• 한국전기전자재료학회논문지
• /
• 제20권2호
• /
• pp.142-151
• /
• 2007

Non-halogen flame retardant have been focus of extensive research because of environmental problem. Hexakisphenokycyclotriphosphazene was synthesized in order to use as the flame retardant of ABS resin. And using bisphenol A, bisphenol S, and resorcinol, the polymers which contained cyclophosphazene structure were synthesized in order to also use as the flame retardants of ABS resin. All of the synthesized polymers themselves got the excellent flame retardancy. And as the molecular weight of the compound were increased, the thermal stability was increased. But when the synthesized compounds were used as the flame retardants for ABS resin, the lower molecular weight compound in these compounds showed the better flame retardancy and the better physical properties of ABS resin. In case of using resorcinol, it showed the best flame retardancy.

• 한국응용과학기술학회지
• /
• 제24권2호
• /
• pp.124-139
• /
• 2007

In order to obtain the maximum flame retardancy with the minimal deterioration of physical properties of PU flame-retardant coatings, chlorine and phosphorous functional groups were introduced into the pre-polymer of modified polyesters. In the first step, the tetramethylene bis(orthophosphate) (TBOP) and neohexanediol dichloroacetate (DCA-adduct) intermediates were synthesized. In the second step, 1,4-butanediol and adipic acid monomers were polymerized with the two kind of intermediates to obtain copolymer. The modified polyesters containing chlorine and phosphorous (ATBA-10C, -20C, and -30C) were synthesized by adjusting the contents of chlorine compound (dichloroacetic acid, 10, 20, 30 wt%) with fixed the content of phosphorous compound (2 wt%). The PU flame-retardant coatings (TTBAH -10C, -20C, and -30C) were prepared using the synthesized ATBAs and HDI-trimer as curing agent at room temperature. The physical properties of PU flame-retardant coatings with chlorine and phosphorous were inferior to those with phosphorous only and the properties were getting worse with increasing chlorine content. Flame retardancy was tested with three methods. With the vertical method, Complete combustion time of ATBAHs were $259^{\sim}347$ seconds, which means that the prepared coatings are good flame-retardant. With the $45^{\circ}$ Meckel burner method, char lengths of the three prepared coatings were less than 2.9 cm, which indicates that the prepared coatings are 1st grade flame retardancy. With the limiting oxygen index (LOI) method, the LOI values of the three prepared coatings were in the range of $30^{\sim}35%$, which proves good flame retardancy of the prepared coatings. From the results of flame retardancy tests of the specimens that contain the same amounts of flame retarding compounds, it was found that the coatings containing both phosphorous and chlorine show higher flame retardancy than the coatings containing phosphorous alone. This indicates that some synergy effect of flame retardancy exists between phosphorous and chlorine.

• 폴리머
• /
• 제26권2호
• /
• pp.200-208
• /
• 2002

난연성분인 트리클로로벤조산(TBA)의 함량을 10, 20, 30 wt%로 변화시키면서 아디프산, 1,4-부탄디올 및 트리메틸올프로판과 축중합을 하여 트리클로로 락톤 변성폴리에스테르(TAPTs)를 합성한 후에, TAPT류와 이소시아네이트인 Desmodur IL을 블렌드하여 2성분계 폴리우레탄 난연 도료를 제조하였다. 제조된 난연도료의 도막물성을 측정한 결과, 결코 비난연도료보다 물성이 떨어지지 않음을 알았다. 또한 난연도료의 3종류 난연성 시험결과, 수직법에서 TBA 함량 20 wt% 이상에서 불꽃에 타지 않았고, LOI 연소성 시험에서 TBA 함량 20, 30 wt%시 25%와 27%의 LOI값을 나타내었으며, $45^{\circ}$ Meckel burner법에서는 탄화길이가 3.6-5.2 cm로서 난연 1급에 해당되었으므로 이를 미루어 난연효과가 좋은 난연도료임을 알 수 있었다.

