• 소성∙가공
• /
• 제28권5호
• /
• pp.266-274
• /
• 2019

Metal sealing is used to connecting the parts between valves and fuel pipes for a FCEV which utilizes hydrogen gas of 700 bar. Instead of general carbon steel, stainless steel is the primary material used to manufacture fuel pipes due to hydrogen embrittlement. The shape of deformation between metals is an important factor on the air-tightness of the metal to metal contact. Since the stainless steel pipe is hardened using the plastic forming during the tip shaping stage, this work hardening could have an effect on the deformed shape and characteristics of contact surfaces in fastening of pipes. In this paper, the deformation history of the pipe model was considered in order to analyze the hydrogen-tightness on the metal sealing part. The contact distance and the forward displacement for fastening were compared using experimental results and the simulation results. The simulation of the effect of material change on the fitting body demonstrated that the hardness or the strength of the formed tip of the pipe was designed to a proper valued level since the characteristics of the contact surface was exhibited better when the strength of the pipe was lower than that of the fitting body.

• 한국정보통신학회논문지
• /
• 제22권1호
• /
• pp.33-39
• /
• 2018

질량 스펙트럼 분석 시스템을 위한 부가 잡음제거 알고리즘을 제안하였다. 측정된 이온 신호로부터 먼저 백색 가우시안 특성을 갖는 바닥 잡음의 제거를 위해 측정된 신호의 최빈값으로부터 추정된 임계값을 사용하였다. 또한 각각의 질량 지수에 해당하는 신호 블록을 구성하여 이 신호 블록에 대한 2차 커브 피팅 및 선형 근사를 수행한다. 이 과정에서 임펄스성 잡음과 정상적인 이온 신호로 보기에 불충분한 샘플 신호들을 제거함으로써 이온 신호만으로 구성된 유효 신호 블록을 재 구성할 수 있다. 이 유효 신호 블록에 대한 커브 피팅 곡선으로부터 잡음이 제거된 질량 스펙트럼을 얻을 수 있다. 제안한 방법의 성능평가를 위해 개발장비로부터 취득된 신호를 이용한 시뮬레이션을 수행하였다. 시뮬레이션 결과를 통해 최빈값으로부터 추정된 임계값 설정의 타당함과 제안한 커브 피팅 및 선형 근사기반 잡음제거 알고리즘의 우수성을 보였다.

• Communications for Statistical Applications and Methods
• /
• 제4권1호
• /
• pp.177-183
• /
• 1997

A data-adaptive order selection procedure is proposed for local polynomial nonparametric regression. For each given polynomial order, bias and variance are estimated and the adaptive polynomial order that has the smallest estimated mean squared error is selected locally at each location point. To estimate mean squared error, empirical bias estimate of Ruppert (1995) and local polynomial variance estimate of Ruppert, Wand, Wand, Holst and Hossjer (1995) are used. Since the proposed method does not require fitting polynomial model of order higher than the model order, it is simpler than the order selection method proposed by Fan and Gijbels (1995b).

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.511-514
• /
• 2003

This study was conducted to estimate the design rainfall by the determination of best fitting order for Higher Probability Weighted Moments of the annual maximum series according to consecutive duration at sixty-five rainfall stations in Korea. Design rainfalls were obtained by generalized extreme value distribution which was selected to be suitable distribution in 4 applied distributions and by L, L1, L2, L3 and L4-moment. The best fitting order for Higher Probability Weighted Moments was determined with the confidence analysis of estimated design rainfall.

