• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.6
• /
• pp.11-20
• /
• 2014

This paper aims at comparing and analyzing shear buckling characteristics between sinusoidal corrugation shape and trapezoidal one. For this, I adopted the equal-length trapezoidal corrugation and sinusoidal one for the analytical models, and analyzed their shear buckling characteristics through linear buckling analysis and on its theory. Generally, the shear buckling shapes of corrugated steel plates are classified into local buckling, global buckling, and interactive buckling from the two buckling modes. Sinusoidal corrugation shape, unlike trapezoidal corrugation, does not have flat sides, which causes another tendency in shear buckling mode. Especially, the changes and different aspects of shear buckling on the boundary between local buckling and global buckling appear in different corrugation shapes. According to the analysis results, interactive buckling mode appeared on the boundary of local buckling and global bucking in trapezoidal corrugation. However, in the case of corrugated steel plates with sinusoidal configuration, interactive buckling mode appeared in the part where global bucking takes place. Besides, trapezoidal shapes are of advantages on shear buckling resistance in the local buckling section, and so are sinusoidal shapes in the global buckling section.

• The KIPS Transactions:PartC
• /
• v.13C no.1 s.104
• /
• pp.103-112
• /
• 2006

Since sensor node has a limited energy supply in a wireless sensor network, it is very important to maximize the network lifetime through energy-efficient routing. Thus, many routing protocols have been developed for wireless sensor networks and can be classified into flat and hierarchical routing protocols. Recent researches focus on hierarchical routing scheme and LEACH is a representative hierarchical routing protocol. In this paper, we investigated the problems of the LEACH and proposed a novel energy efficient routing scheme, called ENTER(ENergy efficient Two-tiEr Routing protocol), to resolve the problem. ENTER reduces an energy consumption and increases a network lifetime by organizing clusters by the same distributed algerian as in the LEACH and establishing paths among cluster-heads to transmit the aggregated data to the sink node. We compared the performance of the ENTER with the LEACH through simulation and showed that the ENTER could enhance the network lifetime by utilizing the resources more efficiently.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.4
• /
• pp.229-235
• /
• 2014

This study conducted a research on burn-out printing convergence technology for cellulose blend knit fabrics. Printing technology, which forms color pattern on the fabric, can be generally classified into four according to printer or printing method, e.g. screen printing, roller printing, rotary printing, digital printing. However, these printing methods are flat in design or pattern, which have limitation to overcome monotonousness of fabric, so that recently burn-out process method, which expresses three-dimensional pattern effect by treating chemical on the surface of fabric as the method to appeal its esthetics to the customers. Particularly, in case of cellulose/polyester composite material, first, it is proceeded in 2 processes, by dyeing cellulose or polyester fabric and burning out cellulose fabric, in this process, due to pollution caused by disperse dye migration, color of polyester fabric part could be discolored, which has high falt risk. This research considered coloring burn-out technique, which simultaneously proceed dyeing and burn-out by reducing dyeing and burn-out process to 1 stage, which were proceeded in 2 stages previously. As the research result, it was confirmed that reasonable depth of roller was 0.04~0.06mm in roller printing process, heat treatment condition of burn-out far-infrared radiation was $185^{\circ}C{\times}30m/min$. Color fastness to washing was confirmed to be 4-5 grade, color fastness to rubbing, 3-4 grade, color fastness to light, 4 grade. Also, it was confirmed that energy reduction effect appeared 38.19%, in case of energy cost per yard compared to the existing production, also, 19.74%, in case of production cost.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.621-624
• /
• 2011

Recently, augmented reality is divided into broadly marker based and markerless based as part of HCI (Human Computer Interaction). Markerless based is augmented object using natural features in real-world environment. On the other hand, Marker based is use to calculate easily the coordinates and exactly augmented object using flat marker of rectangular. However, marker-based image is provided due to the presence of the marker in a markerless, giving users a more less realistic and immersive view. In this paper, We research about combined diminished reality and augmented reality for Marker-Based Augmented Reality System Structure using Object Removal Tchnique in order to increase realistic and immersive view.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.2
• /
• pp.167-172
• /
• 1986

