 1) pressure on development-promoted district for new town in the drainage area of the estuary, 2) reduction of tidal flat by reclamation, 3) pollutant input through river from municipal sewages and industrial wastes, and 4) ecological barrier between river and terrestrial systems by the military wire fence and riverside road.
Nowadays the information exchange based on XML such as B2B electronic commerce is spreading. Therefore a systematic and stable management mechanism for storing the exchanged information is needed. For this goal there are many research activities for concerning the connection between XML application and relational databases. But because XML data has hierarchical structure and relational databases can store only flat-structured data, we need to make a conversion rule which changes the hierarchical architecture to a 2-dimensional format. Accordingly the modeling methodology for storing such structured information in relational databases is needed. In order to build good quality application systems, modeling is an important first step. In 1997, the OMG adopted the UML as its standard modeling language. Since industry has warmly embraced UML, its popularity should become more important in the future. So a design methodology based on UML is needed to develop efficient XML applications. In this paper, we propose a unified design methodology for XML applications based on relational database using UML. To reach these goals, first we introduce a XML modeling methodology to design W3C XML schema using UML and second we propose data modeling methodology for relational database schema to store XML data efficiently in relational databases.
A heavy fluid is injected to a rotating cylindrical container of flat or inclined bottom filled with homogeneous lighter fluid. Continuous flow-in and spreading patterns over the bottom of the container are observed and at the same time upper-layer motions induced by the movement of the heavy fluid are traced by thymol blue solution. Regardless of bottom geometry, the injected denser fluid is deflected toward "western wall" and continuous its path along the boundary with radial spreading which occurs in the bottom boundary layer to make a quite asymmetric flow. When the bottom contains a slope(${\beta}$-plane), increased pressure gradient causes the fluid move faster to produce a stronger Coriolis force. This makes the width of the flow narrower than that of f-plane. But, when the denser flow reaches the southern part of the container, a local-depth of denser fluid increases (much greater than the Ekman-layer depth) such that the spreading velocity along the wall is reduced and the interfacial slope increases to make the upper-layer adjust geographically to have oppositely directed upper-layer motion along the interfacial boundary. The role of the denser fluid in terms of vorticity generation in the upper-layer is such that it produces local topographic effect over the western half of the container and also induces vortex-tube stretching which is especially dominant in the f-plane.
Journal of the Korean Society of Clothing and Textiles
/
v.34
no.2
/
pp.303-317
/
2010
This study helps in the production of brassieres suitable for female adults by researching the actual wearing conditions and purchasing status, satisfaction rate, and preferences of female college students in their early 20's. The collected data was analyzed by a SPSSWIN 13.0 Program and the results of the research are as follows. 1. There is a noticeable difference between the breast satisfaction rate and breast size, in addition the satisfactory rate was higher in the normal breast size or a little ample size than in the very small or very big size. According to the shape, the satisfactory rate for the breast appeared to be high in the case of the recognition and evaluation of the hemisphere type than the flat, cone, pop out, and downward type. 2. For fitness, the looseness at the top of the cup (pressed between the breasts at the upper part of the front middle), pressing and looseness at the upper sides of the cup, inappropriate size of the cup, tightness of the wings, tightness at the bottom round of the breasts, the narrow width of the wire, wide space of the shoulder strings, and the sliding of the shoulder strings had problems that needed improvement. 3. The major priorities for purchasing brassieres are size, fitness, and aesthetic qualities. As a result, the size and the fitness are more important than the trend or decorations since the brassiere has the function to support the breasts that shows that hygiene and sanitation are recognized as an important standard for undergarment selection. The size and the fitness are important factors regardless of breast types in the examination of the selection standards of the brassieres for each breast type, but the cone and hemisphere types have higher preferences for design; the pop out type has more considerations for the material of the cloth. The result show that appearance is more important for smaller breasts, but the functionality of the brassier is more important than the appearance for medium and larger breast sizes.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.