• 한국태양에너지학회 논문집
• /
• 제36권4호
• /
• pp.57-65
• /
• 2016

Domestic photovoltaic system for roof-top is installed towards the south at an angle of 20 to 35 degrees and the shape of PV array is divided into two kinds; a plane shape and a curved shape. This paper aims to understand an actual condition of PV facility and strengths and weaknesses of support structure production and installation and to consider the best PV surface shape by analyzing theoretical logics of these two surface shapes and architectural perspective-based realistic case studies. This study targeted 98 facilities including common houses, public institutions and education institutions. In common houses, all of 59 PV facilities have a plane surface. In public institutions, 7 of 15 PV facilities have a curved array surface and 8 PV facilities have a plane surface. In education institutions, also, 14 of 24 PV facilities have a plane array surface and 10 PV facilities have a curved surface. Most of 98 facilities have a flat roof supporting shape. However, it was found that the curved shape wasn't positive for PV generation due to the change of radial density and it was at least 10 % more expensive to produce its structure. Also, domestic general large single-plate PV facilities have problems of harmony with buildings and wind load. Therefore, it is considered that for fixed-type roof-top PV, a plane PV array shape is good for optimum generation and economic efficiency and a parallel array structure on the roof surface is favorable to wind load and snow load without being a hindrance to the building facade.

• 한국재료학회지
• /
• 제29권12호
• /
• pp.774-780
• /
• 2019

The performance of Li-ion hybrid supercapacitors (asymmetric-type) depends on many factors such as the capacity ratio, material properties, cell designs and operating conditions. Among these, in consideration of balanced electrochemical reactions, the capacity ratio of the negative (anode) to positive (cathode) electrode is one of the most important factors to design the Li-ion hybrid supercapacitors for high energy storing performance. We assemble Li-ion hybrid supercapacitors using activated carbon (AC) as anode material, lithium manganese oxide as cathode material, and organic electrolyte (1 mol L^-1 LiPF₆ in acetonitrile). At this point, the thickness of the anode electrode is controlled at 160, 200, and 240 ㎛. Also, thickness of cathode electrode is fixed at 60 ㎛. Then, the effect of negative and positive electrode ratio on the electrochemical performance of AC/LiMn₂O₄ Li-ion hybrid supercapacitors is investigated, especially in the terms of capacity and cyclability at high current density. In this study, we demonstrate the relationship of capacity ratio between anode and cathode electrode, and the excellent electrochemical performance of AC/LiMn₂O₄ Li-ion hybrid supercapacitors. The remarkable capability of these materials proves that manipulation of the capacity ratio is a promising technology for high-performance Li-ion hybrid supercapacitors.

• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3715-3721
• /
• 2013

In this study, the behavior of cells on the modified surface, and the correlation between the modified substrates and the response of cells is described. A close-packed layer of nano-sized silica beads was prepared on a coverslip, and the adhesion, proliferation, and migration of BALB/3T3 fibroblast cells on the silica layer was monitered. The 550 nm silica beads were synthesized by the hydrolysis and condensation reaction of tetraethylorthosilicate in basic solution. The amine groups were introduced onto the surfaces of silica particles by treatment with 3-aminopropyltrimethoxysilane. The close-packed layer of silica beads on the coverslip was obtained by the reaction of the amine-functionalized silica beads and the (3-triethoxysilyl)propylsuccinic anhydride treated coverslip. BALB/3T3 fibroblast cells were loaded on bare glass, APTMS coated glass, and silica bead coated glass with the same initial cell density, and the migration and proliferation of cells on the substrates was investigated. The cells were fixed and stained with antibodies in order to analyze the changes in the actin filaments and nuclei after culture on the different surfaces. The motility of cells on the silica bead coated glass was greater than that of the cells cultured on the control substrate. The growth rate of cells on the silica bead coated glass was slower than that of the control. Because the close-packed layer of silica beads gave an embossed surface, the adhesion of cells was very weak compared to the smooth surfaces. These results indicate that the adhesion of cells on the substrates is very important, and the actin filaments might play key roles in the migration and proliferation of cells. The nuclei of the cells were shrunk on the weakly adhered surfaces, and the S1 stage in which DNA is duplicated in the cell dividing processes might be retarded. As a result, the rate of proliferation of cells was decreased compared to the smooth surface of the control. In conclusion, the results described here are very important in the understanding of the interaction between implanted materials and biosystems.