This experiment was carried out to obtain some information about the growth habit and morphological and anatomical characteristics of fasciated soybean, var. Buchai-kong. The results obtained are summarized as follows: 1. Main stern of fasciated soybean, var. Buchai-kong was gradually broadened and became flat, on which leaves emerged irregularly compared with normal soybean, var. Danyeop-kong. The number of leaves on main stern was more in Buchai-kong, but the total number of leaves per plant was not considerably different each other. 2. The degree of fasciation (max./min. in diameter at the broadened part) in main stern of Buchai-kong was about 3.1, and was related to the amount of growth of main stern and branches of Danyeop-kong. Stern fasciation types found in Buchai-kong were linear (the most common) and bifurcated with regard to branching of main stern tip. 3. The number of branches per plant was much less in Buchai-kong than in Danyeop-kong. There were fas-ciated branches and fasciated petiole in Buchai-kong. 4. About 75 percent of pods of Buchai-kong were concentrated on the top of stern, which showed strong pod clustering. 5. Seed yield per plant of Buchai-kong was about 60 percent of that of Danyeop-kong, and the decrease in seed yield was mostly affected by the decrease in seed weight and seeds per pod. 6. The number of vascular bundles of transection of mature stern was more in Buchai-kong, but Danyeop-kong developed the better vascular bundle.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.11
• /
• pp.1399-1408
• /
• 2011

This study analyzes the current educational curricula in the field of clothing construction to provide some fundamental information for developing more appropriate educational courses and to activate the fashion business. A total of 82 different departments related to fashion and apparel were selected from four-year domestic universities and the curricula recently posted on their internet websites were analyzed by descriptive statistics. More than half (53.7%) of the 82 departments were offering classes in the clothing construction field for 3 credits and 4 class hours. College affiliation of the departments that offered curricula in the clothing construction field was classified into 5 categories: the arts (34), human ecology (22), natural sciences (14), humanities/culture (9), and others (3). Human ecology category showed the highest results in the average class hours (3.9), the number of classes in the clothing construction field (7.6), and the percentage of the classes in the clothing construction field out of all major classes offered by the clothing department (19.9%). All 82 departments were classified into 3 categories of: fashion design (32), clothing (28), and fashion business (22). The clothing category showed the highest results in the average credits (2.8), class hours (3.8), the number of classes offered by the clothing construction field (7.6), and the percentage of the classes that offer clothing construction education out of all major classes offered by the clothing department (19.9%). The educational contents of clothing construction area were classified into 8 different categories of: basic theory and sewing, clothing construction, flat pattern, draping, tailoring and advanced clothing construction, pattern CAD, sewing science and apparel manufacturing process, and clothing construction for special needs. Among these categories, the draping category constituted 21.7% as the largest part. In addition, the distribution of classes offered by 4 academic years were analyzed into 8 different categories.

• The KIPS Transactions:PartB
• /
• v.13B no.2 s.105
• /
• pp.187-196
• /
• 2006

In 3D animation most people adjust the moving motion of their characters on various terrains by using motion data acquired with the motion capture equipment. The motion data can be used to present real human motions naturally, but the data must be captured again to apply to the different terrains from those given at acquiring mode. In addition, there would be a difficulty when applying the data to other characters, in that case the motion data must be captured newly or the existing motion data must be heavily edited manually. In this paper we propose a unified method to generate human motions of walking and running for various terrains such as flat plane, inclined plane, stairway and irregular face. With these methods we are able to generate human motions controlled by the parameters : body height, moving speed, stride, etc. In the proposed methods, the positions and angles of joint can be calculated by using inverse kinematics, and we calculate the trajectory of the swing leg and pelvis according to the cubic spline. With these methods we were presented moving motions using a model of a human body.

