• Journal of the Korean Home Economics Association
• /
• v.34 no.4
• /
• pp.249-263
• /
• 1996

According to the design method for constructing the G gori(the traditional Korean jacket)collar, there are differences in form after its completion. In the construction design of the midsection of the gusset as in that of the basic G gori, not only was the positioning of the two sides of the collar not smooth, but also, when the collar strip was attached, there would be an imbalance on one side or the other so that it was difficult to achieve symetry. Therefore in this project, by applying the pattern design of the gusset midsection to that of the collar midsection, not only did attaching the collar and the collar strip create a visual effect by equalizing the lengths of the tow sides, but the construction was also easy. This method of construction introduces the three-dimensional aspect of the human form in its conic, spherical and cylindrical aspects, so that, through schematizing the scientific character of Korea's clothing, its appropriateness is verified. As a matter of fact, since th-ere in no standardization of pattern whether for educational use or for mass-produced clothing, so that even the patterns used in computer-assisted design are executed according to the designer's personal skill, the reality is that after completion of construction the quality has not been uniform. For this schematization, inverse calculation of measurements pertaining to the calculation formula and of teaching materials has been referenced. In particular, the partial requlation of the calculation formula pertaining to the basic pattern construction, the method of making the collar midsection, and the construction method of the extreme and mean ratio adjustment can be adjusted for all measurements, thereby providing the establishment of a design criterion and the possibility of the standardization of construction methods. The production method for the pattern design is as follows: 1) The conic angle for the G gori's girth, length and neck width is fixed at 70 degrees. 2) The radius of the cone is B/2. 3) The calculation formula is B/4 + 1.5cm 4) The armhole formula is B/4, the same as in the basic method. 5) The width formula is B/10. 6) The ratio of the collar junction(width of collar + width of collar strip)to the gusset length is 5:8. 7) The length of the side seam is a length intersecting the armhole line and the conic radius (B/2), that is an arc that exceeds the length of the G gori's midsection; the component ratio of this length to the collar junction is accordingly 13:5. 8) The curve frame length of the back midsection is an arc exceeding B/4(the armhole line). 9) The ratio of the sleeve opening calculation formula to the armhole length is 8:5, forming an arc with the midsection length.

• Journal of Drive and Control
• /
• v.17 no.2
• /
• pp.28-37
• /
• 2020

It is difficult to analytically derive the relationship among volumetric displacement, flowrate, torque, and rotation speed regarding an instantaneous position of gerotor hydraulic pumps/motors. This can be explained by the geometric shape of the rotors, which is highly complicated. Herein, an analytical method for the instantaneous torque, rotation speed, flowrate, and volumetric displacement of a pump/motor is proposed. The method is based on two physical concepts: energy conservation and torque equilibrium. The instantaneous torque of a pump/motor shaft is determined for the posture of rotors from the torque equilibrium. If the torque equilibrium is combined with the energy conservation between the hydraulic energy of the pump/motor and the mechanical input/output energy, the formula for determining the instantaneous volumetric displacement and flowrate is derived. The numerical values of the instantaneous volumetric displacement, torque, rotation speed, and flowrate are calculated via the MATLAB software programs, and they are illustrated for the case in which inner and outer rotors rotate with respect to fixed axes. The degrees of torque fluctuation, speed fluctuation, and flowrate fluctuation can be observed from their instantaneous values. The proposed formula may provide a better understanding of the design or analysis process of gerotor pumps/motors.

• Journal of the Korean Chemical Society
• /
• v.3 no.1
• /
• pp.23-27
• /
• 1954

The relation between the height of ascending solvents and its velocity were studied with strips of Toyo No. 50 filter paper. The filter paper strip of 3cm width and cat 30 cm length is hooked down or fixed between two sheets of glass plates inside a cylinder containing the solvent, in which the lower end of the strip is dipped. As the solvents, acetone, hydrochloric acid, water or mixtures of these are used. For short time intervals, Ostwald's folmula $h = Kt^n$ was found to be most suitable to express the relation between the height of the solvent front, h, and time, t. For longer time intervals, results will be discussed in the next paper. The mean values of the constant m in the above formula for pure acetone and pure water were 0.44 and 0.485, respectively, and that of K were 0.05 and 2.4, respectively. The time interval whose the above formula applies, for each solvent was 2 hours for the former, and a half hour for the later, respectively. The movement of solutes, such as $Cu^{++}$ and $Fe^{++}$ showed that the Rf values of solutes become constant values after a long periods; e.g., ca. 6 hours with 10N-HCl-Acetone (1 : 9) solvent.

