• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.900-905
• /
• 2004

Development of color printer, postal classification machine, ATM and so on requires higher moving performance of the flat belt. Skew of the flat belt running over misaligned roller has a bad effect on performances of media transport. The vibration of loose side of belt causes the escape of the belt from roller and the drop of velocity of driven roller after the start of driving roller revolution. The skew of flat belt is investigated by FEM and dynamic simulation. FEM results show parameters which affect the skew of belt and match with dynamic results qualitatively. The shape of loose side of belt can be found by dynamic simulation. Increase of the acceleration time and initial tension have diminished the unstable movement of the loose side of belt.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.5
• /
• pp.772-780
• /
• 1987

The normal and tangential belt forces for two types of flat belts are measured and compared. From friction theory, ti was assumed that tangential friction is proportional to the actual contact area $A_{a}$ and $A_{a}$ is proportional to normal pressure P; i.e., $A_{a}$ .var.P$^{n}$ . For a flat belt with cloth backing, the n=2/3 is obtained for the constant of belt surface model. For a flat belt with rubber backing, the n=0.9 to n=1.0 is suggested as a surface model constant. The theoretical equation developed in this paper showed agood with the experimental results.

• The Korean Journal of Quaternary Research
• /
• v.20 no.1 s.26
• /
• pp.1-8
• /
• 2006

Many boring investigations were achieved in Youngjong-North tidal flat to construct the Incheon International Airport Expressway. Vertical sedimentary profile of this tidal flat has been studied by analyzing these boring data. The deposits of Youngjong-North tidal flat are about 30 meters thick, and the sedimentary layers consist of basal gravel, lower mud, middle silt, middle mud, and upper silt layers in ascending order. Semi-consolidated and oxidized belt with yellowish brown color, which appears above or within middle mud layer, exists in $-3{\sim}-5$ meters altitude. There are some stratigraphical problems to admit the top surface of this oxidized belt as the unconformity surface between Holocene and Pre-Holocene tidal flat deposit.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.3
• /
• pp.101-109
• /
• 1995

Axisymmetric and quasi-static finite element analysis of an inflated tire rotating with constant angular velocity and contact to road has been performed. Centrifugal force effect was added to load stiffness matrix and equation of effective material properties were calculated by the Halpin-Tsai formulation. In this report, radial truck/bus tire was analyzed. It was inflated and rotated at speeds up to 140 km/h. Then, contact problem was performed to calculate stress-strain field of tire wiht flat rigid road under the load due to the self-weight of a vehicle. Significant changes of stress-strain field of tire were observed in the finite element analysis. Shear stress, strain and strain energy density were rapidly increased at the dege of #2 belt at freely rotating state. This concentrated stress and strain made belt edge sparation. Under the condition of flat riged road contact, strain energy density of #2 belt, carcass turn-up part were concentrated and bigger values than only freely rotation state. Therefore, dynamic behaivor of tire has to considered as design factors which are affected to belt edge separation and bead breakage.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.457-465
• /
• 1988

The inside contact characteristics in abrasive belt drives were investigated analytically and experimentally for (1) driver pulley contact wheel and (2) driven pulley contact wheel. The concentrated contact forces in the grinding zone divided the entire belt-pulley contact are by three distinct areas and the tangential friction forces in the active areas caused the normal forces to change, which resulted in the different belt force distribution compared with those of the ordinary flat belt drives. The experimental results for the normal pressure (belt tension) distribution were in good agreement with the theoretical results.

• Journal of the Korean Society of Costume
• /
• v.59 no.6
• /
• pp.140-155
• /
• 2009

This study tries to find out the special twine technique of flat string and refers to historical documents, records, artifacts of excavated articles, and real materials. In Japan weaved cloth is called Jomul or Jonue and these methods were brought to Japan from Korea during Aska Period(645${\sim}$710) and Nara Period(710${\sim}$794). Among those knot methods, the 1/1 knot was written as a Shillajo on a documentary record at Heian Period, Engisik, and Samdaesillok which is a historic document from King Saiya to King Gowooko(858${\sim}$887). Also 2/2 knot weaving was recorded as Goryeojo that the technique originated for a long time in Japan. During the Joseon Dynasty, Gunmok was written as Dahoi, and Gwangdahoe, which means wide and flat Gunmok, was the name of Dae(Belt). The frame for the twine Gwangdahoe is no longer in Korea, but only can be found in Japan as a Goraiwoochi loom for Shillajo and Goryeojo from Korea. There are currently artifacts by the techniques of Shillajo and Goryeojo that were excavated in 15${\sim}$17C in Korea. Therefore this study was looked into the artifacts from 6${\sim}$8C in $Sh{\"{O}}so$-in, and the features of Dae (Belt) weaved by Shillajo and Goryeojo case method. Gwangdahoe excavated artifacts in the mid Jeosun Dynasty was restored by the process of Goryeojo weaving method.

• The Korean Journal of Ceramics
• /
• v.4 no.1
• /
• pp.5-8
• /
• 1998

Flat belt(FB) type high pressure apparatus has been succesfully utilized in various high pressure experimental stations in Korea and Japan to conduct HPHT (high pressure and high temperature) diamond synthesis. Present paper discusses pressure calibration of FB apparatus at high temperature to establish P-T condition of diamond synthesis. We also present some examples of controling P-T condition through careful experimental set-up of the high pressure sample cells. Finally we discuss reproducibility of pressure and temperature condition of the HPHT diamond synthesis.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.761-765
• /
• 1996

This paper describes the forging of circular tooth profiled gears as a series of development of simulator for non-axisymmetric parts that being used at the pump pulley, timing belt pulley etc. in automobiles. The half pitch of gear is divided into 6 deformation regious and kinematically admissible velocity fields for those regions are proposed. The neutral surface is introduced torepresent inner flow of material during forging operation with flat punch and, for each step, it is assumed as a circle. The upper bound solutions obtained from the suggested kinematically admissible velocity fields are in good agreement with experimental results and they are useful to predict the capacity of forging press for forging of circular gears.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.15-18
• /
• 1996

In the case of need for reciprocating motion, the study for application of Linear Oscillating Actuator(LOA) is being accomplished. LOA is the simpler and more efficient than other linear apparatus using the rotary motor because LOA produce the thrust force without any converter such as cam, clutch, rack, pinion and belt, etc. We designed the flat moving core type LOA and manufactured for trial. This paper shows the structure and dynamic characteristics of LOA.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.4 no.1
• /
• pp.5-17
• /
• 2002

This study aimed to investigate the relationship between ideal images of women and women's clothing fashion England between 1820s and 1850s. The age was divided into two periods, which were 1820-1836 and 1837-1850. During the first period, the ideal images of women were those of fairy, spirit, and angels, which were expressed by tight waist belt, wider and shorter skirt, top expanded sleeve, wide and flat pelerine collar, feather decoration, elaborate and curly hair style, narrow and light ballerina shoes etc.. During the second period, the ideal images for women were those of lady with modesty, quietness, and weakness. They were expressed by long and full skirt, tight or bulge over the lower arm sleeve, dropped sleeve, poke bonnet, body wrapping large shawl and sober color etc.. The result shows that the ideal images of women in 19th century England were concretely expressed by various clothing fashion including hair style, shoes, and decoration. This study sheds light on psychological, historical, and theoretical approaches to clothing.