• 한국연소학회지
• /
• 제13권1호
• /
• pp.23-30
• /
• 2008

An analytical expression for the turbulent burning velocity is derived from the asymptotic zone conditional transport equation at the leading edge. It is given as a sum of laminar and turbulent contributions, the latter of which is given as a product of turbulent diffusivity in unburned gas and inverse scale of wrinkling at the leading edge. It was previously shown that the inverse scale is equal to four times the maximum flame surface density in the wrinkled flamelet regime [1]. The linear behavior between $U_T$ and u' shows deviation with the inverse scale decreasing due to the effect of a finite flamelet thickness at higher turbulent intensities. DNS results show that $U_T/S^0_{Lu}$ may be given as a function of two dimensionless parameters, $u'/S^0_{Lu}$ and $l_t/\delta_F$, which may be transformed into another relationship in terms of $u'/S^0_{Lu}$, and Ka. A larger $l_t/{\delta}_F$ or a smaller Ka leads to a smaller scale of wrinkling, hence a larger turbulent burning velocity in the limited range of $u'/S^0_{Lu}$. Good agreement is achieved between the analytical expression and the turbulent burning velocities from DNS in both wrinkled and thickened-wrinkled flame regimes.

• 한국수소및신에너지학회논문집
• /
• 제31권5호
• /
• pp.467-479
• /
• 2020

Various researches are being conducted to reduce greenhouse gases generated by the consumption of traditional energy resources. This study was conducted to numerically analyze the combustion characteristics and N-S reaction behavior with respect to the H₂ content of syngas composed of CO and H₂ in pressurized air combustion. A non-premixed opposed flow flame model was applied a modified detailed mechanism with S-chemistry was developed based on GRI 3.0 to simulate the syngas reaction. As the hydrogen content increased, the flame thickness increased due to the fast reactivity of hydrogen. In the rich region, NO and SO₂ were reduced by reaction with H radical and H bonding of NO was suppressed by the formation of HOSO.

• Archives of Reconstructive Microsurgery
• /
• 제14권2호
• /
• pp.144-151
• /
• 2005

Purpose: Disaster as traffic accident, industrial disaster, high voltage electrical bum and flame burn of extremity have a destructive effect because of the involvement of deep structure. Generally, such injury may result in decreased function or loss of limb. In this study the successful use of the combined scapular/parascapular flap as microsurgical transfer to cover extensive defect of electrical and flame bum is reported. Material and Method: Between January 2000 and June 2001, the combined scapular and parascapular flap was used for the coverage of soft tissue defect for 7 patients were admitted to our department with high voltage electrical bum and flame burn. The recipient site were the wrist joint in 2 cases, the forearm in 1 case, the ankle joint in 1 case, the foot dorsum in 1 case, the heel in 1 case. Result: Flap survival was complete in all patients. The result of flap coverage for these deep wound was successful. Conclusion: The advantages of scapular/parascapular combined flap were coverage of the large defect, easy shaping of the flap to fit the required three dimensional configuration around the joint, non hair bearing skin of uniform thickness, minimal donor site morbidity.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1652-1656
• /
• 2022

Fire tests were conducted on cables using fire-retardant paint employed in nuclear power plants that transmit electrical power, control and instrument signals. The failure criteria of various power and control cables coated with fire retardant coating at three different coating thicknesses (~0.5 mm, 1.0 mm & 1.5 mm) were studied under direct flame test using Container Fire Test Facility (CFTF) based on standard tests for bare cables. A direct flame fire test was conducted for 10 min with an LPG ribbon burner rated at ten by fixing the cable samples in a vertical cable track. Inner sheath temperature was measured until ambient conditions were achieved by natural convection. The cables are visually evaluated for damage and the mass loss percentage. Cable functionality is ascertained by checking for electrical continuity for each sample. The thickness of cable coating on fire exposure is also studied by comparing the transient variation of inner sheath temperature along the Cable length. This study also evaluated the adequacy of fire-retardant coating on cables used for safety-critical equipment in nuclear power plants.