• 한국환경보건학회지
• /
• 제24권1호
• /
• pp.62-69
• /
• 1998

It has been studied that the measurement of odor component emission at confectionery manufacture. The objects of this study were to investigate reduction of offensive odor. The survey effects of odorous materials are presented as follows. The countermeasure of operating process is to minimize sludge sediment in each unit facility. Especially, in summer, we have to clean the sludge frequently, because anaerobic decomposing is likely to occur easily. The sludge or scum from sedimentation tank pond, and floating tank should be treated quickly. We should avoid overloading operation. In the case of overloading, dissolved oxygen should be increased, the quality of wastewater input should be decreased. When dried cakes from condense tank or floating tank are left in treatment plant, we should cover, to prevent diffusion of smell with masking materials. The seasonal condition of operating should be fixed and the kind of coagulants should be changed because the wastewater in each season have different loading rates and organic materials. Odorous materials are very sensitive to the seasonal temperature variation. Especially, when the amount of rainfall is small and the high temperature of maintenance in long periods, air diffusion rate is large, so odorous materials can make great effect on surroundings comparision with other periods. To reduce odorous gas, as short term method, we had better take ceramic addition method. Especially, in summer we should take ceramic addition method. Also, as long term method, the size of wastewater treatment facility is the most important in the normal operating of wastewater treatment facility. But wastewater treatment facilities in this factory are too old, treatment process is old fashion, and the size is too small. So, large wastewater quantity to treat in summer. As results, the expansion of wastewater treatment facility and the process of improvement are required. Restriction level of odor was exceed. As it is overloaded in summer, the basis cause of odor is that the size of wastewater treatment facility is small. The prediction of air quality equilibrium density variation show that the odorous materials from working place are Amine materials whose smell strength is about 2.5(a little strong degree). We can suppose that in summer is sensitive to temperature variation, smell strength is larger as to reduce the origin of odor. We must expand wastewater treatment facility and improve the process A.S.A.P.

• 전력전자학회논문지
• /
• 제14권2호
• /
• pp.120-127
• /
• 2009

본 논문에서는 고효율 및 고전력밀도의 새로운 주파수 가변형(PFM) 직렬 부스트 캐패시터(SBC) 풀 브리지 DC/DC 컨버터를 제안한다. 제안된 회로는 기존 위상천이 풀 브리지 컨버터와 달리 스위칭 주파수에 따라 직렬 부스트 캐패시터의 전압을 가변하여 출력전압을 제어하는 방식으로, 50% 고정 시비율로 구동되므로 환류구간이 존재하지 않아 도통손실이 작다. 또한 넓은 부하 영역에 대해 영전압 스위칭 동작이 보장되며, 출력 인덕터 전류 리플도 매우 작아 출력 인덕터의 사이즈를 줄일 수 있어 대전류 사양에 매우 적합한 장점을 갖는다. 본 논문에서는 제안된 회로의 이론적 해석 및 PSIM Simulation을 수행하며, 이를 실제로 1.2kW급(12V, 100A) 서버용 컴퓨터 전원장치의 프로토 타입 제작을 통한 실험결과로부터 제안된 회로의 동작특성과 타당성을 검증한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.171-174
• /
• 2004

The stochiometric $AgGaSe_2$ polycrystalline mixture of evaporating materials for the $AgGaSe_2$ single crystal thin film was prepared from horizontal furnace. To obtain the single crystal thin films, $AgGaSe_2$ mixed crystal and semi-insulating GaAs(100) wafer were used as source material and substrate for the Hot Wall Epitaxy (HWE) system, respectively. The source and substrate temperature were fixed at $630^{\circ}C$ and $420^{\circ}C$, respectively. The thickness of grown single crystal thin films is $2.1{\mu}m$. The single crystal thin films were investigated by photoluminescence and double crystal X-ray diffraction(DCXD) measurement. The carrier density and mobility of $AgGaSe_2$ single crystal thin films measured from Hall effect by van der Pauw method are $4.89{\times}10^{17}\;cm^{-3},\;129cm^2/V{\cdot}s$ at 293K, respectively. From the photocurrent spectrum by illumination of perpendicular light on the c - axis of the $AgGaSe_2$ single crystal thin film, we have found that the values of spin orbit splitting ${\Delta}S_o$ and the crystal field splitting ${\Delta}C_r$ were 0.1762 eV and 0.2494 eV at 10 K, respectively. From the photoluminescence measurement of $AgGaSe_2$ single crystal thin film, we observed free excition $(E_X)$ observable only in high quality crystal and neutral bound exciton $(D^o,X)$ having very strong peak intensity And, the full width at half maximum and binding energy of neutral donor bound excition were 8 meV and 14.1 meV, respectively. By Haynes rule, an activation energy of impurity was 141 meV.

• 대한전자공학회논문지
• /
• 제22권4호
• /
• pp.76-83
• /
• 1985

RMOS(refractory metal oxide semiconductor)의 게이트와 집적회로의 각 소자나 회로를 연결하는 연결선으로 사용되는 Mo2N/Mo 이중층을 Ar과 N2의 혼합가스 분위기에서 저온의 고주파 반응성스펏터링으로 형성하였다. 1000Å-Mo2N/4000Å-Mo이중층의 면저항은 약 1.20∼1.28Ω/구로서 다결정실리콘의 약 1/10정도가 되었다. C-V측정으로부터 Mo2N/Mo이중층과 비저항이 6∼9Ω·㎝이고 결정면이 (100)인 P형 Si과의 일함수차 f%5는 약 -0.30ev 및 산화층에 존재하는 고정전하밀도 Qss/q는 약 2.1x1011/cm를 얻었다. 인버터 한개당의 신호전달 지연시간을 측정하기 위해 다결정실리콘게이트 NMOS 제조공정을 웅용하여 45개의 인버터로 구성된 ring oscillator를 제작하였다. 본 실험에서 얻을 수 있었던 인버터 한개에 대한 신호전달지연시간은 약 0.8nsec였다.

