• Speech Sciences
• /
• v.3
• /
• pp.177-186
• /
• 1998

This paper describes the procedure of implementing a real-time speech codec, G.723.1 which was developed by DSP Group and standardized by ITU-T, using fixed-point DSP, ADSP-2181. This codec has two bit rates associated with it, 5.3 and 6.3 kbit/s. We implemented only one bit rate, 6.3 kbit/s, of the two with fixed-point 32-bit precision. According to the result of the experiment, the amount of computational burden is about 55 MIPS and its quality is similar to the result of the PC simulation with floating-point arithmetic. In this paper, we proposed a method to use a fixed-point DSP and a procedure for developing a real-time speech codec using DSPs and finally developed a G.723.l speech codec for ADSP-2181.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.3
• /
• pp.454-468
• /
• 1997

This paper presents a bitwidth optimization algorithm for efficient hardware sharing in digital signal processing system. The proposed algorithm determines the fixed-point representation for each signal through bitwidth optimization to generate the hardware requiring less area. To reduce the operator area, the algorithm partitions the abstract operations in the design description into several groups, such that the operations in the same group can share an operator. The partitioning result are fed to a high-level synthesis system to generate the pipelined fixed-point datapaths. The proposed algorithm has been implemented in SODAS-DSP an automatic synthesis system for fixed-point DSP hardware. Accepting the models of DSP algorithms in schematics, the system automatically generates the fixed-point datapath and controller satisfying the design constraints in area, speed, and SNR(Signal-to-Noise Ratio). Experimental results show that the efficiency of the proposed algorithm by generates the area-efficient DSP hardwares satisfying performance constraints.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.517-520
• /
• 2003

Orthogonal Frequency Division Multiplexing (OFDM) is a promising technology for high speed multimedia communication in a frequency selective multipath channel. In this paper, Software IPs for the synchronizer of IEEE 802.11a Wireless LAN system are designed and optimized for TI's TMS320C6201 fixed point DSP. As a result of the execution cycles of the target DSP for each functions of the system, an efficient HW/SW partitioning method can be considered.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.4
• /
• pp.234-239
• /
• 2006

In the past decade, several tools have been developed to automate the floating-point to fixed-point conversion for DSP systems. In the conversion process, a number of scaling shifts are introduced, and they inevitably alter the original code sequence. Recently, we have observed that a compiler can often be adversely affected by this alteration, and consequently fails to generate efficient machine code for its target processor. In this paper, we present an optimization technique that safely migrates scaling shifts to other places within the code so that the compiler can produce better-quality code. We consider our technique to be safe in that it does not introduce new overflows, yet preserving the original SQNR. The experiments on a commercial fixed-point DSP processor exhibit that our technique is effective enough to achieve tangible improvement on code size and speed for a set of benchmarks.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.55-59
• /
• 2003

In this paper, we estimate the performance requirements of general-purpose DSP for Carrier Recovery of OFDM DVB-T receiver. Firstly, we transported the designed fixed-point OFDM DVB-T model to a floating-point software model written in C. Then, we measured the number of instruction cycles required for operation of Carrier Recovery in time. We use SignalMaster$\^$TM/ DSP platform of LYRtech Inc. as a environment of estimation, and Simulink$\^$TM/ as a graphical interface, Code Composer StudioTM of TI as profiler and compiler, and SPW$\^$TM/ for presenting functional reliability and comparing the performance distortion with fixed-point model. As a result, we show the required number of DSPs in our DSP-based system, and introduce the need of Multi-DSP-based system.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.43-45
• /
• 2004

This paper represents the improvement of floating point operation for AC servo motor controller based on fixed point operation DSP. TMS320F2812 has fixed point operation processing structure. The controller parameters are modified to the digitized data by scaling the original parameters. TMS320F 2812 is a 32-bit processor, and it could have enough accuracy to get the digitized data this procedure is implemented and the experiments controling a AC servo system.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1196-1198
• /
• 2004

This paper represents the improvement of floating point operation for AC servo motor controller based on fixed point operation DSP. TMS320F2812 has fixed point operation processing structure. The controller parameters are modified to the digitized data by scaling the original parameters. TMS320F 2812 is a 32-bit processor, and it could have enough accuracy to got the digitized data this procedure is implemented and the experiments controling a AC servo system.

• Speech Sciences
• /
• v.6
• /
• pp.219-233
• /
• 1999

This paper presents a real-time implementation of a speaker independent speech recognition system based on a discrete hidden markov model(DHMM). This system is developed for a car navigation system to design on-chip VLSI system of speech recognition which is used by fixed point Oak DSP core of DSP GROUP LTD. We analyze recognition procedure with C language to implement fixed point real-time algorithms. Based on the analyses, we improve the algorithms which are possible to operate in real-time, and can verify the recognition result at the same time as speech ends, by processing all recognition routines within a frame. A car noise is the colored noise concentrated heavily on the low frequency segment under 400 Hz. For the noise robust processing, the high pass filtering and the liftering on the distance measure of feature vectors are applied to the recognition system. Recognition experiments on the twelve isolated command words were performed. The recognition rates of the baseline recognizer were 98.68% in a stopping situation and 80.7% in a running situation. Using the noise processing methods, the recognition rates were enhanced to 89.04% in a running situation.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.257-258
• /
• 2006

In this paper, we address several issues in the real time implementation of MPEG-1 Layer II decoder on a fixed-point digital signal processor (DSP), especially TMS320C6416. There is a trade-off between processing speed and the size of program/data memory for the optimal implementation. In a view of the speed optimization, we first convert the floating point operations into fixed point ones with little degradation in audio quality, and then the look-up tables used for the inverse quantization of the audio codec are forced to be located into the internal memory of the DSP. And then, window functions and filter coefficients in the decoder are precalculated and stored as constant, which makes the decoder faster even larger memory size is required. It is shown from the real-time experiments that the fixed-point implementation enables us to make the decoder with a sampling rate of 48 kHz operate with 3 times faster than real-time on TMS320C6416 at a clock rate of 600 MHz.

• Journal of the Semiconductor & Display Technology
• /
• v.3 no.1
• /
• pp.21-26
• /
• 2004

Recently with the development of power switching device and DSP which has peripheral devices to control AC servo system, the servo technology has met a new development opportunity. Those things make it possible to reduce the time of developing a AC servo system. Fixed point DSP such as TMS320F240x, and TMS320F28x series have a disadvantage in calculating floating number where TMS320C32 or TMS320C31 are floating point DSP. However they usually become a complex hardware system to implement the AC servo system and it increases the cost. In this study, a DSP based AC servo system with a 3-phase PMSM is proposed. The newly produced DSP TMX320F28l2-version C which has the performance of fast speed, 150MIPS, and a rich peripheral interface such as a 12bit high speed AD converter, QEP(Quadrature Encoder Pulse) circuit, PDPINT(Power Drive Protect Interrupt), SVPWM module and dead time module are used. This paper presents a method to overcome fixed point calculating using scaling all parameters. Also space vector pulse width modulation (SVPWM) using off-set voltage and a digital PI control are implemented to the servo system.