• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.900-905
• /
• 2004

Development of color printer, postal classification machine, ATM and so on requires higher moving performance of the flat belt. Skew of the flat belt running over misaligned roller has a bad effect on performances of media transport. The vibration of loose side of belt causes the escape of the belt from roller and the drop of velocity of driven roller after the start of driving roller revolution. The skew of flat belt is investigated by FEM and dynamic simulation. FEM results show parameters which affect the skew of belt and match with dynamic results qualitatively. The shape of loose side of belt can be found by dynamic simulation. Increase of the acceleration time and initial tension have diminished the unstable movement of the loose side of belt.

• 대한기계학회논문집
• /
• 제11권5호
• /
• pp.772-780
• /
• 1987

본 연구에서는 면직 및 고무 평벨트에 대하여 베트와 풀리간의 수직 및 접선 마찰력 분포를 측정하고 이들의 마찰특성을 비교하고자 하였다. 마찰접촉면적을 직 접 측정하는 대신, 표면모델에 의한 이론식을 제시하고 이론식과 실험에 의한 수직 및 접선력을 비교하여 마찰면의 표면모델과 마찰계수를 연구하였다.

• 한국제4기학회지
• /
• 제20권1호
• /
• pp.1-8
• /
• 2006

인천 국제공항 고속국도 건설을 위하여 영종북 갯벌에서 많은 시추 조사가 이루어졌다. 이 시추 자료를 분석하여 이 갯벌 퇴적물의 수직 구조를 검토했다. 영종북 갯벌의 퇴적층 두께는 대략 30m이고, 하부로부터 기저 사력층, 하부 점토층, 중부 실트층, 중부 점토층, 상부 실트층이 차례로 퇴적되어 있었다. 황갈색의 반고 화된 산화대는 $-3{\sim}-5m$ 고도에서 중부 점토층 윗면 혹은 중부 점토층 내에서 나타났다. 산화대 윗면을 선현세 갯벌층과 현세 갯벌층 간의 부정합면으로 인정하기에는 퇴적 단면 구조의 해석상 어려운 점이 많았다.

• 한국정밀공학회지
• /
• 제12권3호
• /
• pp.101-109
• /
• 1995

Axisymmetric and quasi-static finite element analysis of an inflated tire rotating with constant angular velocity and contact to road has been performed. Centrifugal force effect was added to load stiffness matrix and equation of effective material properties were calculated by the Halpin-Tsai formulation. In this report, radial truck/bus tire was analyzed. It was inflated and rotated at speeds up to 140 km/h. Then, contact problem was performed to calculate stress-strain field of tire wiht flat rigid road under the load due to the self-weight of a vehicle. Significant changes of stress-strain field of tire were observed in the finite element analysis. Shear stress, strain and strain energy density were rapidly increased at the dege of #2 belt at freely rotating state. This concentrated stress and strain made belt edge sparation. Under the condition of flat riged road contact, strain energy density of #2 belt, carcass turn-up part were concentrated and bigger values than only freely rotation state. Therefore, dynamic behaivor of tire has to considered as design factors which are affected to belt edge separation and bead breakage.

• 대한기계학회논문집
• /
• 제12권3호
• /
• pp.457-465
• /
• 1988

본 연구에서는 벨트 연삭시 즉 집중하중을 받는 평벨트 구동에서 벨트와 풀리 사이의 내접촉 특성을 구하고자 하였다.준 정적평형(quasi-static equilibrium) 상 태에서 벨트구동계의 이론적 해석을 하여 집중하중점을 포함한 벨트-풀리 전접촉구간 에서 벨트장력분포를 구하고 이 결과를 실험치와 비교하였다. 본 연구에서는 집중하 중점 보다는, 집중하중의 벨트-풀리 전접촉구간에 대한 영향을 밝히는데 주안점을 두 었다.