• 대한전자공학회논문지
• /
• 제22권4호
• /
• pp.92-100
• /
• 1985

P형 Si기판에 N에피층을 성장시키고 Si-AR막 계면에서 고정양전하밀도(Qss)를 높임으로써 전지의 에미터 표면영역을 N'전하축적층으로 나타낸 새로운 형태의 N'N/P HLE 태':1전지 를 제 작하였다. 제작된 전지의 종류로는 AR막으로 SiOr층을 이용한 OCI전지와 Si,N,/sioxynitride층을 이응한 NCI전지로 구분하였다. 전지의 AR막내 Qss분포는 커패시턴스-전압 측정을 통해 조사하였으며 이로부터 NCI전 al (Qss=1.79~ 1.84$\times$1011cm-2) 가 OCI전 지 (Qss=3.03~ 4.40$\times$1011cm-1) 에 비 해 로면 전 하축 적 층 이 효과적 으로 나타남을 알 수 있었다. JCR할로겐 램프로 100mW/cm2의 인공조명을 만들어 효율특성을 분석한 결과 유효수광면적에 대한 평균(최대)변환효율이 OCI전지에서 15.18(15.46)%, NCI전지에서 16.31(17.07%)로 나타났다.

• 천문학회지
• /
• 제48권1호
• /
• pp.75-82
• /
• 2015

We use a volume-limited sample of quasars in the Sloan Digital Sky Survey (SDSS) DR7 quasar catalog to identify quasar groups and address their statistical significance. This quasar sample has a uniform selection function on the sky and nearly a maximum possible contiguous volume that can be drawn from the DR7 catalog. Quasar groups are identified by using the Friend-of-Friend algorithm with a set of fixed comoving linking lengths. We find that the richness distribution of the richest 100 quasar groups or the size distribution of the largest 100 groups are statistically equivalent with those of randomly-distributed points with the same number density and sky coverage when groups are identified with the linking length of $70h^{-1}Mpc$. It is shown that the large-scale structures like the huge Large Quasar Group (U1.27) reported by Clowes et al. (2013) can be found with high probability even if quasars have no physical clustering, and does not challenge the initially homogeneous cosmological models. Our results are statistically more reliable than those of Nadathur (2013), where the test was made only for the largest quasar group. It is shown that the linking length should be smaller than $50h^{-1}Mpc$ in order for the quasar groups identified in the DR7 catalog not to be dominated by associations of quasars grouped by chance. We present 20 richest quasar groups identified with the linking length of $70h^{-1}Mpc$ for further analyses.

• 대한의생명과학회지
• /
• 제16권4호
• /
• pp.365-376
• /
• 2010

The purpose of this study was to clarify the effect of light emitting diode (LED) irradiation on healing of impaired wound and alteration of mast cells in experimental diabetic rats. Twenty-four male Sprague-Dawley rats were divided into four groups: excision (Ex), excision-LED irradiation (Ex-LED), diabetes + excision (DM) and diabetes + excision + LED irradiation (DM-LED). Diabetes was induced in rats by streptozotocin (STZ) injection (70 mg/kg, single dose) and 6 mm punch excision wounds were created on the back after shaving hair. The LED-irradiated rats were treated to a daily dose of $5\;J/cm^2$ LED (630 nm) light for 11 days after surgery, and were killed at day 1, 3, 7 and 11. The lesion and adjacent skin tissues were excised, fixed with 10% buffered formalin and embedded with paraffin. For evaluation of wound healing, hematoxylin-eosin (HE) and Masson trichrome staining were performed. Mast cells (MCs) were stained with toluidine blue (pH 0.5) and quantified using a computerized image analysis system. The proliferation activity of keratinocyte in skin tissues was analyzed on sections immunostained with proliferative cell nuclear antigen (PCNA). The results showed that wound healing rate, collagen density and neo-epidermis length, number of PCNA-positive cells, fibroblasts and mast cells were significantly higher in the LED-irradiated rats than in the DM and Ex rats throughout the periods of experiment. Exceptionally, the number of MCs was significantly lower at day 11 compared with day 7 after surgery in the all groups. These findings suggest that the LED irradiation may promote the tissue repair process by accelerating keratinocyte and fibroblast proliferation and collagen production in normal rats as well as in diabetic rats, and MCs may play an important role at an early stage of skin wound healing in normal and diabetic rats.