• 한국가구학회지
• /
• 제24권3호
• /
• pp.226-238
• /
• 2013

In the 21st century, boundary between different fields is coming down, convergence and consilience are taking place. It would not be an exaggeration to say key buzzword of the 21st century is 'convergence'. Also in the field of art and design, the border between the two areas is getting more ambiguous. With the reason, both the new awareness and interest on Art Furniture are becoming more heightened. So far as part of the decorative art category Art Furniture was covered. However Art Furniture is now no longer a fixture of that field, but became independent as a new genre of art. As proof of this, at the international representative art fairs including the Design Miami, PAD London, and The Salon of Art and Design which was recently established in New York, etc. Art Furniture is becoming a showcase as the main pieces. Moreover, at the world's major art market Sotheby's, Christie's, and Seoul Auction, Art Furniture's position is more successfully becoming extended. At this point the analysis of the status and the cause on the non-boundary phenomena between art and design is inevitably required to understand the disposition of the public and to develop the domestic furniture industry. Thus, this paper purposes to present the new direction for that the domestic Art Furniture encompasses the two areas with satisfaction to the demands of the public by studying on the non-boundary phenomena between art and design in contemporary Art Furniture.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권3호
• /
• pp.27-33
• /
• 2001

The aim of the present work is to propose a model for Computer Aided programming of numerical Control lathe. This model is based on the concept by features. It has been developed in an Artificial Intelligence environment, that offers a rapidity as well as a precision for NC code elaboration. In this study a pre-processor has been elaborated to study the geometry of turning workpiece. This pre-processor is a hybrid system which combine a module of design by features and a module of features recognition for a piece provided from an other CAD software. Then, we have conceived a processor that is the heart of the CAD/CAM software. The main functions are to study the fixture of the workpiece, to choose automatically manufacturing cycles, to choose automatically cutting tools (the most relevant), to simulate tool path of manufacturing and calculate cutting conditions, end to elaborate a typical manufacturing process. Finally, the system generates the NC program from information delivered by the processor.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.714-717
• /
• 2005

The concept of jigs and fixtures makes it possible to build fixtures that can be dismantled at project completion. Since this concept is modular, it is not limited to any particular unit shapes or sizes. Various standards assure that each component assemble rapidly, to get precision and accuracy. Best suited for prototype and low volume production, as well as, start-up or zero-runs, it can also substitute for damaged dedicated fixtures to minimize down-time. It need to do DB for each part by Pro/Engineer and to assemble before manufacturing. In the future will assemble each of clamping and position parts by automation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.582-587
• /
• 1993

A robot application system is developed for dual purpose of stud welding and are welding to weld plates in the manufacturing of elevator cabin. The production quantity is not so big to accommodate separate stations for stud welding and are welding respectively while the need for randomization of the processes is urgent. A robot with specification for spot welding is chosen, which is appropriate for stud welding. Some implementations are made so that the robot may also be shared for are welding process. Common jig and fixture is designed for the dual purpose. Important aspects in the procedure of system design, installation, and commissioning are stated, and signal set-ups and logic diagrams are illustrated.

• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.104-109
• /
• 2012

Recently, the deburring process which is last process of manufacture is one of the important process for complete product. The manual deburring process can cause not only higher error rate but also irregular shape and quality of product. Therefore, Shape Guided Automatic Deburring Machine has been developed to resolve the above problems. But the Shape Guided Automatic Deburring Machine have been applied only to produce a circular product. Therefore, this machine is difficult to apply to products of various shapes. To solve this problem, we would like to develop Generalized Shape Guided Automatic Deburring Machine applicable to various shapes. To this end, we have done the modeling and design using CATIA program and have performed machine simulation.

• Computational Structural Engineering : An International Journal
• /
• 제1권1호
• /
• pp.21-29
• /
• 2001

The general topology optimization can be considered as optimal material distribution. Such an approach can be unstable, unless composite materials are introduced. In this research, a nodal volume fraction method is used to obtain the optimum topology of continuum structures. This method is conducted from a composite material model composed of isotropic matter and spherical void. Because the appearance of the chessboard patterns makes the interpretation of the optimal material layout very difficult, this method contains a chessboard prevention strategy. In this research, several topology optimization problems are presented to demonstrate the validity of the present method and the recursive quadratic programming algorithm is used to solve the topology optimization problems.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.409-412
• /
• 2003

An inverted-F antenna for wireless local area network (WLAN) is presented. The proposed design is based on the typical dual-band planar inverted-F antennas (PIFA), which have two tunable resonant modes. The low-profile antenna is built by stamping and designed to be mounted on the metal frame of the laptop LCD panel. The obtained antenna can perform in 2.4GHz and 5GHz bands and be adopted for other wireless applications. All the measurements are performed in the actual test fixture.

• 한국산학기술학회논문지
• /
• 제5권2호
• /
• pp.123-127
• /
• 2004

본 논문에서는 휴대용 무선통신기기에 응용 될 수 있는 유전체 기판에 인쇄된 접힌 모노폴(folded- monopole) 형태의 안테나가 소개 되었다. 제안된 디자인은 두개의 가지(branch)를 가지는 접힌 1/4파장(λ) 안테나를 모델로 개발 되었다. 수치해석으로 안테나의 파라미터들을 예측 하였고 그 결과에 따라 견본 안테나가 제작 되었다. 최적의 특성을 얻기 위해 몇 번의 수정을 거친 후에 본 논문에서 제안된 안테나가 제작 되었다. 본 논문에서 제안된 안테나는 2.4GH 주파수 대역에서 동작하고 주로 노트북PC에 장착되어 사용 될 수 있다. 제시된 모든 결과들은 실제 실험용 노트북PC에 장착된 상태에서 얻어진 것이다.

• 대한치과의사협회지
• /
• 제54권3호
• /
• pp.184-190
• /
• 2016

The osseointegration of titanium implants has been examined over the past 50 years. Many implant systems have been introduced and have become popular to the implant dentistry. The designs of the connection between implant fixture and abutment are divided into external vs internal connection. From beginning, the $Br{\aa}nemark$ system was characterized by an external hexagon. Internal connection has been developed to reduce stress transferred to the bone. These differences may have impact on the clinical procedures and protocols, laboratory and components costs, and incidence of complications. Therefore, the clinician has to know the different biomechanical features and understand their implications to produce successful implant-supported prosthesis with an external or an internal connection system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3322-3324
• /
• 1999

This paper studies on the design and fabrication of a micro in-plane positioning actuator integrated with a microlens. Proposed in-plane actuator is a micro XY-stage which is composed of two linear comb drive actuators being orthogonal to each other. In the fabrication of actuator, the single crystalline silicon substrate anodically bonded with a #7740 glass substrate is used because of simple release and passivation. The structure of actuator is formed on the silicon facet of bonded fixture by chlorine-based deep RIE and then released by isotropic wet etching of glass (#7740) in hydrofluoric acid solution. Fabricated actuator has a large travel range up to $30({\pm}15){\mu}m$ and high resolution less than 0.01f1l1l in each direction. Experimented resonant frequency of this actuator is 630Hz. The micro-Fresnel lens is fabricated on the square-shape glass structure prepared in the center of actuator.