• Journal of KIISE:Software and Applications
• /
• v.34 no.7
• /
• pp.616-624
• /
• 2007

Sudoku can be regarded as a SAT problem. Various encodings are known for encoding Sudoku as a Conjunctive Normal Form (CNF) formula, which is the standard input for most SAT solvers. Using these encodings for large Sudoku, however, generates too many clauses, which impede the performance of state-of-the-art SAT solvers. This paper presents an optimized CNF encodings of Sudoku to deal with large instances of the puzzle. We use fixed cells in Sudoku to remove redundant clauses during the encoding phase. This results in reducing the number of clauses and a significant speedup in the SAT solving time.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.69-70
• /
• 2020

Accidents in the construction industry are very high compared to other industries, and the number is also increasing steeply every year. Relevant studies were limited for solving the problems. The purpose of this study is to develop a comprehensive risk prediction process for personnel deployed at construction sites on safety management. First of all, the variables were divided into fixed, real-time and working types variables, and the relevant comprehensive data were collected. Second, the probability of a disaster was derived based on the collected data, and weights for each variable were calculated using the dummy regression analysis method using statistical methodology. Lastly, the resulting weighting and disaster probability equation was constructed, and The Final Risk Calculation Formula was developed. The Final Risk Calculation Formula presented in this study is expected to have a significant impact on the establishment of effective safety management measures to prevent possible safety accidents at construction sites

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.13 no.3
• /
• pp.2349-2371
• /
• 1971

1. The historical development of the agriculture in Korea is observed and the future of Korean agriculture is suggested with present situation in order to recommend a direction of policy in agricultural mechanization. 2. A factor analysis of agricultural mechanization The needs of agricultural mechanization in the view of both national need and the armer's desire under the present situation are analyzed with data from the various sources. The researcher found that the agricultural mechanization is badly needed to develop prospective Korean agriculture to future. 3. The direction of agricultural mechanization. It can be said that the position of agriculture in the national economy plays a very important role. This importance should not be ignored by the Politicians in their process of developing long range economy plan. The agricultural mechanization for the modernized Korean agriculture should be directed to increase the most effective results with minimize the least sacrifice. The merry tiller is recommended to the main agricultural machinery in Korea in order to meet its small farming operation un-its(or farm size). Tractor is recommended in the plain area for the crop cultivation. The cooperative cultivation for rice and the upland crops will be developed in the plain area. Tractor, therefore, is recommended for the main agricultural machinery in these areas. Either tractor or merry tiller is recommended to the orchard area by its operating size of the orchard. The researcher also disoussed about the development of animal husbandry on the farm with increasing the farm size in order to develop meadow and pasture nuder the consideration of both the improvement of food consumption and the comprehensive development of national resources. 4. Relationship between the Performance of various agricultural machinery and the economic scale. Because of the agricultural machinery needs an expensive fixed expense(fixed cost) the total expense Per ha of the fixed expense and the operation expense should less than the traditional expense Per Dan Bo with in creased corpgiclds Per Dan Bo. Since the anual fixed expense of the agricultural machinery is figured out by the durability the more the farm size the less fixed expense of machinery is required. The formula of this principle is as follows; fixed expense for Dan Bo=Fixed expense of agricultural machinery farm size(or farming scale) The breaking-even point is the balance point between the expense of the using agricultural machinery and the traditional farming expenses. Labor cost of the Dan Bo is increasing when the management scale increases by the tradititional farming while the machanized management decrease the management cost Per Dan Bo. The reseracher found that the distribution of agricultural machinery will be the adeventeous after the year of 1981 by the result of frguring out the breaking-even point. 5. The Investigate and the conclusion. The purpose of this study is found out the direction of agricultural machanization and the breaking-even point of various agricultural machinery, there for is found out effective of the using various agricultural machinery for Collection cutter, Binder, Footing thresser, Semi-power thresser, Power thresser, Combine, Power rice-Trans-Planter, etc.