• 폴리머
• /
• 제26권2호
• /
• pp.193-199
• /
• 2002

전보에서 합성한 디클로로-폴리에스테르 폴리올(DCBAO)에 2종류의 이소시아네이트 경화제인 Desmodur N-3300과 Desmodur L-75를 선택하여 상온경화시켜 PU계 난연도료 (DCBAO/N-3300=DCBAN 및 DCBAO/L-75=DCBAL)를 각각 제조하였다. 제조된 DCBA과 DCBAL 도료로서 도막물성을 측정한 결과, 양쪽 모두의 도료가 난연처리 후에도 물성저하 현상을 초래하지 않았으며, 별도의 황변성 시험에서 황변성은 DCBAL 쪽이 다소 불량하게 나타나 Desmodur L-75가 황변성과 관련이 있음을 알았다. 또한 난연성분인 2,4-dichlorobenzoic acid의 함량 20∼30 wt%에서 LOI 값 25∼26% 선의 난연효과를 보여주었다.

• 한국의류학회지
• /
• 제38권3호
• /
• pp.404-414
• /
• 2014

This study investigates the dyeability and fastness of jacquard fabric for blind using low-melting flame retardant polyester. Two types of jacquard fabric were prepared with a low-melting flame retardant polyester and regular polyester. The low-melting flame retardant polyester has a sheath and a core. The core consists of flame retardant polyester and the sheath consists of low-melting polyester. Disperse red 50 (DR 50), disperse blue 56 (DB 56), disperse yellow (DY 54) of E-type dyes and disperse 92 (DR 92), disperse blue 60 (DB 60), disperse yellow (DY 79) of S-type dyes were used and dyed on jacquard fabrics dependent of dyeing temperature and time. The fastness, dye exhaustion, color strength (K/S value), and colorimetric properties of jacquard fabrics were evaluated. The dyeability of S-type dyes were higher than E-type dyes. The experiments indicated optimum dyeability that the dyeing temperature was $110^{\circ}C$ for E-type dyes and $120^{\circ}C$ for S-type dyes for 40 minutes. The fastness to washing and light were excellent at a 4-5 grade.

• 한국안전학회지
• /
• 제5권3호
• /
• pp.63-68
• /
• 1990

The effects of various brominated flame retardants were investigated in PC/ABS blend system. The compatibilities between polymers and flame retardants were expected with the solubility parameter using group contribution theory. Tetrabromobisphenol A carbonate oligomer, among the flame retardants in this experiment, has been shown good miscibility for PC and ABS, respectively. But polydibromophenylene oxide and octabromodiphenyl oxide has immiscibility. The flame retardant PC/ABS blends containning tetrabromobisphenol A carbonate oligomer have been exhibited higher mechanical properties, tensile strengths and notch Izod impact strengths, at varlous content of flame retardants, than containning other flame retardants. It could be seen that the trends of mechanical properties for the flame retardant PC/ABS blends have a good concidence with the expectation of compatibility.

• 한국안전학회지
• /
• 제21권1호
• /
• pp.65-71
• /
• 2006

Flame retardancy and mechanical properties of polyolefinic mixed waste plastics/filler composites were investigated by using inorganic flame retardant(magnesium hydroxide) and PUB(polyurethane block) powder generated from cryogenic insulation process. All composites were obtained by extrusion and after compression molding. The effect of PUB powder on the properties of the composites was studied by tensile and izod impact test, morphology studies and flammability as LOI and UL94 vertical burning test and smoke density. The objective of this work is to obtain good mechanical properties from recycled PP composites with $Mg(OH)_{2}/PUB$ powder as fillers and optimum cost-performance balance, in addition to flame retardant characteristics.