• 복식
• /
• 제59권6호
• /
• pp.140-155
• /
• 2009

This study tries to find out the special twine technique of flat string and refers to historical documents, records, artifacts of excavated articles, and real materials. In Japan weaved cloth is called Jomul or Jonue and these methods were brought to Japan from Korea during Aska Period(645${\sim}$710) and Nara Period(710${\sim}$794). Among those knot methods, the 1/1 knot was written as a Shillajo on a documentary record at Heian Period, Engisik, and Samdaesillok which is a historic document from King Saiya to King Gowooko(858${\sim}$887). Also 2/2 knot weaving was recorded as Goryeojo that the technique originated for a long time in Japan. During the Joseon Dynasty, Gunmok was written as Dahoi, and Gwangdahoe, which means wide and flat Gunmok, was the name of Dae(Belt). The frame for the twine Gwangdahoe is no longer in Korea, but only can be found in Japan as a Goraiwoochi loom for Shillajo and Goryeojo from Korea. There are currently artifacts by the techniques of Shillajo and Goryeojo that were excavated in 15${\sim}$17C in Korea. Therefore this study was looked into the artifacts from 6${\sim}$8C in $Sh{\"{O}}so$-in, and the features of Dae (Belt) weaved by Shillajo and Goryeojo case method. Gwangdahoe excavated artifacts in the mid Jeosun Dynasty was restored by the process of Goryeojo weaving method.

• The Korean Journal of Ceramics
• /
• 제4권1호
• /
• pp.5-8
• /
• 1998

Flat belt(FB) type high pressure apparatus has been succesfully utilized in various high pressure experimental stations in Korea and Japan to conduct HPHT (high pressure and high temperature) diamond synthesis. Present paper discusses pressure calibration of FB apparatus at high temperature to establish P-T condition of diamond synthesis. We also present some examples of controling P-T condition through careful experimental set-up of the high pressure sample cells. Finally we discuss reproducibility of pressure and temperature condition of the HPHT diamond synthesis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.761-765
• /
• 1996

This paper describes the forging of circular tooth profiled gears as a series of development of simulator for non-axisymmetric parts that being used at the pump pulley, timing belt pulley etc. in automobiles. The half pitch of gear is divided into 6 deformation regious and kinematically admissible velocity fields for those regions are proposed. The neutral surface is introduced torepresent inner flow of material during forging operation with flat punch and, for each step, it is assumed as a circle. The upper bound solutions obtained from the suggested kinematically admissible velocity fields are in good agreement with experimental results and they are useful to predict the capacity of forging press for forging of circular gears.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.15-18
• /
• 1996

In the case of need for reciprocating motion, the study for application of Linear Oscillating Actuator(LOA) is being accomplished. LOA is the simpler and more efficient than other linear apparatus using the rotary motor because LOA produce the thrust force without any converter such as cam, clutch, rack, pinion and belt, etc. We designed the flat moving core type LOA and manufactured for trial. This paper shows the structure and dynamic characteristics of LOA.

• 한국의상디자인학회지
• /
• 제4권1호
• /
• pp.5-17
• /
• 2002

This study aimed to investigate the relationship between ideal images of women and women's clothing fashion England between 1820s and 1850s. The age was divided into two periods, which were 1820-1836 and 1837-1850. During the first period, the ideal images of women were those of fairy, spirit, and angels, which were expressed by tight waist belt, wider and shorter skirt, top expanded sleeve, wide and flat pelerine collar, feather decoration, elaborate and curly hair style, narrow and light ballerina shoes etc.. During the second period, the ideal images for women were those of lady with modesty, quietness, and weakness. They were expressed by long and full skirt, tight or bulge over the lower arm sleeve, dropped sleeve, poke bonnet, body wrapping large shawl and sober color etc.. The result shows that the ideal images of women in 19th century England were concretely expressed by various clothing fashion including hair style, shoes, and decoration. This study sheds light on psychological, historical, and theoretical approaches to clothing.