• 한국전기전자재료학회논문지
• /
• 제30권8호
• /
• pp.508-513
• /
• 2017

Ultraviolet (UV) photodetectors are used in various industries and fields of research, including optical communication, flame sensing, missile plume detection, astronomical studies, biological sensors, and environmental research. However, general UV detectors that employ Schottky junction diodes and p-n junctions have high fabrication cost and low quantum efficiency. In this study, we investigated the characteristics of materials used to manufacture UV photodetectors in a low-cost solution process that requires easy fabrication of flexible substrates. We fabricated p-type NiO and n-type ZnO substrates with wide band gap by the sol-gel method and compared the characteristics of substrates prepared under different spin-coating and heat-treatment conditions.

• Bulletin of the Korean Chemical Society
• /
• 제14권2호
• /
• pp.234-238
• /
• 1993

The method of study describes the determination of the nanogram amounts of mono-, di-, and tri-butyltin compounds in sea water. The procedure is based on 1) the conversion of tin compounds to non-ionic species by sodium tetraethyl borate as an alkylation reagent, 2) one-step ethylation and 3) extraction. No further purification or concentration of the extract was required before GC-FPD (Flame Photometric Detector). The detection limits for mono-, di- and tri-butyltin were 12.50, 6.02, and 4.19 ng/L. The linear range (0-120 ng/L) was solely dependent on the detector response height. Sea water samples (n=24) were obtained from Masan Bay, Busan, Ullsan, Gunsan, Sockcho, Yeasu, Donghae, Inchun, Kanghwa, and Ahsan in Korea. The samples were collected between June, 1992 to July, 1992 and the distribution of monobutyltintrichloride (MBTC), dibutyltindichloride (DBTC), and tributyltinchloride (TBTC) in sea water was recorded. The concentrations of butyltin compounds in seawater were found to be in the range of N.D. (not detected)-61.93 ng/L for MBTC, N.D.-32.16 ng/L for DBTC, and N.D.-55.76 ng/L for TBTC.

• 분석과학
• /
• 제20권1호
• /
• pp.55-60
• /
• 2007

A sensitive technique for the determination of trace Cu(II) in various samples after the column preconcentration by adsorbing its N-benzoylphenylhydroxylamine (BPHA) onto benzophenone was developed. Several experimental conditions such as the pH of the sample solution, the amount of chelating agent, the amount of benzophenone, and the flowrate of sample solution and so forth were optimized. The interfering effects of diverse concomitant ions were investigated. Fe(III) and $CN^-$ interfered with more seriously than any other ions. However, the interference by these ions could be overcome sufficiently by adjusting the added volume of 0.01M BPHA to 10 mL. The dynamic range, the correlation coefficient ($r^2$) and the detection limit obtained by this proposed technique were 5.0~120 ng/mL, 0.9974, and 2.1 ng/mL, respectively. For validating this proposed technique, the aqueous samples (stream water, reservoir water, and wastewater), the plastic sample and the diluted brass sample were used. Recovery yields of 93~102% were obtained. These measured data were not different from ICP-MS data at 95% confidence level. This method was also validated by the rice flour CRM (normal, fortified) samples. Based on the results from the experiment, it was found that this proposed technique could be applied to the determination of Cu(II) in various real samples.

• 분석과학
• /
• 제31권1호
• /
• pp.23-30
• /
• 2018

어린이 제품 중 22 종의 알러지 유발 방향성 물질들을 기체 크로마토그래피 불꽃 이온화 검출기(GC-FID)와 기체 크로마토그래피 질량 분석기(GC-MSD)를 사용하여 분석하였다. 분석물질들은 자동속슬렛 추출장치를 사용하여 추출하였으며, 고속 냉동 원심분리기에서 10분동안 원심분리 후 상징액을 2 mL vial 옮겨 Split mode로 주입하여 분석하였다. 확립된 조건에서 검정곡선은 0.996 이상의 상관계수를 갖는 직선성을 보였으며, 감도의 경우는 6.7~1,859,839로서 물질별로 기기특성 및 검출기에 따라 상당히 넓은 범위의 감도를 나타내었다. 기기검출한계는 $0.0032{\sim}0.0335{\mu}g/mL$로서 최대 약 $0.1{\mu}g/mL$이하의 기기검출한계를 나타내었고, 방법검출한계는 $0.0033{\sim}0.1161{\mu}g/mL$의 범위를 나타내었다. 또한 정량한계는 $0.0100{\sim}0.5422{\mu}g/mL$의 범위를 보였고, 정밀도는 0.21~4.89 %, 정확도는 89~111%의 범위를 나타내었다. 본 연구에서 개발한 분석법으로 시판품에 실제 적용하였다.

