• Journal of the Semiconductor & Display Technology
• /
• v.22 no.1
• /
• pp.43-48
• /
• 2023

This paper discusses the design of 32Mbyte asynchronous nonvolatile memory modules, which includes self-diagnosis and RTC (Real Time Clock) functions to enhance their data stability and reliability. Nonvolatile memory modules can maintain data even in a power-off state, thereby improving the stability and reliability of a system or device. However, due to the possibility of data error due to electrical or physical reasons, additional data loss prevention methods are required. To minimize data error in asynchronous nonvolatile memory modules, this paper proposes the use of voltage monitoring circuits, self-diagnosis, BBT (Bad Block Table), ECC (Error Correction Code), CRC (Cyclic Redundancy Check)32, and data check sum, data recording method using RTC. Prototypes have been produced to confirm correct operation and suggest the possibility of commercialization.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.14 no.4
• /
• pp.275-284
• /
• 1985

The thermophysical property values were determined and compared with each other according to the tine of surface treatment. The diffusivity values were obtained by the flash method, and the specific heat values were measured by the differential scanning density. The thermal conductivity values were calculated from the values of the thermal diffusivity, specific heat, and density. The nitrided steels were the structural carbon steels, carbon tool steels, alloy tool steels, and high speed tool steels.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.5
• /
• pp.706-711
• /
• 1986

The AgGa1-xInxSe2 films are deposited by a flash evaporation method onto pyrex glass substrates at temperatures between 5\ulcorner and 360\ulcorner. The single crystalline films which have X-ray diffraction peak of only (112) plane are preared at substrate temperature above 360\ulcorner. The prepared AgGa 1-xInxSe2 films are high photosensitive. The temperature coefficients of energy gap are found to be (-1.2~-4.0)x10**4 eV/K and (-3.1~-5.2)x10**-4 eV/K, and that of peak energy of spectral photoresponse curve are found to be (-1.1 ~ -3.0)x10**-4 eV/K(50K~100K) and (-2.4~-5.1)x10**-4 eV/K(100K~300K).

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.43-46
• /
• 2021

다양한 응용에서 저장 매체로 사용되는 NAND 플래시 메모리는 저비용과 대용량을 위해 셀 당 비트 수 증가, 제조 공정의 미세화, 그리고 적층 기술 등 다양한 기술을 사용한다. 그렇지만 이러한 기술들은 플래시 메모리 셀의 안정성과 성능에 악영향을 준다. 특히 QLC 3D 플래시 메모리인 경우, 셀 상태가 많고 상태 간 임계 전압 간격이 좁기 때문에 프로그램과 읽기에 필요한 시간이 길다. 본 논문에서는 프로그램 수행 시간을 줄이고 셀 안정성에 긍정적인 영향을 줄 수 있도록 데이터 코드를 변환하는 비균일 스크램블 기법을 소개하고, 실제 시스템 데이터를 이용하여 스크램블 기법의 성능을 평가한다. 시뮬레이션을 통해 얻은 결과에 따르면 데이터 코드를 변환하여 저장하는 스크램블 기법은 최대 204%의 프로그램 성능 개선 효과를 보인다.

• Korean Journal of Radiology
• /
• v.1 no.3
• /
• pp.142-151
• /
• 2000

Objective: To determine the optimal scan timing for contrast-enhanced magnetic resonance angiography and to evaluate a new timing method based on the arteriovenous circulation time. Materials and Methods: Eighty-nine contrast-enhanced magnetic resonance angiographic examinations were performed mainly in the extremities. A 1.5T scanner with a 3-D turbo-FLASH sequence was used, and during each study, two consecutive arterial phases and one venous phase were acquired. Scan delay time was calculated from the time-intensity curve by the traditional (n = 48) and/or the new (n = 41) method. This latter was based on arteriovenous circulation time rather than peak arterial enhancement time, as used in the traditional method. The numbers of first-phase images showing a properly enhanced arterial phase were compared between the two methods. Results: Mean scan delay time was 5.4 sec longer with the new method than with the traditional. Properly enhanced first-phase images were found in 65% of cases (31/48) using the traditional timing method, and 95% (39/41) using the new method. When cases in which there was mismatch between the target vessel and the time-intensity curve acquisition site are excluded, erroneous acquisition occurred in seven cases with the traditional method, but in none with the new method. Conclusion: The calculation of scan delay time on the basis of arteriovenous circulation time provides better timing for arterial phase acquisition than the traditional method.