• Journal of radiological science and technology
• /
• v.4 no.1
• /
• pp.55-62
• /
• 1981

This study was conducted, during the period of 20-30th, July in 1981, to survey measurement methods in thyroid uptake rate test in Seoul city. The results were summarized as follows: 1. For the great part of nuclear medcine department, a mount of radioiodine($^{131}I$) administrated to the patients was $50-100{\mu}Ci$ in thyroid uptake rate test. 2. Distribution of scintillation, counter with crystal size of $1\frac{1}{2}inch$ was 43%, 3inch(22%), 2.5inch(14%) and $2\frac{1}{2}inch$ was 7% in RAI uptake rate test. 3. When RAI uptake rate test was performed, distribution of collimator in use was flat field type collimator(78%) in general and cylindrical type collimator was 22%. 4. High voltage applied to the P-M tube was $900{\sim}1000V$(50%) and most units provided $3{\sim}15%$ of the window range for the $^{131}I$ peak $\gamma-ray$ energy. 5. Distribution on the use of neck phantom for measurements standard solution was 57% and distribution of b filter in use for room background counts and extrathyroidal tissue was 43% and 50%. 6. The distance between the counter and the source was 25cm(58%) in measuring radioactivity of standard solution, thyroid tissue and background radioactivity count. 7. The early uptake measurements(2, 4, 6 hours) are done after administration of the radioiodine dose and also 24-hour and 48-hour uptake measurements are done in routine test.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.3
• /
• pp.189-195
• /
• 2007

The purpose of this study was to analyze the effects of shoes with curved out-sole on the pressure, reaction force(sum of pressure) on foot and relations between the rolling speeds and pronation of foot. The foot pressure, reaction force and pressure center on the foot surface of shoe were measured with NOVEL padar system, and 3 type shoes were used to compare the position and speed of pressure center and the foot reaction force, which were s(target) shoe with soft cushions in middle part of out-sole and curved out-sole, m shoes with two type- soft, hard, hardness out-sole and curved out-sole and n shoes with flat out-sole. The subjects were 13 female university students, had weared the 3 type shoes for 6 weeks on two-weeks shifts for adaptation before experiment and put on 3-type shoes repeatedly and randomly and walked on treadmill with 3.5km/h and 80 steps/min. The data were captured with 30Hz and readjusted with 5kgf threshold reaction force. The results can be summarized as follow. 1. There were no difference in maximum reaction force on initial contact period and total foot impact, but statistical difference in maximum reaction force on takeoff period : s, m, n in ascending order. 2. There were some difference in rolling speeds for support periods. At initial contact, the rolling speed of s shoes was fastest but at periods between first and second maximum reaction force, that of m shoes fastest. 3. There was a negative relation between rolling speeds and the length of lever arm on initial reaction force related to pronation. It seems shoes with various curved shapes and hardness could make effects on the rolling features and the rolling speed also have some relationships with walking efficiency, absortion of impact and pronation.

• Archives of Plastic Surgery
• /
• v.37 no.6
• /
• pp.788-794
• /
• 2010

Purpose: The fingertip is the most commonly injured part of the hand and its injury frequently results in avulsion or crushing of a segment of the nail bed and fracture of the distal phalangeal bone. Restoration of a flat and smooth nail bed is essential for regrowth of a normal nail, which is important not only for cosmetic reasons but also for tactile capability of the fingertip. It is also anatomical reduction of the distal phalanx to promote patient's cosmetics and prevent nail bed deformity. Absence or no replacement of the nail plate results in obliterated proximal skin fold. When the avulsed nail plate cannot be returned to its anatomic position or when it is absent, we use a synthetic material for splinting the nail bed and alternative reductional method for distal phalangeal bone fracture, especially, instead of hardwares. Methods: From January of 2006 to June of 2009, a total of ten patients and fourteen fingers with crushing or avulsion injuries of the fingertip underwent using the artificial nails for finger splint. We shaped artificial nails into the appropriate sizes for use as fingernail plates. We placed them under the proximal skin fold and sutured to the fold proximally and to the lateral and medial edges of the nail bed or to the distal fingertip. Our splints were as hard as K-wire and other fixation methods and more similar to anatomic nail plates. Artificial nails were kept in place for at least 3 weeks. Results: No artificial nail related complication was noted in any of the ten cases. No other nail fold or nail bed complications were observed, except for minor distal nail deformity because of trauma. Conclusion: In conclusion, in order to secure the nail bed after injury and reduce the distal phalangeal bone fracture, preparing a nail bed splint from a artificial commercial nail is a cheap and effective method, especially, for crushed or avulsion injuries of the fingertip.