• 한국식품위생안전성학회지
• /
• 제36권1호
• /
• pp.34-41
• /
• 2021

본 연구는 조제유류 중 지방산에 대해 최신 분석법을 마련하고자 수행하였다. 조제유류 중 지방산 함량 분석을 위해 GC를 이용한 분석법을 확립하고 시중에 유통 중인 제품을 대상으로 적용성을 검토하였다. 분석법 검증은 특이성, 직선성, 검출한계 및 정량한계, 정확성, 정밀성에 대해 수행되었다. Linoleic acid 및 α-linolenic acid의 0.1-5 mg/mL 농도범위에서 R2=0.999 이상의 우수한 직선성을 확인할 수 있었다. Linoleic acid 및 α-linolenic acid의 LOD는 각각 0.06 mg/mL, 0.01 mg/mL, LOQ는 각각 0.16 mg/mL, 0.03 mg/mL였다. 표준인증물질 분석을 통해 정확성을 검토하였으며, linoleic acid 및 α-linolenic acid의 회수율은 각각 100.8%와 101.1%로 확인하였다. 정밀성을 검토한 결과 시료 채취량에 따른 반복성은 linoleic acid 1.4-2.9%, α-linolenic acid 1.1-2.7%이었고, 실험실간 재현성은 각각 2.8%, 1.5%임을 확인하였다. 본 연구에서 확립된 분석법을 적용하여 국내 유통 중인 조제유류 및 조제식 제품 12건에 대해 적용성 검토를 실시한 결과 전체 시료에서 분석이 용이하였으며, 모두 기준·규격에 적합함을 확인하였다. 본 결과로부터 확립된 GC를 이용한 분석법은 조제유류 중 지방산 함량을 확인하기에 적합함을 확인하였으며 국내 식품 영양성분의 관리 기반을 강화하는데 기여할 것으로 사료된다.

• 분석과학
• /
• 제14권2호
• /
• pp.180-190
• /
• 2001

화합물에 포함된 냄새를 유발하는 물질은 다양한 성분으로 되어 있다. 냄새를 유발하는 휘발성 화합물의 분석에는 GC 또는 GC/MSD 등이 많이 사용된다. 그러나, 이들 분석기기는 전체 휘발성 성분의 profile이나 특정성분의 함량을 정량적으로 분석할 수는 있으나, 냄새를 유발하는 지배적인 성분이 무엇인지 파악하기가 어렵다. 이러한 문제점을 해결하기 위해 사용되는 방법에는 GC-Sniffing 또는 GC-Olfactometry법 등이 있다. 본 연구에서는 복합적인 냄새성분을 검출하기 위해 사람의 후각을 이용하는 olfactometry를 기존 GC에 결합시켜 분리컬럼에서 분리된 시료가 동시에 검출되는 GC/FID/Olfactometry를 개발하였다. FID와 ODP 신호간의 시간차이는 물질의 종류와 농도, 그리고 패널에 따라 다르게 나타났다. 일반적으로 휘발성과 냄새강도는 큰 물질일수록, 패널의 호흡주기가 짧을수록 두 신호간의 시간차이가 적었다. 그러므로, 정확한 냄새 원인물질의 규명에는 이들 신호의 관계에 대한 고찰이 필요하다.

• 분석과학
• /
• 제30권4호
• /
• pp.174-181
• /
• 2017

Bio-liquid is a liquid by-product of the hydrothermal carbonization (HTC) reaction, converting wet biomass into solid hydrochar, bio-liquid, and bio-gas. Since bio-liquid contains various compounds, it requires efficient sampling method to extract the target compounds from bio-liquid. In this research, fatty acid methyl ester (FAME) in bio-liquid was extracted based on hollow fiber supported liquid phase microextraction (HF-LPME) and determined by Gas Chromatography-Flame Ionization Detector (GC-FID) and Gas Chromatography/Mass Spectrometry (GC/MS). The well-known major components of biodiesel, including methyl myristate, palmitate, methyl palmitoleate, methyl stearate, methyl oleate, and methyl linoleate had been selected as standard materials for FAME analysis using HF-LPME. Physicochemical properties of bio-liquid was measured that the acidity was 3.30 (${\pm}0.01$) and the moisture content was 100.84 (${\pm}3.02$)%. The optimization of HF-LPME method had been investigated by varying the experimental parameters such as extraction solvent, extraction time, stirring speed, and the length of HF at the fixed concentration of NaCl salt. As a result, optimal conditions of HF-LPME for FAMEs were; n-octanol for extraction solvent, 30 min for extraction time, 1200 rpm for stirring speed, 20 mm for the HF length, and 0.5 w/v% for the concentration of NaCl. Validation of HF-LPME was performed with limit of detection (LOD), limit of quantitation (LOQ), dynamic range, reproducibility, and recovery. The results obtained from this study indicated that HF-LPME was suitable for the preconcentration method and the quantitative analysis to characterize FAMEs in bio-liquid generated from food waste via HTC reaction.

