• 대한조선학회지
• /
• 제27권3호
• /
• pp.56-72
• /
• 1990

본 논문에서는 유체동력학적면에서 선수 플레어 충격에 대하여 고찰하고, 특히 전형적인 플레어 충격하중 계산에서 사용된 가정에 대하여 검토한다. 압력이 작용하지 않는 자유표면 경계조건에 의한 계산결과들이 제시된다. 이 단순화된 경계조건을 사용하면 물이 제트처럼 올라오는 현상이나 평균자유표면 위의 젖은 부분과 같은 중요한 인자를 무시하게 되지만, 계산할 때는 아주 단순하다는 장점을 갖는다. 3차원 계산결과와 2차원 계산 결과를 실험과 비교하였으며, 근사 자유 표면 조건으로부터 발생하는 오차를 검토 하였다. 또, 2차원 및 3차원 해석에서 연직 굽힘 모멘트와 연직 전단력도 포함되었다.

• 대한조선학회지
• /
• 제24권1호
• /
• pp.51-66
• /
• 1987

In this paper, the authors investigate theoretically the motion and longitudinal strength of ships among waves talking account of the effects of nonlinearities such as the hull shape, bottom emergence, and hydrodynamic impact. Incidentally the ship is treated as an elastic beam in heading wave condition regarding characteristics of slamming and whipping-according to the variation in the range of a quarter length of the ship forward and the increase of the elastic modes up to 4-th vibration mode were investigated by the present theory. Calculations are performed for 97m container ship and its validity is confirmed by a series of model tests. Conclusions obtained are as follows; 1) Acceleration and pressure estimated by the present theory are in good accordance with experiments. 2) The present non-linear theory may be applied for estimating longitudinal bending moment of ships in slamming and whipping conditions. 3) In investigation of the characteristic in response according to shape variation for parts under draft and vow-flare in the range of a quarter length of the ship forward, dynamic responses due to the former were much more conspicuous than those due to the later. 4) In the maximum bending moment, the considering case up to 2-the mode are larger, about $10{\sim}15%$, than that up to 4-th mode.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.983-999
• /
• 2014

The structural design of the ships includes two main issues which should be checked carefully, namely the extreme structural response (yielding & buckling) and the fatigue structural response. Even if the corresponding failure modes are fundamentally different, the overall methodologies for their evaluation have many common points. Both issues require application of two main steps: deterministic calculations of hydro-structure interactions for given operating conditions on one side and the statistical post-processing in order to take into account the lifetime operational profile, on the other side. In the case of ultra large ships such as the container ships and in addition to the classical quasi-static type of structural responses the hydroelastic structural response becomes important. This is due to several reasons among which the following are the most important: the increase of the flexibility due to their large dimensions (Lpp close to 400 m) which leads to the lower structural natural frequencies, very large operational speed (> 20 knots) and large bow flare (increased slamming loads). The correct modeling of the hydroelastic ship structural response, and its inclusion into the overall design procedure, is significantly more complex than the evaluation of the quasi static structural response. The present paper gives an overview of the different tools and methods which are used in nowadays practice.

• Selected Papers of The Society of Naval Architects of Korea
• /
• 제2권1호
• /
• pp.79-105
• /
• 1994

A ship in waves is suffered from the various wave loads that comes from its motion throughout its life. Because these loads are dynamic, the analysis of a ship structure must be considered as the dynamic problem precisely. In the rationally-based design, the dynamic structural analysis is carried out using dynamic wave loads provided from the results of the ship motion calculation as a rigid body. This method is based on the linear theory assumed low wave height and small amplitude of motion. But at the rough sea condition, high wave height, compared with ship's depth, induce the large ship motion, so the ship section configuration under waterline is rapidly changed at each time. This results in a non-linear problem. Considering above situation in this paper, a strength analysis method is introduced for the hull girder among waves considering non-linear hydrodynamic forces. This paper evaluates the overall or primary level of the ship structural dynamic loading and dynamic response provided from the non-linear wave forces, and bottom flare impact forces by momentum slamming theory. For numerical calculation a ship is idealized as a hollow thin-walled box beam using thin walled beam theory and the finite element method is used. This method applied to a 40,000 ton double hull tanker and attention is paid to the influence of the response of the ship's speed, wave length and wave height compared with the linear strip theory.

• 대한조선학회논문집
• /
• 제29권4호
• /
• pp.152-172
• /
• 1992

대파고 파랑중을 항해하는 선박은 큰 선체 운동으로 인하여 수면하 단면 형상이 시시각각 크게 변하므로 자유 표면 조건, 물체 표면 조건의 비선형성에 의한 비선형 유체력의 영향이 무시될 수 없게 된다. 경우에 따라서는 선저가 파면으로부터 충격력을 받는 슬래밍 현상과 선수가 파도를 뒤집어 쓰는 청파 현상등과 같은 충격적 유체력이 선체에 가해지는 등 복잡한 문제가 발생하게 된다. 본 연구에서는 선체를 가변 단면보의 탄성체로 이상화하여 파랑중 선체 거동을 박육 단면보 이론에 의해 정식화하고 파랑 하중으로는 수면하 단면 형상 변화에 따른 비선형 유체력과 momentum slamming이론을 이용한 유체 충격력을 고려하여 대파고 파랑 중 탄성체인 선체의 응답을 추정하는 해석 기법을 개발하여 이를 기존의 실험결과와 비교 그 타당성을 확인하고, 이의 응용으로 본 기법에 의하여 4만톤급 정유 운반선에 적용하여 정면파 및 사파중에서 파고, 파장, 선속을 파라미터로 한 수치 계산을 수행하고 여러가지 파라미터 변화에 대한 선체 구조의 동적 강도 응답 특성을 계통적으로 분석하여 보았다. 본 연구에서 개발된 동적강도 해석법은 대파고 중에서 유체력의 비선형성 및 유체 충격력까지 고려한 해석기법이므로 신구조 방식 선박에 대한 직접 설계법의 확립 뿐만 아니라 슬래밍 등에 의한 선체 절손 사고의 원인 규명에도 유용하게 적용할 수 있을 것으로 사료된다.