• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.156-161
• /
• 2004

To predict the direction of the fatigue crack initiated from a hole under various types of biaxial fatigue loads with different phase difference and biaxiality, fatigue parameters were investigated. Axial and torsional biaxial fatigue loads were selected with the respective combination of five different phase differences of 0, 45, 90, 145 and 180 degrees and five biaxialities of 0, $1/{\sqrt{3}}$, 1, ${\sqrt{3}}$, ${\infty}$. Directions of the fatigue crack initiation around the hole were found to approach to the circumferential direction of the specimen with increment of the phase difference for fatigue tests with phase differences less than $90^{\circ}$. Whereas directions for tests with phase differences greater than $90^{\circ}$ went away from the circumferential direction and those were symmetric to the directions for tests with phase difference less than $90^{\circ}$. With increase of biaxilities, the fatigue crack initiated more apart from the circumferential direction of the specimen. These crack initiation direction were predicted using maximum tangential stress range and maximum shear stress range obtained at far-field and around the hole. Comparing these two stress parameters, The crack initiation direction can be successfully explained by using the direction of the maximum tangential stress range obtained around the hole and at far-field.

• 대한한의학원전학회지
• /
• 제23권1호
• /
• pp.1-10
• /
• 2010

Wi Syndrome(痿證) mainly occurs from fluid damages[津液損傷] caused by heat in Gi(氣) phase of the Five viscera, while it sometimes come from the outside. Although the symptoms are presented in the limbs, the disorder roots in the Five viscera, most deeply located in the human body, Therefore, to approach the disorder, we must apply differentiation of the Five viscera in diagnosis. The Lungs, as the head of the Five viscera control the production and distribution of bodily fluids in the body. Functional disorder of the Lungs bring about Wi Syndrome regardless of it being in the Gi phase. Also, psychological depression leads to Wi Syndrome, In other words, depression and uneasiness easily results in the state of Gi blocking and fluid exhaustion in this modern society where there is less manual labor and excessive use of the brain. Besides Gi blockage, the top muscle[宗筋] theory is another important mechanism in the occurrence of Wi Syndrome. Moreover, the disorder is related to Yangmyeong(陽明), which is the sea of food, Chungmaek(衝脈) which is the sea of meridian, in addition to Immaek(任脈), Dokmeak (督脈) and Deameak(帶脈) which are all involved in Wi Syndrome. In conclusion, the Wi Syndrome happens when various factors involved lose balance and harmony with each other.

• 동의생리병리학회지
• /
• 제25권2호
• /
• pp.359-364
• /
• 2011

The purpose of this research is to propose the range of five phases which need to be essentially included in the introductory course of Korean medicine, its significance and the relationship with applied subjects. The students in School of Korean Medicine participated in a survey to figure out the response rate and status of the five phases described in the textbooks. In the preparatory survey, 43 items in the phases were selected; in the main one, there were differences only in the response rate to respective items, not in the grade level. In addition, the survey for the present condition of the textbooks was conducted with six categories to see if there is description of the five phases. Based on the two results, the importance of 43 five phases items was classified into low, medium, and high levels. It is expected that the efficiency of education can be increased if 14 items included in high significance and 11 in medium, which are classified according to the findings of this study, must be instructed in the introductory course of Korean medicine, and if 18 items in low significance are used as reference materials.

• 공학교육연구
• /
• 제17권2호
• /
• pp.11-24
• /
• 2014

The purpose of this study is to develop a teaching-learning model of convergence project based on team teaching. Based on development research methodology which explored a university case, the teaching-learning model was developed including three phases such as preparation, planning, and implementation & evaluation. The preparation phase has three steps as follows: to organize team teaching faculty; to develop convergence projects cooperated by industry and university; and to design instructions based on supporting convergence projects. The last step of preparation phase consists of five design activities of: (1) instructions and teaching contents; (2) communication channel among faculty members; (3) feedback system on students' performance; (4) tools to support learners' activity; and (5) evaluation system. The planning phase has two steps to analyze learners and to introduce and modify instruction and themes of convergence projects. The implementation & evaluation phase includes five steps as bellow: (1) to organize project teams and match teams with faculty members; (2) to do team building and assign duties to students of a team; (3) to provide instruction and consulting to teams; (4) to help teams to conduct projects through creative problem solving; and (5) to design mid-term/final presentation and evaluation. Lastly, the research implications and limitations were discussed for future studies.

• 한국운동역학회지
• /
• 제28권3호
• /
• pp.151-158
• /
• 2018

Objective: In this study, we analyzed kinematic changes in the start phase of speed skating before and after physical training. Method: We introduced a new strength training program (2017) that was improved in terms of exercise type and intensity [%, one repetition maximum (1RM)] compared with the previous strength training program (2016). The new program was applied to elite speed skating athletes (four males and four females). To determine the improvement in starting technique, we recorded race images during the start phase of the 500-m race held in 2016 and 2017. The race images were collected using five high-speed cameras and kinematic characteristics of the start phase were analyzed by three-dimensional image analysis. Results: The 1RMs were improved by 11% on an average after the strength training. In 2017, records of four out of the eight athletes were shortened in terms of the initial lap time (100 m), and 500-m records were shortened in six athletes. The time to nine strokes was shortened in five athletes, and the ratio of correct kinetic chain was increased or maintained at a high level in six athletes. Conclusion: In this study, the new strength training program (2017), applied to elite speed skating athletes, showed a positive effect on starting technique and reduced the record times.

