• Journal of Korea Multimedia Society
• /
• v.15 no.7
• /
• pp.941-950
• /
• 2012

A virtual garment fitting system which fits the top and bottom of a garment on 3D body data is introduced. This system uses the laser scanned 3D body data and the digital images photographed the front and back of a garment. The digital images are modeled to reflect tensions among particles in the images and the friction and gravity effects are considered in the fitting process to the body data. When a bottom is fitted, a virtual belt to hold the bottom in the waist is introduced since gravity effects pull down it. Also the process for fitting the top and bottom on layers is proposed here. The system has the strengths that it uses only the front and back image of a garment instead of using complicated patterns of a garment, and provides a realistic fit result as a 3D figure. As on-line retailing shop in present displays front and back images of garments, this system also does. However this system provides a differentiated service to user than present retailing shop as showing a 3D fit image. It will make a new trend in online shop retailing of garment.

• Journal of Korea Multimedia Society
• /
• v.3 no.5
• /
• pp.495-505
• /
• 2000

In this paper, we propose an efficient auto-fitting system for digital hearing-aids which automatically adjusts the fitting parameters according to the auditory characteristics of hearing handicapped person. The fitting parameters are extracted from audiogram of hearing handicapped and are applied to digital hearing-aid purposed GM3036 chip. The characteristics of each parameter are compared with those from theoretical 2cc graph. The purposed system has applied to 50 patients and their satisfaction ratios show to the very high. As results, it shows effectiveness of proposed system.

• Fashion & Textile Research Journal
• /
• v.14 no.6
• /
• pp.992-1000
• /
• 2012

This study develops a traditional green fabric pattern design through an apparel CAD system. The method used simulated stage costumes and evaluated the consumer satisfaction connected with a 3D fitting system. The results are as follows. Computerization of the pattern making process can provide higher accuracy and efficiency in apparel pattern making and marking for green fabrics. A Stage costumes design was developed; subsequently, the developed dress patterns are automatically depicted to the input of the body size of the consumer and marked using marking program. This results show that it has an effect on narrow and expensive green fabrics. Stage costumes design can make a simulation by a 3D Fitting system. The results of this study can provide higher consumer satisfaction through a survey of 30 consumers. Stage costumes should attract the sympathy of the spectators. The Acceptance of Andong region's traditional beauty is required. We found that a relationship of performance and clothes, physical functionality and beauty of costumes, possibility of commercialization, and the possible use of a 3D Fitting system use are evaluated. A continuous study of regional culture resources is required since there is a significant possibility for the long-term development of stage clothes.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.8
• /
• pp.1098-1103
• /
• 2014

This study deals with the development of an electrofusion welding machine that is capable of joining plastic pipes using a recently developed electrofusion fitting. This fitting has built-in conductive plastics that are used to weld the joint together as a heating element. In order to explain the mechanism of the new machine, 1) the resistance characteristics of the heating element were explained, 2) the method of electric welding that uses the electrofusion fitting was described, and 3) the method of power supply based on controlling the firing angle was explained. A control system for an intelligent electrofusion welding machine was proposed. This system has the ability to recognize the diameter of an electrofusion fitting using a lookup-table based on the difference of resistance curves according to fitting types, and it is able to weld the fittings regardless of the ambient temperature. A new algorithm was developed to control the power of electric welding through the recognition of feature points from the resistance curve of the heating element. In order to evaluate the performance of the developed welding machine, tests involving the welding of 16 mm- and 20 mm-type fittings were carried out. Examining the welding results, we concluded that the proposed welding machine will offer high productivity and reliability in the field of electrofusion welding.

• The Journal of Information Systems
• /
• v.31 no.1
• /
• pp.25-58
• /
• 2022

Purpose The purpose of this study is to analyzes the RPA fitting processes by the casese of manufacturing SMEs(Small and Medium-sized Enterprises) in an exploraty approach. Based on the findings on the RPA fitting processes, we intend to provide a cornerstone for developing a general-purpose RPA introduction model in the future. Design/methodology/approach In this study, empirical cases of RPA fitting processes were analyzed based on interviews with project managers of specialized IT suppliers in charge of RPA development and managers of IT departments of manufacturing SMEs that actually introduced RPA. In order to explore various RPA fitting process in the manufacturing value chain, a total of 7 manufacturing SMEs were interviewed, ranging from companies using a legacy system to companies without a legacy system. Over the primary and secondary activity processes, the details of RPA processes were analyzed in the steps of 'Frequency Identification, Input Processing, Source Identification, Inquiry and Processing, Information Registration, Result Reporting'. Findings From the analysis, we derived some exploratory results that the processes over 0.25 FTE and related with many suppliers and clients are fitting for RPA introduction in manufacturing SMEs Our results will provide basic data for the development of the future general-purpose RPA introduction model for manufacturing SMEs, providing practical reference for RPA introduction.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.415-418
• /
• 2005