• 한국산학기술학회논문지
• /
• 제11권2호
• /
• pp.608-613
• /
• 2010

본 연구는 건축용 바닥재로 널리 이용되는 PVC 상재의 표면을 열에 의한 손상으로부터 보호하기 위하여 기존에 사용하는 광경화형 우레탄-아크릴 수지에 내열성(anti-cigar burning)을 향상시킨 광경화형 수성도료 개발에 관한 것이다. PVC 바닥상재용으로 사용되는 내열기능성이 없는 우레탄-아크릴 수지에 인계화합물을 주원료로 합성한 내열재, 구아니딘을 주원료로 합성한 내열재, 일시적 방염제로 사용되는 제 2인산암모늄을 수지의 양 대비 함량(wt%)을 10, 20, 30%로 변화하여 첨가한 후 배합하여 수지의 내열성을 향상시킨 코팅액을 제조하였다. 제조한 코팅액은 코팅층의 두께조절이 가능한 Bar-coating을 사용하여 PVC 바닥상재에 코팅한 후, 내열성, 부착력, 내화학성, 코팅두께 등의 코팅층 표면물성을 평가하였다. 연구결과, 수지에 인계화합물을 주원료로 합성한 내열재 30%를 혼합하여 제조한 코팅액을 Bar-coater No.12로 코팅한 코팅표면이 열에 의한 손상이 가장 적고, 부착력 100%, 내화학성 양호로 가장 좋은 물성을 보였다. 전반적으로 내열재 함량이 높고, 코팅 두께가 두꺼울수록 내열성이 우수한 것으로 나타났다.

• 한국화재소방학회논문지
• /
• 제28권2호
• /
• pp.34-39
• /
• 2014

건축물의 성능위주 소방설계의 활용성 및 신뢰성을 향상시키기 위해서는 다양한 화재실험 및 조사 등을 통해 가연물의 연소물성에 관한 광범위하고 다양한 데이터베이스가 필요하다. 본 연구에서는 건축물의 성능위주 소방설계에 활용하기 위해 건축물의 내장용 판재 2종과 내장용 루버 3종을 대상으로 연소시험을 실행하여 연소발열특성 등을 파악하였다. 또한 내장용 판재는 그 두께에 따라 최대열방출률 등 연소발열성상에 차이가 발생할 가능성이 있으므로 판재의 두께에 따라 연소시험을 수행하였다. 실험결과 내장재 판재 및 루버의 단위연소량당 평균발열량은 15.3MJ/kg~16.9MJ/kg이었고, 내장용 판재의 평균최대열방출률과 평균최대이산화탄소 농도는 판재의 두께에 따라 차이가 있는 것이 확인되었다.

• Journal of Mechanical Science and Technology
• /
• 제14권3호
• /
• pp.298-305
• /
• 2000

The functionally graded material (FGM) is the new concept for a heat resisting material. FGM consists of ceramics on one side and metal on the other. A composition and microstructure of an intermediate layer change continuously from ceramics to metal at the micron level. This study is carried out to analyze the thermal shock characteristics of functionally graded PSZ/ metal composites. Heat-resistant property was evaluated by gas burner heating test using $C_2H_2/O_2$ combustion flame. The ceramic surface was heated with burner flame and the bottom surface cooled with water flow. Also, the composition profile and the thickness of the graded layer were varied to study the thermo mechanical response. Furthermore, this study carried out the thermal stress analysis to investigate the thermal characteristics by the finite element method. Acoustic emission (AE) monitoring was performed to detect the microfracture process in a thermal shock test.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제23회 KOSCO SYMPOSIUM 논문집
• /
• pp.119-124
• /
• 2001

Propane coflow diffusion flames have been experimentally studied to investigate the liftoff and reattachment characteristics. Flame properties such as velocity and density distribution were measured by LDV and shadowgraphy, respectively. It is shown that as the velocity of coflowing air increases, liftoff velocity decreases nonlinearly in turbulent jets and linearly in laminar jets, while reattachment velocity decreases nonlinearly. Meanwhile, as inner nozzle tip thickness increases, liftoff velocity increases with the reattachment velocity nearly unchanged. Liftoff phenomena in these flames can be categorized into three classes as a function of coflow velocity, such as laminar liftoff, turbulent liftoff, and transient liftoff.

• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.484-491
• /
• 1990

A heat-flux meter has been designed and manufactured to measure the heat flux from the flame. A calibration method of the heat-flux meter by a calibration furnace has also been proposed. The k-type (Chromel-Alumel) thermocouple material has been used as the material for the beat-flux meter. The electormotive force (e.m.f.) from the K-type thermocouple is shown to be linearly proportional to the heat flux absorbed. The characteristics of the heat-flux meter become better as the radius of heat absorbing disk becomes larger and its thickness thinner.

• Journal of Mechanical Science and Technology
• /
• 제18권5호
• /
• pp.857-864
• /
• 2004

The change in the NO emission indices (EINO) in a two-dimensional plane has been investigated, which is due to the interaction between a vortex and methane-air flames established at different equivalence ratios, by solving the field equation. After solving the field equation, the spatial distribution of G-values is obtained. The NO emission index is calculated after applying the appropriate relation between the G-values and the NO production rate or the mass fraction of methane obtained from the library of freely propagating flames created from detailed simulations. When a vortex exists in a reacting flow field, in general EINO slightly increases, whereas ElNO is lowered in the vicinity of the vortex regardless of flow direction. A change in vortex size has negligible impact on EINO$\_$T/ but increasing the vortex strength slightly increases EINO$\_$T/ in the domain of this study.