• PNF and Movement
• /
• 제21권1호
• /
• pp.11-18
• /
• 2023

Purpose: This study aims to compare the effects of obstacle walking training combined with cognitive tasks on balance, gait, and activities of daily living in patients with stroke. Methods: A single-subject design was used, where one stroke patient participated. Obstacle walking training combined with cognitive tasks was performed for 1 hour per day for a total of 10 times during the intervention phase. The subjects were measured five times in the baseline phase, 10 times in the intervention phase, and five times in the follow-up phase. The outcome measurements included the Berg balance scale (BBS), the 10-meter walk test (10 MWT), and the Korean modified Barthel index (K-MBI). Results: In this study, the results showed that the 10 MWT scores during the intervention period improved and that this improvement remained, even during the post-period. In addition, BBS and K-MBI values for stroke patients increased significantly after training. Conclusion: The results of this study revealed that obstacle walking training combined with cognitive task training may be helpful to improve balance, gait, and activities of daily living in stroke patients. Therefore, obstacle walking training combined with cognitive tasks is recommended for stroke patients.

• Journal of Korea Trade
• /
• 제24권6호
• /
• pp.82-100
• /
• 2020

Purpose - This paper attempts to compare five free trade agreements with gender chapters ratified by Chile and Canada and derives lessons for Korea in terms of gender-aware trade policy. While Chile and Canada have three and two FTAs with gender chapter respectively, Korea has none so far, although it has already ratified an FTA with the two countries. Design/methodology - This study first investigates all the gender-provisions with the gender chapters, conducts a comparative analysis on the five chapters as well as a case study of one target FTA's implementation and achievements, and finally suggests policy implications for Korea's trade administration as well as trade-related agencies. Findings - According to the analysis, there are three phases in terms of advancement in gender-related trade policy. As Chile is in phase two and Canada is in phase three, Korea remains in phase one. It has a ministry related to gender within the government, but not within the OMT. It has statistics on female business, but not of women traders. It has a few gender-related provisions in its FTAs, but not a gender chapter. In this sense, new mandates related to gender-aware trade policy for OMT, KITA, and KOTRA should be provided to realize the concrete economic benefits resulting from empowering women traders and policies promoting them. Originality/value - Existing studies only focus on introducing gender-related international commitments and Korea's participation in them. This paper is the first attempt to compare actual gender chapters of five FTAs ratified by two countries with the most advanced gender chapters in the world. To gain benefits from the positive gender impact of trade agreements, negotiating and signing gender responsive FTA with future partners is one of the most efficient, as well as inclusive, trade policies urgently needed for Korea.

• 품질경영학회지
• /
• 제37권3호
• /
• pp.83-93
• /
• 2009

This study proposes a stepwise approach to product safety management(PSM), of which roadmap consists of five phases. ISO 9001 QM model is assumed as the first-phase model and each higher-phase model is built by adding a corresponding module to the lower one. In the phase order, those modules are CCMS, a failure to warn, manufacturing defect and design defect. The progress in PSM of a domestic food company is discussed.

• Journal of electromagnetic engineering and science
• /
• 제9권3호
• /
• pp.159-163
• /
• 2009

This paper presents the design and implementation of Q-band MMIC phase shifters using InGaAs PIN diodes. The topology using a thin-film microstrip line(TFMS) has been proposed to achieve the desired phase-shift as well as good loss characteristics. Five single-bit MMIC phase shifters have been implemented by using a developed BCB(benzocyclobutene)-based multi-layer fabrication technology. The developed phase shifters have less than 3.4 dB of insertion loss and better than 11 dB of input and output return loss in the frequency range of 43 to 47 GHz. To the authors' knowledge, this is the first demonstration of high-performance InGaAs PIN diode-based MMIC phase shifters operating at Q-band frequencies.

• ETRI Journal
• /
• 제25권1호
• /
• pp.19-24
• /
• 2003

This paper describes the performance of a Ku-band 5-bit monolithic phase shifter with metal semiconductor field effect transistor (MESFET) switches and the implementation of a ceramic packaged phase shifter for phase array antennas. Using compensation resistors reduced the insertion loss variation of the phase shifter. Measurement of the 5-bit phase shifter with a monolithic microwave integrated circuit demonstrated a phase error of less than $7.5{\circ}$ root-mean-square (RMS) and an insertion loss variation of less than 0.9 dB RMS for 13 to 15 GHz. For all 32 states of the developed 5-bit phase shifter, the insertion losses were $8.2{\pm}1.4$dB, the input return losses were higher than 7.7 dB, and the output return losses were higher than 6.8 dB for 13 to 15 GHz. The chip size of the 5- bit monolithic phase shifter with a digital circuit for controlling all five bits was 2.35 mm ${\times}$1.65 mm. The packaged phase shifter demonstrated a phase error of less than $11.3{\circ}$ RMS, measured insertion losses of 12.2 ${\pm}$2.2 dB, and an insertion loss variation of 1.0 dB RMS for 13 to 15 GHz. For all 32 states, the input return losses were higher than 5.0 dB and the output return losses were higher than 6.2 dB for 13 to 15 GHz. The size of the packaged phase shifter was 7.20 mm${\times}$ 6.20 mm.