• 공업화학
• /
• 제17권2호
• /
• pp.144-149
• /
• 2006

환경적인 문제로 인하여 할로겐 원소를 갖지 않는 난연제에 대한 연구가 매우 활발하다. 본 연구에서는 hexakisp-henoxycyclotriphosphazene을 합성하였으며, 이것을 ABS 수지의 난연제로 사용하여 보았다. 그리고 bisphenol A를 이용하여 cyclotriphosphazene구조를 갖는 분자량이 큰 화합물들을 합성하여 이들을 역시 ABC 수지의 난연제로 사용하여 보았다. 합성한 고분자들 자신은 매우 우수한 난연성을 보여주었으며 분자량이 커지고 가교구조가 많아질수록 열적 안정성은 더 높아졌다. 그러나 이러한 화합물들을 ABS 수지의 난연제로 사용하였을 때 이들 화합물들 중에서 비교적 분자량이 낮은 화합물이 ABS 수지에 더 우수한 난연성을 나타내게 하였으며 ABS 수지의 물리적인 성질도 더 우수하게 하였다.

• 한국응용과학기술학회지
• /
• 제24권1호
• /
• pp.31-46
• /
• 2007

This study was focused on the maximization of flame-retardancy of polyesters by a synergism of simultaneously introduced chlorine and phosphorus into polymer chains of modified polyesters. To prepare modified polyesters, reaction intermediates, TD-adduct (prepared from trimethylolpropane/2,4-dichlorobenzoic acid (2,4-DCBA)) and TMBO (prepared from tetramethylene bis(orthophosphate)), were prepared first, then condensation polymerization of the prepared intermediates, adipic acid, and 1,4-butanediol were carried out. In the condensation polymerization, the content of phosphorus was fixed to be 2%, and the content of 2,4-DCBA that provides chlorine component was varied to be 10, 20, and 30wt%, and we designated the prepared modified polyesters containing chlorine and phosphorus as ABTT-10C, -20C, -30C. Two-component PU flame-retardant coatings (ABTTC, ABTTC-10C, ABTTC-20C, ABTTC-30C) were prepared by the curing of synthesized ABTTs with a curing agent of allophanate/trimer at room temperature. To examine the film properties of the prepared PU flame-retardant coatings, film specimens were prepared with the prepared coatings. The film properties of ABTTC, ABTTC-10C and ABTTC-20C, which contain 0, 10 and 20wt% 2,4-DCBA, respectively, were proved to be good, whereas the film properties of ABTTC-30C, which contains 30wt% 2,4-DCBA, was proved to be a little bit poor. Two kinds of flame retardancy tests, $^{\circ}45Meckel$ burner method and LOI method were performed. With the $^{\circ}45Meckel$ burner method, three flame-retardant coatings except ABTTC showed less than 3.4cm of char length, and showed less than 2 seconds of afterflaming and afterglow. From this result, the prepared flame-retardant coatings were proved to have the 1st grade flame retardancy. With the LOI method, the LOI values of the coatings containing more than 10wt% 2,4-DCBA were higher than 30%, which means that the coatings possess good flame retardancy. From these results, it was found that synergistic effect in flame retardancy was taken place by the introduced phosphorus and chlorine.

• 한국화재소방학회논문지
• /
• 제31권3호
• /
• pp.11-18
• /
• 2017

본 연구에서는 건축물 내에 사용되는 실내장식물의 가연성으로 인해 화재 시 발생하는 연기로 인한 인명피해를 사전에 예방하기 위해 무기물의 실리케이트와 유기물의 실란커플링제를 졸-겔법으로 합성하여 방염성을 부여할 수 있는 비할로겐 방식의 유-무기 하이브리드 방염제졸을 새롭게 제조하였다. 제조된 방염제졸의 성능확인을 위해 방염성능기준에 의거한 연기밀도 측정기준인 ASTM E 662의 시험장치 및 절차에 따라 훈소모드 실험 및 불꽃모드 실험을 진행하여 성능을 확인하였다. 결과적으로 제조된 방염제졸은 기존의 방염제의 물성과 내열성능을 높여 화재 시 연기발생량을 감소시킬 수 있기 때문에 향후 다양한 실내장식물에서도 확대적용 함으로써 연기에 의한 피해에 있어 긍정적인 효과를 발휘할 것으로 생각된다.