• Journal of Mechanical Science and Technology
• /
• 제17권6호
• /
• pp.879-887
• /
• 2003

The flow in a parallel walled test channel, when obstructed with a geometry at the entrance, can be forward, reverse and stagnant depending on the position of the obstruction. This interesting flow phenomenon has potential benefit in the control of energy and various flows in the process industry In this experiment, the flat plate obstruction geometry was used as an obstruction at the entry of the test channel. The parameters that influence the flow inside and around the test channel were the gap (g) between the test channel and the obstruction geometry, the length (L) of the test channel and the Reynolds number (Re). The effect of the gap to channel width ratio (g/w) on the magnitude of the velocity ratio (V$\_$i/ / V$\_$o/ : velocity inside/ velocity outside the test channel) was investigated for a range of Reynolds numbers. The maximum reverse flow observed was nearly 20% to 60% of the outside velocity for Reynolds number ranging from 1000 to 9000 at g/w ratio of 1.5. The maximum forward velocity inside the test channel was found 80% of the outside velocity at higher g/w ratio of 8. The effect of the test channel length on the velocity ratio was investigated for different g/w ratios and a fixed Reynolds number of 4000. The influence of the Reynolds number on the velocity ratio is also discussed and presented for different gap to width ratio (g/w). The flow visualisation photographs showing fluid motion inside and around the test channel are also presented and discussed.

• 동아시아경상학회지
• /
• 제2권4호
• /
• pp.56-64
• /
• 2014

Today, travelers are provided large amount information which includes Web sites and tourist magazines about introduction of tourist spot. Many approaches have been proposed to analyze the large amount of available information with the aim of discovering the most popular Points of Tourist Interest and routes. However, it is not easy for users to process the information in a short time. Therefore travelers prefer to receive pertinent information easier and have that information presented in a clear and concise manner. Whether you are looking for banks by company, foreign exchange services, free wireless hotspots, touristic attractions, campsites, supermarkets, restaurants, cinemas, The aim of POI Tourism Services is to enable tourists to find spots that only the locals know, giving the tourists opportunity to the tourists to explore new areas of the place like never before. This paper proposes find the scope for a personalized service for tourist "Special Interest Tourism" recommendation for tourists who travel within India & for the benefit of Foreign Nationals who visit the country. The major focus of the study is to understand the demand for such a service being integrated into the conventional tour package. The major findings made during the course of the show that the market for "Special Interest Tourism" based services stands at approximately 63%. Travel today is mainly for the people from the middle income group having a fixed budget while traveling and would like economic travel solutions that fit their budget. This accounts for a major part of the market for the service. Most tourist prefer to go on week end getaways or trips that last more than a week, this means that a specialized trip plan based on the travelers interests is feasible with these type of travelers. Maximum demand for "Special Interest Tourism" based services would be during the festive seasons.

• 한국가금학회지
• /
• 제12권1호
• /
• pp.1-6
• /
• 1985

육용종계의 수정률을 향상시키기 위한 기초연구로서 산란능력과 수정율간의 상관관계를 분석하기 위하여 GPS 5계통을 가지고 실험한 결과 다음과 같은 성적을 얻었다. 1. 30주령에서 60주령까지의 평균산란율은 60.5-65.2%를 나타냈고 평균수정율과 평균란중은 각각 82.7-87.9%, 61.79-64.79$\ell$을 나타냈으며 산란율과 수정율은 일정한 주령에서 최대점을 나타내고 이후 감소하는 양상을 나타냈다.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.904-913
• /
• 2005

This paper deals with an integrated problem of inventory control and dynamic pricing strategies for a commodity with price and sales-period dependent demand pattern, where a seller and customers have complete information of each other. The problem consists of two parts; one is each buyer's benefit problem which makes the best decision on price and time for buyer to purchase items, and the other one is a seller's profit problem which decides an optimal sales strategy concerned with inventory control and discount schedule. The seller's profit function consists of sales revenue and inventory holding cost functions. The two parts are closely related into each other with some related variables, so that any existing general solution methods can not be applied. Therefore, a simplified model with single seller and two customers in considered first, where demand for multiple units is allowed to each customer within a time limit. Therewith, the model is generalized for a n-customer-classes problem. To solve the proposed n-customer-set problem, a dynamic programming algorithm is derived. In the proposed dynamic programming algorithm, an intermediate profit function is used, which is computed in case of a fixed initial inventory level and then adjusted in searching for an optimal inventory level. This leads to an optimal sales strategy for a seller, which can derive an optimal decision on both an initial inventory level and a discount schedule, in $O(n^2)$ time. This result can be used for some extended problems with a small customer set and a short selling period, including sales strategy for department stores, Dutch auction for items with heavy holding cost, open tender of materials, quantity-limited sales, and cooperative buying in the on/off markets.