• Journal of Microbiology and Biotechnology
• /
• 제19권12호
• /
• pp.1672-1678
• /
• 2009

We studied the effects of aged total petroleum hydrocarbons (aged TPH) on the survival of allochthonous diesel-degrading Rhodococcus sp. strain YS-7 in both laboratory and field investigations. The aged TPH extracted from a crude-oil-contaminated site were fractionized by thin-layer chromatography/flame ionization detection (TLC/FID). The three fractions identified were saturated aliphatic (SA), aromatic hydrocarbon (AH), and asphaltene-resin (AR). The ratio and composition of the separated fractions in the aged TPH were quite different from the crude-oil fractions. In the aged TPH, the SA and AH fractions were reduced and the AR fraction was dramatically increased compared with crude oil. The SA and AH fractions (2 mg/l each) of the aged TPH inhibited the growth of strain YS-7. Unexpectedly, the AR fraction had no effect on the survival of strain YS-7. However, crude oil (1,000 mg/l) did not inhibit the growth of strain YS-7. When strain YS-7 was inoculated into an aged crude-oil-contaminated field and its presence was monitored by fluorescent in situ hybridization (FISH), we discovered that it had disappeared on 36 days after the inoculation. For the first time, this study has demonstrated that the SA and AH fractions in aged TPH are more toxic to an allochthonous diesel-degrading strain than the AR fraction.

• 대한기계학회논문집B
• /
• 제26권11호
• /
• pp.1531-1541
• /
• 2002

The NOx emission characteristics of C$H_4$-Air coflow jet flames were numerically and experimentally investigated. NOx was measured using a chemiluminescent detection and calculated by the parabolic -type equation solver with a detatiled NOx chemistry. The fuel flow rate( $Q_{F}$), the diameter of mixture nozzle and the equivalence rate(Ф) were varied to discuss the EINOx of each flames at the various combustion conditions. The NOx emission index(EINOx) was introduced to quantify the NOx emission from the parametrically varied flames. The results show that Prompt EINOx increases on a logarithmic profile with increasing ${\Phi}$ and keeps nearly constant for the variation of $Q_{F}$. Thermal EINOx reaches the maximum value at around ${\Phi}$ =1.5 and then slowly decrease for ${\Phi}$ >1.5. In addition, Thermal EINOx increases with increasing $Q_{F}$, but nearly indifferent to the variation of the mixture nozzle diameter. Total EINOx also shows a peak at around ${\Phi}$ =1.5, followed by a relatively sharp decrease for 1.5< ${\Phi}$ <2.5 and increase slowly for 2.5 < ${\Phi}$ < $\infty$ The present Total EINOx trend is well explained by a combination of above Thermal and Prompt EINOx trend with the variation of ${\Phi}$ n of ${\Phi}$.

• Journal of Preventive Medicine and Public Health
• /
• 제7권2호
• /
• pp.377-381
• /
• 1974

Determination of lead in urine is important in industrial hygiene and toxicology. Dithizone method has been principally used for the determination of lead in urine, which gives accurate results in skilful hands but is usually complex and time-consuming. Atomic absorption spectrophotometry is a new simple method and several procedures have been described. However, the influences of pH and the presence of chelating agents during treatment of lead poisoning are not clear. The purpose of this study was to find out the effect of pH and chelating agents on the determination of lead using Shimadzu atomic absorption/flame spectrophotometer, model AA-610. The results obtained were as follows: 1. The atomic absorption spectrophotometry(AAS) could be applied without prior acid digestion to specimens in the absence of chelating agents. The absorbance at $2,170\;{\AA}$, though more sensitive, was more noisy electronically. Therefore, we selected the wavelength of $2,833\;{\AA}$ plus scale expansion. 2. The optimal pH was in the range from 2 to 3. 3. The sensitivity was $0.075{\mu}g/ml/%$ and detection limit was about $0.2{\mu}g/ml$. 4. In the presence of EDTA, lead could not be completely determined without prior acid digestion. 5. On specimens from patients receiving penicillamine therapy, a comparison was made between the values obtained with dithizone method and AAS method with prior acid digestion. The results of comparison showed a very good agreement.