DSP chip parameters of a digital hearing aid (HA) should be optimally selected or fitted for hearing impaired persons. The more precise parameter fitting guarantees the better compensation of the hearing loss (HL). Digital HAs adopt DSP chips for more precise fitting of various HL threshold curve patterns. A specific DSP chip such as Gennum GB3211 was designed and manufactured in order to match up to about 4.7 billion different possible HL cases with combination of 7 limited parameters. This paper deals with a digital HA fitting program which is developed for optimal fitting of GB3211 DSP chip parameters. The fitting program has completed feature from audiogram input to DSP chip interface. The compensation effects of the microphone and the receiver are also included. The paper shows some application examples.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1842-1847
• /
• 2007

In this study, we are to analyze the life and the main failure mode of flexible tubes fitting for pneumatic that are usually applied in the factory automation line. Flexible tubes fitting for pneumatic have complicated failure cause because they are organized as a complex of various elements. Therefore, in this paper, we analyzed the main failure mode of flexible tubes fitting for pneumatic, and then performed life test and performance test according to the international standards. On the basis of these processes, we estimate shape parameter that is the main factor for the calculation of test time for the reliability of flexible tubes fitting for pneumatic and their data analysis of life distribution.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.1
• /
• pp.191-203
• /
• 2016

The 3D virtual fitting system is a new and very efficient system replacing real fitting in apparel industry and on-line shopping. It is a win-win system for both of consumer and manufacturer which not only reduces design and production time but also resolves consumer's complaints by checking the wearing image beforehand. It is a must-have item in the future. The purpose of this study is to analyze sizing menu, terms, and current status and to figure out problems of avatar sizing programs which substitute human bodies in virtual fitting. We chose three existing outstanding programs in domestic and global market, compared and analyzed the program, manual, and terms that are used in avatar sizing, and investigated the strengths, weaknesses, problems of options and terms and finally suggested an alternative terms. The revealed problems are as follows: each program supports various avatars ranging from male to female, from child to adult, and from oriental style to western style. The image of the avatar could be changed through the options for hair style, shoes and accessories. But we found out some problems. The avatar body types are far from actual human body types, avatar sizing menus and item terms are different from program to program, and terms not yet standardized. Cooperative efforts of industry and academy on standardization of sizing menus and terms should be emphasized for the virtual fitting system to be widely used like the other computer graphic programs or word editors.

• Journal of Computational Design and Engineering
• /
• v.2 no.4
• /
• pp.218-232
• /
• 2015

Piecewise linear (G01-based) tool paths generated by CAM systems lack $G_1$ and $G_2$ continuity. The discontinuity causes vibration and unnecessary hesitation during machining. To ensure efficient high-speed machining, a method to improve the continuity of the tool paths is required, such as B-spline fitting that approximates G01 paths with B-spline curves. Conventional B-spline fitting approaches cannot be directly used for tool path B-spline fitting, because they have shortages such as numerical instability, lack of chord error constraint, and lack of assurance of a usable result. Progressive and Iterative Approximation for Least Squares (LSPIA) is an efficient method for data fitting that solves the numerical instability problem. However, it does not consider chord errors and needs more work to ensure ironclad results for commercial applications. In this paper, we use LSPIA method incorporating Energy term (ELSPIA) to avoid the numerical instability, and lower chord errors by using stretching energy term. We implement several algorithm improvements, including (1) an improved technique for initial control point determination over Dominant Point Method, (2) an algorithm that updates foot point parameters as needed, (3) analysis of the degrees of freedom of control points to insert new control points only when needed, (4) chord error refinement using a similar ELSPIA method with the above enhancements. The proposed approach can generate a shape-preserving B-spline curve. Experiments with data analysis and machining tests are presented for verification of quality and efficiency. Comparisons with other known solutions are included to evaluate the worthiness of the proposed solution.

• Korea Journal of Hospital Management
• /
• v.17 no.1
• /
• pp.59-78
• /
• 2012

The purpose of this study is to evaluate on the fitting with human resource practice and strategic on 6 public hospital in the point of resource based view. At the result of this study, public strategy is not much fitted into HRM(human resource management) system, but it shows positive result of the fitting with efficiency strategy and HRM system. These results were associated with the integration of G Medical Center. Generally 6 public hospitals of the HRM system and the strategy had not been linked. They also did not achieve a great outcome. We suggest that the manager in charge of each hospital make strategies of the hospital, and then evaluates about fitting with HRM system. We hope, hereafter, it applied the analysis methods that evaluates it with financing result and individual non-financial result all together.