• 동력기계공학회지
• /
• 제18권1호
• /
• pp.22-31
• /
• 2014

This paper introduced the new calibration algorithm of a straight-type five-hole pressure probe necessary for calculating three-dimensional flow velocity components. The new velocity data reduction method using both a commercial two-dimensional curve-fitting program and the zone partition method of a calibration map was firstly introduced in this study. This new calibration method can be applied up to the wide flow angle of ${\pm}80^{\circ}$ despite of using a five-hole pressure probe because this data reduction method showed a comparatively good performance in calculating yaw and pitch angles from the calibration map.

• 한국멀티미디어학회논문지
• /
• 제21권9호
• /
• pp.1110-1118
• /
• 2018

Personal sound amplifiers(PSAPs) provide accessible and affordable healthcare to individuals with hearing disability. Many studies are in progress for affordable PSAP development, but still people do not have a best fitting profile for the PSAP depending on their hearing test. As a result, they do not have a personalized and profiled music and sound, which are very helpful for those who has hearing problems. In this paper, we propose a device and mobile system to provide music with an equalizer value according to the hearing condition of an individual to prevent the hearing loss. In order to overcome the limit of frequency band of the equalizer in a smart phone, we developed bluetooth controlled equalizer based on the fitting profiles.

• 천문학회보
• /
• 제39권1호
• /
• pp.36.2-36.2
• /
• 2014

We present results of the analysis of FLS 1718+59, a galaxy-galaxy gravitational lens system in the Spitzer First Look Survey (FLS) Field. A background galaxy (z = 0.245) is severely distorted by an elliptical galaxy (z = 0.08), by gravitational lensing. We analyze this system by several methods, including Ellipse and Galfit fitting, gravitational lens modeling (gravlens), and SED fitting. Properties of the lens galaxy can be obtained: from Galfit we measure the effective radius and the average surface brightness inside it, and from gravlens we estimate the total mass inside the Einstein radius (lensing mass). We use these parameters to check that the lens galaxy is located on the Fundamental Plane. Also, we conduct SED fitting for the lens galaxy and estimate the stellar mass, and compare this with the lensing mass of the lens galaxy to check the M-L relation.

• 전기학회논문지
• /
• 제62권7호
• /
• pp.913-917
• /
• 2013

During the restoration process of primary restorative transmission system, some over voltages may happen due to nonlinear interaction between unloaded transformers and transmission systems. These over voltages caused by harmonic resonance can be suppressed by inserting damping loads before energizing transformers. But it is very difficult to predict the occurrence possibility of harmonic resonance and complex simulation must be repeated to estimate the sufficient damping loads. This paper presents a damping loads prediction system to prevent harmonic resonance. Detailed analysis of the relationship between harmonic resonance and the amount of damping loads is discussed. The prediction system is developed using a curve fitting and a neural network based on this relationship. A curve fitting used a Gaussian function based on non-linear least square method and multi-layer back-propagation neural network is applied. The system is applied to primary restorative transmission lines in korean power system and the result showed satisfactory performance.

• 한국측량학회지
• /
• 제33권4호
• /
• pp.231-244
• /
• 2015

VLBI 안테나의 기준점을 정확하게 결정하는 것은 서로 다른 우주측지기술들을 연계하는 콜로케이션을 수행하기 위한 필수적인 사항이다. 본 연구에서는 VLBI 안테나의 기준점을 정확하게 산출할 수 있는 3D circle fitting 방법에 대한 비교와 분석을 수행하였다. 이를 위하여 평면상의 관측점 평행이동과 정규직교 좌표계 설정을 기반으로 하는 방법론과 unitary 좌표변환을 활용하는 방법론을 제시하고, 비교 대상 방법별로 fitting 정확도를 평가하였다. 각 방법의 3D circle fitting 정확도를 향상시키기 위하여 관측점과 fitting 모델 사이의 잔차로써 직교거리를 산출하고, 과대오차를 소거하는 반복계산 과정을 수행하였다. 연구의 결과, unitary 좌표변환을 기반으로 하는 3D circle fitting 방법론이 VLBI 안테나의 방위각과 앙각축에 대한 최적의 방정식을 결정하는데 가장 적합한 것으로 나타났다. 상기 방법으로 결정된 두 축의 교차점을 VLBI 안테나의 기준점으로써 계산하였고, 이러한 결과는 향후 VLBI 관측성과의 국가기준점 연계를 위한 다양한 연구에 활용될 수 있을 것으로 기대된다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제10권2호
• /
• pp.113-118
• /
• 2010

This paper proposed an ECAM (Electronic cam) control system which has simple and general structure. The proposed cam controller adopted the linear and polynomial curve-fitting method to generates a smooth cam profile curve function. Smooth motion trajectory of master actuator guarantees the good performance of slave motion and has an important effect on the interpolation quality of ECAM. The auto-tuning PID velocity controller was applied to overcome the uncertainties in ECAM, and the gains of the controller are updated continuously to ensure the consistency of system performance under varying working conditions. The robustness of system against the varying load torque disturbances and noises is guaranteed by using the load torque disturbance observer to suppress the disturbance on master actuator. The velocity compensator was applied to compensate the degradation of performance of slave motion caused from the varying driving speed of master motion. The stability and validity of the proposed ECAM control system was verified by simulation results.