• 정보처리학회논문지D
• /
• 제14D권1호
• /
• pp.107-120
• /
• 2007

IT 투자는 기업의 일반적인 투자와는 달리 직접적인 효과를 계량화하기 어려운 부분이 있기 때문에 경영자가 IT에 투자 의사결정을 내리기가 어렵다. IT 투자에 대한 타당성을 입증하기 위해서는 정보 제공자와 수혜자가 공감할 수 있는 객관적인 평가 체제의 수립과 신규 IT 투자에 대한 경제적 효과에 대한 계량적인 척도 및 측정 방법을 포함한 정량적인 분석 틀을 제시하는 것이 필요하다. 따라서 본 논문은 기존의 투자에 대한 타당성을 입증하기 위한 모델들의 장점을 수용하고 단점을 보완한 IT 투자와 그 투자에서 얻어지는 IT 효과를 분석하여 투자타당성을 입증할 수 있는 IT ROI 방법론을 개발하여 5개 업종 21개 기업에 적응한 결과를 반영한 IT ROI 시스템을 구축하였다. 이 시스템에 의해 정보시스템이 기업의 활동에 기여하는 효과에 대한 객관적인 타당성을 확보하여 IT 투자 의사결정을 도와주고, IT 투자를 보다 합리적으로 결정할 수 있어 효율적인 IT 투자가 이루어질 수 있는 체계를 제시한다.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제2권11호
• /
• pp.795-800
• /
• 2013

한우 발정기의 조기 탐지는 축산 농가의 경제성을 향상시키는 매우 중요한 연구 과제 중 하나이다. 이를 위한 다양한 방법들이 제안되었으나, 현재까지도 시스템의 경제성 문제를 포함한 조기 발정 탐지 및 탐지 정확도 등에 여전히 취약한 점이 있는 것이 사실이다. 본 논문에서는 감시카메라 환경에서 축사내 승가 행동을 포함하는 한우의 특이 행동들을 탐지하는 다중 객체의 특이 행동 탐지 프로토타입 시스템을 제안한다. 다중 객체의 특이 행동 탐지란 감시카메라로부터 유입되는 영상에서 다중 객체가 위험에 처한 상황 혹은 비정상적인 행동들을 신속하고 정확하게 탐지하는 분야를 말한다. 제안된 시스템은 한우 축사에 고정 설치된 카메라의 입력 동영상으로 부터 움직임 벡터 정보를 이용하여 영상내의 움직임 정보를 추출 표현하였으며, 특이 행동의 판별 문제를 실용적 차원의 단일 클래스 분류 문제로 재해석하여 단일 클래스 SVM의 대표적 모델인 SVDD를 탐지기로 설계하였다. 실제로 진주에 위치한 한 축사에서 취득한 한우 암소의 영상 정보를 이용하여 본 논문에서 제안한 시스템의 성능을 실험적으로 검증한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.226-226
• /
• 2013

Si is a dominant solar material, which is the second most abundant element in the earth giving a benefit in the aspect in cost with low toxicity. However, the inherent limit of Si has an indirect band gap of 1.1 eV resulting in the limited optical absorption. Therefore, a critical issue has been raised to increase the utilization of the incident light into the Si absorber. The enhancement of light absorption is a crucial to improve the performances and thus relieves the cost burden of Si photovoltaics. For the optical aspect, an efficient design of a front surface, where the incident light comes in, has been intensively investigated to improve the performance of photon absorption. Lambertian light trapping can be attained when the light active surface is ideally rough to increase the optical length by about 50 compared to a planar substrate. This suggests that an efficient design may reduce thickness of the Si absorber from the conventional 100~300 ${\mu}m$ to less than 3 ${\mu}m$. Theoretically, a hole-array structure satisfies an equivalent efficiency of c-Si with only one-twelfth mass and one-sixth thickness. Various approaches have been applied to improve the incident light utilization in a Si absorber using textured structures, periodic gratings, photonic crystals, and nanorod arrays. We have designed hole and pillar structured Si absorbers. Four-different Si absorbers have been simultaneously fabricated on an identical Si wafer with hole arrays or pillar arrays at a fixed depth of 2 ${\mu}m$. We have found that the significant enhanced solar cell performances both for the hole arrayed and pillar arrayed Si absorbers compared to that of a planar Si wafer resulting from the effective improvement in the quantum efficiencies.