• Journal of Korean Academy of Nursing
• /
• v.34 no.6
• /
• pp.994-1003
• /
• 2004

Purpose: This study was to develop Web-based multimedia content for Physical Examination and Health Assesment. Method: The multimedia content was developed based on Jung's teaching and learning structure plan model, using the following 5 processes: 1) Analysis Stage, 2) Planning Stage, 3) Storyboard Framing and Production Stage, 4) Program Operation Stage, and 5) Final Evaluation Stage. Results: The web based multimedia content consisted of an intro movie, main page and sub pages. On the main page, there were 6 menu bars that consisted of Announcement center, Information of professors, Lecture guide, Cyber lecture, Q&A, and Data centers, and a site map which introduced 15 week lectures. In the operation of web based multimedia content, HTML, JavaScript, Flash, and multimedia technology(Audio and Video) were utilized and the content consisted of text content, interactive content, animation, and audio & video. Consultation with the experts in context, computer engineering, and educational technology was utilized in the development of these processes. Conclusions: Web-based multimedia content is expected to offer individualized and tailored learning opportunities to maximize and facilitate the effectiveness of the teaching and learning process. Therefore, multimedia content should be utilized concurrently with the lecture in the Physical Examination and Health Assesment classes as a vital teaching aid to make up for the weakness of the face-to- face teaching-learning method.

• Journal of information and communication convergence engineering
• /
• v.8 no.1
• /
• pp.51-58
• /
• 2010

This paper proposes an edge adaptive color interpolation for an ultra-small HD-grade complementary metal-oxide semiconductor (CMOS) video sensor in camera phones that can process 720-p/30-fps videos. Recently, proposed methods with great image quality perceptually reconstruct the green component and then estimate the red/blue component using the reconstructed green and neighbor red and blue pixels. However, these methods require the bulky memory line buffers in order to temporally store the reconstructed green components. The edge adaptive color interpolation method uses seven or nine patterns to calculate the six edge directions. At the same time, the threshold values are adaptively adjusted by the sum of the color values of the selected pixels. This method selects the suitable one among the patterns using two flowcharts proposed in this paper, and then interpolates the missing color values. For verification, we calculated the peak-signal-to-noise-ratio (PSNR) in the test images, which were processed by the proposed algorithm, and compared the calculated PSNR of the existing methods. The proposed color interpolation is also fabricated with the 0.18-${\mu}m$ CMOS flash memory process.

• Journal of Korea Foundry Society
• /
• v.3 no.4
• /
• pp.239-247
• /
• 1983

CV graphite cast iron has been studied and generally known to have properties close to the average values of those between flake and spheroidal graphite cast iron. However, the thermal diffusivity of CV graphite cast iron is much larger than that of the average value of those between flake and spheroidal graphite cast iron. In this study, an easy production method of CV graphite cast iron with small additions of a Al-Cu which is known as the element of the graphitization was investigated. The effects of hold time and of Al-Cu additions after the treatments with spheroidizer (Fe-Si-Mg alloy) were also investigated. Increasing the additions of a Al-Cu alloy, the holding time to form a CV graphite cast iron was decreasing. Tensile strength and thermal diffusivity (flash method) were measured in order to find the changes of the mechanical properties and the physical properties. Spheroidal, CV, and flake graphite cast iron have tensile strengths 46.44, 38.29, and $27.29\;kg/mm^2$ and thermal diffusivities $3.95{\times}10^{-6,}$ $8.41{\times}10^{-6}$, $8.81{\times}10^{-6}m^2/sec$, respectively at room temperature.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.8
• /
• pp.3804-3819
• /
• 2018

The increasing popularity of HTTP adaptive video streaming services has dramatically increased bandwidth requirements on operator networks, which attempt to shape their traffic through Deep Packet inspection (DPI). However, Google and certain content providers have started to encrypt their video services. As a result, operators often encounter difficulties in shaping their encrypted video traffic via DPI. This highlights the need for new traffic classification methods for encrypted HTTP adaptive video streaming to enable smart traffic shaping. These new methods will have to effectively estimate the quality representation layer and playout buffer. We present a new machine learning method and show for the first time that video quality representation classification for (YouTube) encrypted HTTP adaptive streaming is possible. The crawler codes and the datasets are provided in [43,44,51]. An extensive empirical evaluation shows that our method is able to independently classify every video segment into one of the quality representation layers with 97% accuracy if the browser is Safari with a Flash Player and 77% accuracy if the browser is Chrome, Explorer, Firefox or Safari with an HTML5 player.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.3
• /
• pp.42-52
• /
• 1995

An UBET(Upper Bound Elemental Techniquel) program has been developed to analyze forging load, die-cavity filling and effective strain distribution for flashless non-axisymmetric forging. To analyze the process easily, it is suggested that the deforma- tion is divided into two different parts. Those are axisymmetric part in corner and plane- strain part in lateral. The total power consumption is minimized through combination of two deformation parts by building block method, form which the upper-bound forging load, the flow pattern, the grid pattern, the velocity distribution and the effective strain are deter- mined. To show the merit of flashless forging, the results of flashless and flash-forging processes are compared through theory and experiment. Experiments have been carried out with plasticine billets at room temperature. The theoretical predictions of the forging load and the flow pattern are in good agrement with the experimental results.