• 센서학회지
• /
• 제9권6호
• /
• pp.440-447
• /
• 2000

본 논문에서는 곡선근사법과 뉴로퍼지 시스템의 열전도도 추론을 이용하여 대기온도의 변화에 관계없이 재질의 온도응답을 분류하기 위한 시스템을 제안한다. 재질의 온도응답은 정상상태에 도달하는데 장시간이 소요되며, 과도상태에서는 잡음을 포함하고 있기 때문에 실용화하는데 문제점이 있다. 제안하는 방법은 온도응답곡선의 과도상태만을 곡선근사법에 의해 지수함수화함으로써 단시간에 계측이 가능하고 측정중의 잡음을 없앨 수 있다. 뉴로퍼지 추론을 이용하여 임의의 대기온도 하에서 재질의 열전도도를 추론함으로써 열전도 특성의 복잡한 성질을 수학적으로 해석해야하는 문제점을 극복하였다. 이를 위해 인간의 손가락과 유사한 구조의 재질 온도응답센서를 제작하고, 하드웨어를 구현하였으며, 곡선근사화와 뉴로퍼지 알고리즘에 의한 분류 소프트웨어를 개발하였다.

• 한국광학회지
• /
• 제33권6호
• /
• pp.310-316
• /
• 2022

Presampled 변조전달함수(MTF) 측정에서 slant 표적각도 변화에 따라 MTF 결과의 차이가 있음을 확인하였고, 표적각도 변화에 대한 오차를 줄이기 위하여 획득한 edge spread function 그래프를 fitting하여 측정값의 오차를 줄일 수 있는 측정기법을 연구하였다. Presampled MTF 방법의 특성상 표적이 회전함에 따라 투영되는 공간주파수의 강도분포는 표적의 회전각도에 따라 변화하며, 이로 인하여 MTF 차이가 발생함을 확인하였다. 이 연구에서는 획득한 영상의 1개의 열에 대해서만 fitting을 한 후 MTF를 계산하였다. Fitting을 이용한 계산은 기존의 presampled MTF 방법과 비교하여 표적 회전에 따른 오차가 줄어듬을 확인하였다. 이 방법은 MTF를 이용한 자동 초점 등 다양한 각도의 표적에 응용이 가능할 것으로 기대된다.

• Transactions on Control, Automation and Systems Engineering
• /
• 제3권2호
• /
• pp.133-138
• /
• 2001

This paper describes a system that can used to recognize an unknown material regardless of the change of ambient tem-perature using temperature response curve fitting and fuzzy neural network(FNN). There are some problems to realize the recogni-tion system using temperature response. It requires too many memories to store the vast temperature response data and it has to be filtered to remove noise which occurs in experiment. And the temperature response is influenced by the change of ambient tempera-ture. So, this paper proposes a practical method using curve fitting the remove above problems of memories and nose. And FNN is propose to overcome the problem caused by the change of ambient temperature. Using the FNN which is learned by temperature responses on fixed ambient temperature and known thermal conductivity, the thermal conductivity of the material can be inferred on various ambient temperature. So the material can be recognized by the thermal conductivity.

• 복식문화연구
• /
• 제6권4호
• /
• pp.175-187
• /
• 1998

Hats are an important part of the fashion accessory business and Their importance is increasing year by year. Their importance is increasing not only as a means of accessory ut also as a means of sportswear due to the leisure-sports boom of the 90's. As hats are becoming more and more popular and ready-made, demand for comfortable and easy-fitting hats are increasing. Being an piece of apparel, fitting is very important factor in hats as well s in other forms of clothing. But many hat-wears complain of dissatisfaction of fitting of their hats. In addition to this, another problem is hat most hat designs have been flown in from the West without inspection of their fits. Designs to fit the Koran face and head have not been developed properly. This study is based on the need for the development of a well-fitting hat pattern design for Korean young women. After taking actual measurements of 170 young womens, a size system was organized for developing patterns for different size groups.