• The korean journal of orthodontics
• /
• v.26 no.3
• /
• pp.281-290
• /
• 1996

Determination of force system and prediction of side effects from unbent straight wire engaged in edgewise bracket is clinically very difficult because it is statically indeterminate system. This study is to develop a linear beam theory that explains the force system for straight wire engaged in edgewise bracket regardless of geometry(a/b), material, cross section of wire, and interbracket distance. 1. Formula for force system of bilateral fixed end beam was derived. 2. It is possible to calculate force system of each tooth engaged in continuous straight wire. 3. The possibility and location of permanent deformation can be predicted.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.3
• /
• pp.327-330
• /
• 2021

Though the stability review of buoyancy is generally done, the stability review of buoyancy moment, which is generated from the eccentricity between the center of fixed load and that of buoyancy, is not done in the water treatment concrete structure and the architectual structure. In this review, as the buoyancy force become larger, the action point of the fixed load (ΣW) and buoyancy (B), and the reaction distribution were considered to confirm the formation of the buoyancy moment rotational point and obtained the rotational uplift stability review formula for buoyancy moment in the water treatment concrete structure and the architechual structure, and put forward the stability review method for buoyancy moment.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.11 no.4
• /
• pp.19-33
• /
• 1982

Briquette ashes, one of important solid wastes in Korea, have relatively high compression strength in spite of their low density, and provide sufficient surface area and some adsorption capacity. Results of this research show that a fixed-film biological process using briquette ashes as media can accomplish BOD removal efficiencies in treating organic wastewaters such as alcoholic waste, diluted nightsoil and sewage , and formula can be derived to determine the effluent BOD concentrations by superficial or volumetric organic loadings. Settling tanks may be required because effluent SS concentration is deteriorated due to the SS in influent or due to the slough-off of slime layer on the media when briquette ashes are utilized for a long period.

• Journal of the Korean Home Economics Association
• /
• v.37 no.7
• /
• pp.17-27
• /
• 1999

According to the design method for constructing the Korean Men's Jo-go-ri(the traditional Korean jacket)collar, there are differences in form after its completion. In the construction design of the midsection of the gusset as in that of the basic pattern Jo-go-ri, not only was the positioning of the two sides of the collar not smooth, but also, when the collar strip(Dongjung) was attached, there would be an imbalance on one side or the other so that it was difficult to achieve symmetry. Therefore in this project, by applying the pattern design of the gusset midsection to that of the collar midsection, not only did attaching the collar(Kit) and the collar strip create a visual effect by equalizing the lengths of the two sides, but the construction was also easy. This method of construction introduces the three-dimensional aspect of the human form in its conic, spherical and cylindrical aspects, so that, through schematizing the scientific character of Korea's clothing, its appropriateness is verified. As a matter of fact, since there is no standardization of pattern whether for educational use or for mass-produced clothing, so that even the patterns used in computer-assisted design are executed according to the designer's personal skill, the reality is that after completion of construction the quality has not been uniform. For this schematization, inverse calculation of measurements pertaining to the calculation formula and of teaching materials has been referenced. In particular, the partial regulation of the calculation formula pertaining to the basic pattern construction, the method of making the collar midsection, and the construction method of the extreme and mean ratio adjustment, can be adjusted for all measurements, thereby providing the establishment of a design criterion and the possibility of the standardization of construction methods. The production method for the basic pattern design is as follows: 1) The conic angle for the Jo-go-ri's girth, length end neck width is fixed at 70(72) degree. 2) The radius of the cone is sleeve length. 3) The bust girth calculation formula is B/4 + 2.5 cm. 4) The armhole formula is B/4 + 2.5cm. 5) The neck width formula is B/10. 6) The ratio of the collar junction{width of collar(Kit) + width of collar strip(Dongjung) to the gusset length is 5:8. 7) The length of the side seam is a length intersecting the armhole line and the conic radius of sleeve length, that is an arc that exceeds the length of the Jo-go-ri's midsection.