• Carbon letters
• /
• 제24권
• /
• pp.1-9
• /
• 2017

We studied the basic properties and fabrication of reduced graphene oxide (rGO) prepared using eco-friendly reduction agents in the graphene solution process. Hydrazine is generally used to reduce graphene oxide (GO), which results in polluting emissions as well as fixed nitrogen functional groups on different defects in the graphene sheets. To replace hydrazine, we developed eco-friendly reduction agents with similar or better reducing properties, and selected of them for further analysis. In this study, GO layers were produced from graphite flakes using a modified Hummer's method, and rGO layers were reduced using hydrazine hydrate, L-ascorbic acid, and gluconic acid. We measured the particle sizes and the dispersion stabilities in the rGO dispersed solvents for the three agents and analyzed the structural, electrical, and optical properties of the rGO films. The results showed that the degree of reduction was in the order L-ascorbic acid ${\geq}$ hydrazine > glucose. GO reduced using L-ascorbic acid had a sheet resistance of $121k{\Omega}/sq$, while that reduced using gluconic acid showed worse electrical properties than the other two reduction agents. Therefore, L-ascorbic acid is the most suitable eco-friendly reduction agent that can be substituted for hydrazine.

• 한국전기전자재료학회논문지
• /
• 제27권7호
• /
• pp.462-467
• /
• 2014

In this paper, we studied the magnetic composite sheets for electromagnetic wave noise absorber of quasi-microwave band by using soft magnetic FeSiCr and Fe50Ni flakes with the thickness of about $1{\mu}m$ and polymer. The magnetic hysteresis curve including saturation magnetization and residual magnetization and the complex permeability characteristics of the composite sheets were investigated to clarify the mixing effect on electromagnetic wave absorption properties. The saturation magnetization was decreased about 10% while the residual magnetization was increased about 15% and the real parts of complex permeability at below 500 MHz were increased 0.6~4 while those values at above 500 MHz were decreased 0.4~2.5 according to the change of contents of FeSiCr and Fe50Ni powders. As a result, the reflection loss can be moved to the lower frequency from 2~3 GHz to 1~1.5 GHz as the contents of Fe50Ni flaky powder into FeSiCr flaky powder was increased up to 50%.

• 산경연구논집
• /
• 제10권9호
• /
• pp.19-24
• /
• 2019

Purpose - In the digital era, technology advancement enables goods and services to be produced more efficiently but also create economy risk in the global economy including Indonesia. Previous studies stated that the risk can be mitigated through export diversification. This study investigates strategy to expand the markets for existing products and explore the potential market. Research design, data, and methodology - The criteria was followed using a review and considerations combination through the Focus Group Discussion (FGD) to determine the priority product in trading house of Indonesia. This study implemented market share to explore those products' markets and compare it to other ASEAN countries. Results - The Indonesian potential products are T-shirts, singlets and other vests of textile materials, knitted or crocheted (excluding cotton); food preparations; medicaments consisting of mixed or unmixed products for therapeutic or prophylactic purposes; soap in the form of flakes, granules, powder, paste or in aqueous solution; and cocoa powder, not containing added sugar or other sweetening matter. The market analysis also showed that Indonesia still had not optimally accessed yet the largest market in the world for each product. Conclusions - The government should focus more on increasing the competitiveness of those products, particularly in those global marketplaces.

• 자원리싸이클링
• /
• 제2권4호
• /
• pp.17-22
• /
• 1993

왕겨와 활성탄을 출발물질로 하여 탄소열 환원법으로 SiC 휘스커를 합성하였다. 그리고, 이에 있어서 가수와 첨가제의 영향을 조사하였다. 실험온도는 $1450^{\circ}C$ 이었고 합성도니 SiC 휘스커는 후처리 후 SEM, XRD 분석을 행하였다. 반응관내에 수소의 농도가 높을수록, 총유량이 클수록 휘스커의 생성율이 증가하였으며 가스의 유속이 Ar : $H_2$=300:45(cc/min)이고 NaF : $CaF_2$= 1:1가 되도록 혼합하여, 첨가하고, Ni를 flake ($1{\times}1$mm)로 첨가한 경우에 가장 양호한 형태의 휘스커를 얻을 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제22권3호
• /
• pp.17-25
• /
• 1994

This study was carried out to compare the properties of Com-Ply Boards with those of OSBs. These two kinds of boards were made of same flakes. Com-Ply Boards were covered with three different thickness veneers, such as 4mm, 3mm, and 2.5mm. All manufactured Com-Ply Boards and OSBs were 12mm thick. In MOR, all Com-Ply Boards were higher than OSB, and especially 3mm-veneer and 2.5mm-veneer Com-Ply Board were highest. But OSB showed 420kg/$cm^2$. 3mm-veneer Com-Ply Board showed the highest internal bonding 7.0kg/$cm^2$ and then 2.5mm-veneer showed 6.8kg/$cm^2$, and OSB showed 6.6kg/$cm^2$. Screw holding strength showed the high value 23.9kg/$cm^2$, 25.5kg/$cm^2$, and 29.3kg/$cm^2$ respectively at 3mm-veneer, 2.5mm-veneer Com-Ply Board and OSB. Thickness swelling of Com-Ply Boards was lower than that of OSB, but Water absorption of OSB was lower. Finally it was very encouraging that all properties of OSB without veneer, whose cost is higher than flake and whose properties is better, were not worse than those of Com-Ply Board with veneer. It seems That more researches on OSB will be required.