• 한국멀티미디어학회논문지
• /
• 제8권1호
• /
• pp.9-18
• /
• 2005

본 논문에서는 MPEG-4부호화기에서 인트라 프레임의 양자화 레벨을 구하는 방법을 제안한다. 인트라 프레임은 GOP 내에서 참조 프레임으로써 다른 프레임에 계속 전파되므로 이 프레임의 성능에 의해 전체 GOP의 성능이 크게 영향을 받을 만큼 중요한 부분이다. 본 논문에서는 인트라 프레임 의 양자화 레벨을 효과적으로 구할 수 있도록 할당된 비트 수와 입력되는 영상의 복잡도, 그리고 GOP의 구조를 이용하는 방법을 제안한다 실험 결과에서는 기존의 방법들이 고정된 값을 사용하여 효율이 저하되거나 영상의 특성에 따라 상이한 성능을 보이는데 비하여 본 논문의 방법은 다양한 영상에 대하여 안정된 결과를 보였다. 제안한 방법을 MPEG-4검증모델에서 선택한 Q2 알고리듬과 비교할 때 영상의 특성에 따라 조금씩의 차이는 있지만 높은 비트 율에서 최대 3.49dB 정도의 높은 이득을 얻을 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2290-2295
• /
• 2005

In this paper, it is developed simulator system of 3 D.O.F parallel robot for educate of expertness. This simulator system is composed of three parts ? 3 D.O.F parallel robot, controller (hardware) and software. First, basic structure of the robot is 3 active rotary actuator that small geared step motor with fixed base. An input-link is connected to this actuator, and this input-link can connect two ball joints. Thus, two couplers can be connected to the input-link as a pair. An end-plate, which is jointed by a ball joint, can be connected to the opposite side of the coupler. A sub-link is produced and installed to the internal spring, and then this sub-link is connected to the upper and bottom side of the coupler in order to prevent a certain bending or deformation of the two couplers. The robot has the maximum diameter of 230 mm, 10 kg of weight (include the table), and maximum height of 300 mm. Hardware for control of the robot is composed of computer, micro controller, pulse generator, and motor driver. The PC used in the controller sends commands to the controller, and transform signals input by the user to the coordinate value of the robot by substituting it into equations of kinematics and inverse kinematics. A controller transfer the coordinate value calculated in the PC to a pulse generator by transforming it into signals. A pulse generator analyzes commands, which include the information received from the micro controller. A motor driver transfer the pulse received from the pulse generator to a step motor, and protects against the over-load of the motor Finally, software is a learning purposed control program, which presents the principle of a robot operation and actual implementation. The benefit of this program is that easy for a novice to use. Developed robot simulator system can be practically applied to understand the principle of parallel mechanism, motors, sensor, and various other parts.

• The Journal of Advanced Prosthodontics
• /
• 제5권3호
• /
• pp.226-233
• /
• 2013

PURPOSE. This study evaluated the adhesion of 10-MDP containing self-etch and self-adhesive resin cements to dentin with and without the use of etch-and-rinse technique. MATERIALS AND METHODS. Human third molars (N=180) were randomly divided into 6 groups (n=30 per group). Conventional (Panavia F2.0, Kuraray-PAN) and self-adhesive resin cements (Clearfil SA, Kuraray-CSA) were bonded to dentin surfaces either after application of 3-step etch-and-rinse (35% $H_3PO_4$ + ED Primer) or two-step self-etch adhesive resin (Clearfil SE Bond). Specimens were subjected to shear bond strength test using the universal testing machine (0.5 mm/min). The failure types were analyzed using a stereomicroscope and quality of hybrid layer was observed under a scanning electron microscope. The data (MPa) were analyzed using two-way ANOVA and Tukey's tests (${\alpha}$=.05). RESULTS. Overall, PAN adhesive cement showed significantly higher mean bond strength ($12.5{\pm}2.3-14.1{\pm}2.4$ MPa) than CSA cement ($9.3{\pm}1.4-13.9{\pm}1.9$ MPa) (P<.001). Adhesive failures were more frequent in CSA cement groups when used in conjunction with two-step self-adhesive (68%) or no adhesive at all (66%). Hybrid layer quality was inferior in CSA compared to PAN cement in all conditions. CONCLUSION. In clinical situations where bonding to dentin substrate is crucial, both conventional and self-adhesive resin cements based on 10-MDP can benefit from etch-and-rinse technique to achieve better quality of adhesion in the early clinical period.