• Journal of Magnetics
• /
• 제19권4호
• /
• pp.340-344
• /
• 2014

An effective process was employed for synthesizing anisotropic magnetic $SmCo_7$-type alloy flakes with high coercivity, which is highly desirable for many applications. The highest coercivity of 16.3 kOe corresponds to a typical flake thickness of 200 nm for the 3-h ball-milled sample. The anisotropy field was calculated by measuring the parallel and perpendicular directions to the easy magnetization direction of the powders. The anisotropy field decreased with the increase of the ball milling time, thus indicating that the decrease of coercivity was mainly caused by the reduction of the anisotropy field. Microstructure analysis indicated that the morphology, grain size, and anisotropy field of these samples have a great influence on the magnetic properties.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2007년도 학술대회 1부
• /
• pp.1037-1044
• /
• 2007

Metallic paint is one of the most widely used coating in automotive, cosmetic and other applications because of its well-known ability to give a product realistic look which creates widespread consumer appeal. But, this coating has complicated subsurface structure which includes pigments, flakes, and transparent clearcoat. Though various analytic reflection models are available to simulate appearance of various surfaces, it is difficult to select an appropriate reflection model with faithful parameters for simulating this coating due to the complex subsurface structure of metallic paints. This paper presents a framework for accurate modeling of metallic coating by determining an appropriate reflection model among various existing BRDF (Bidirectional Reflectance Distribution Function) models. The selection of the appropriate model is achieved by measuring BRDF of various metallic paint samples using a BRDF measuring device i.e. gonioreflectometer and fitting an existing model to the measured data. Then, this model is effectively realized by rendering metallic painted surfaces. We believe that this framework can serve as a guide for those who wants to render metallic painted surfaces accurately with analytic BRDF model without expending time on extracting BRDF data using gonioreflectometer from real metallic paint sample.

• 한국의류산업학회지
• /
• 제8권5호
• /
• pp.577-584
• /
• 2006

The binding of heavy metal ions onto cross-linked chitosan in dilute aqueous solution has been investigated as a function of pH (4.0 and 7.0), agitation period (10-180min) and concentration of various metal cations (5, 10, 50 and 100ppm). In order to obtain adsorbents that are insoluble and stable, and prevent the dissolution loss of chitosan into an acidic aqueous solution, chitosan flakes were cross-linked with epichlorohydrine (ECH) and its adsorption behavior was compared with that of the non cross-linked chitosan. An advantage of ECH is that it does not eliminate the cationic amine functional group of chitosan. In terms of adsorption ratio, the chitosan cross-linked at an ECH was inferior to original chitosan and was found that chitosan has a selectivity much remarkable than the cross-linked chitosan in low concentrated metal solutions. However, no significant decreases in the adsorption ratios were observed between the cross-linked ECH-chitosan and the non cross-linked chitosan concerning the adsorption of $Ni^{2+}$, $Co^{2+}$, $Pb^{2+}$ and $Zn^{2+}$ acidic solution.

• 대한화학회지
• /
• 제7권1호
• /
• pp.51-57
• /
• 1963

It is well known that the graphite flakes become spherulite, when a suitable amount of nodulizing element, such as cerium or magnesium, is added to the cast iron. The change of graphite from flake to nodular shape improves not only the tensile strength but the ductility as well. However, the mechanism of spheroidization of graphite in cast iron has not yet been clearly understood, and various theories proposed by a number of investigators were such that it may be due to the special nucleation effect, prevention of flake formation by the adsorption of magnesium vapour on the graphite surface or file surface free energy difference between plain graphite and magnesium-adsorbed graphite. Regardless of the speculations of spheroidizing mechanism of the graphite in the cast iron, the final phenomenon comes to the conclusion that it may be due to the lack of wettability between graphite and iron matrix. In order to collaborate this fact through an experimental method, the authors have constructed a vacuum arc furnace for the wettability measurement as its first step. Our study and experiments were then directed to the comparison of the wettability between iron and graphite on the two cases (namely, the one where magnesium was preliminarily coated on the graphite surface and the other not coated), by means of contact angle measurements. The result was such that a significant difference of the contact angles has been shown between the above two cases. indicating the spheroidization of graphite which might have resulted from the lack of wettability between magnesium-adsorbed graphite and iron matrix.

• 열처리공학회지
• /
• 제20권4호
• /
• pp.195-202
• /
• 2007

Corrosion resistance and torque of M10 bolt coated with Magni 565 were investigated. Corrosion protection mechanism were also studied with the microstructure of coating film. The bolts with the optimum conditions showed around $10{\mu}m$ layer thickness, a great corrosion resistance in salt spray test and a proper torque in torque/tension test. But torque coefficient k increased with the number of bolting and clamping force of M10 bolt showed significantly lower than that of specified value 28.3kN. It was thought that the repeated bolting made the coating film peel off and powdery. The sample coated with optimum coating conditions showed more higher polarization resistance and corrosion potential than the specimens of top and base coat only. The base coating film was composed of lamellar zinc flakes, which provides a large sacrificial cathodic protection. Meanwhile, the top coating film was composed of organic aluminium pigments layer, which provides barrier protection to the corrosion circumstances.