• 반도체디스플레이기술학회지
• /
• 제9권1호
• /
• pp.11-16
• /
• 2010

Wafer Pre-Alignment is to find the center and the orientation of a wafer and to move the wafer to the desired position and orientation. In this paper, an area camera based pre-aligning method is presented that captures 8 wafer images regularly during 360 degrees rotation. From the images, wafer edge positions are extracted and used to estimate the wafer's center and orientation using least squares circle fitting. These data are utilized for the proper alignment of the wafer. For accurate alignments, camera calibration methods using high order polynomials are used for converting pixel coordinates into real-world coordinates. A complete pre-alignment system was constructed using mechanical and optical components and tested. Experimental results show that alignment of wafer center and orientation can be done with the standard deviation of 0.002 mm and 0.028 degree, respectively.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.2023-2030
• /
• 2022

A novel pulse fitting analysis (PFA) method is presented for the acquisition of nuclear spectra. The charging process of the feedback capacitor in the resistive feedback charge-sensitive preamplifier is equivalent to the impulsive pulse, and its impulse response function (IRF) can be obtained by non-linear fitting of the falling edge of the nuclear pulse. The integral of the IRF excluding the baseline represents the energy deposition of the particles in the detector. In addition, since the non-linear fitting process in PFA method is difficult to achieve in the conventional architecture of spectroscopy system, a new multi-channel analyzer (MCA) based on Zynq SoC is proposed, which transmits all the data of nuclear pulses from the programmable logic (PL) to the processing system (PS) by high-speed AXI-Stream in order to implement PFA method with precision. The linearity of new MCA has been tested. The spectrum of ¹³⁷Cs was obtained using LaBr₃(Ce) scintillator detector, and was compared with commercial MCA by ORTEC. The results of tests indicate that the MCA based on PFA method has the same performance as the commercial MCA based on pulse height analysis (PHA) method and excellent linearity for γ-rays with different energies, which infers that PFA method is an effective and promising method for the acquisition of spectra. Furthermore, it provides a new solution for nuclear pulse processing algorithms involving regression and iterative processes.

• 한국컴퓨터정보학회논문지
• /
• 제28권5호
• /
• pp.83-93
• /
• 2023

본 연구는 자전거에 의한 통증 및 부상의 원인과 종류 자전거피팅을 통한 통증 및 부상을 개선하고 재활방법을 제안하는 것을 목적으로 한다. 자전거에 의한 통증 및 부상은 크게 무릎, 발목부위 통증, 손목, 어깨, 목, 허리부위 통증, 엉덩이 통증으로 나눌 수 있다. 이러한 통증 및 부상의 원인은 잘못된 자전거피팅과 자세에서 비롯된다. 이러한 통증 및 부상을 개선하고 재발을 방지하기 위해서는 적절한 자전거피팅과 재활운동이 필요하다. 통증 및 부상은 운동성 통증과 고정된 자세에 의한 통증으로 나뉘며 운동성 통증의 경우 염증치료와 함께 재활운동이 필요하고 고정된 자세에 의한 통증은 정확한 신체의 특징을 이해하고 신체의 특징에 맞는 자전거 자세를 학습하고 연습해야 한다. 이런 방법을 통해 자전거 통증 및 부상의 재발을 예방하고 나아가 안전한 자전거 문화를 정립할 수 있는 환경을 조성하는데 이바지할 수 있다.

• 한국지반신소재학회논문집
• /
• 제15권1호
• /
• pp.1-10
• /
• 2016

최근 해상풍력발전 단지 조성은 많은 양의 에너지를 창출할 수 있어 그 기대는 점차적으로 증가하고 있다. 특히 제주도는 풍황이 우수하여 해상풍력발전 시스템 운영을 위한 최적의 대상지이기는 하나, 화산활동에 의해 형성된 지형으로 육지부와 달리 현무암층 사이에 연약층인 화산쇄설물 및 공동이 불규칙하게 발달된 층상구조로 이루어져 있다. 이에 본 연구에서는 제주현무암의 p-y 곡선을 얻기 위한 수평재하시험을 실시하였다. 말뚝 수평재하시험중에 측정한 변형률 데이터로부터 p-y 곡선을 유도하기 위하여 수평변위(y)는 high order polynomial curve fitting 기법을 적용하고, 지반반력(p)은 piecewise cubic polynomial curve fitting 기법을 추천한다. 이는 지반반력을 계산하기 위하여 미분하는 과정에서 발생하는 에러를 최소화 할 수 있으므로 역해석을 통한 말뚝두부에서 하중-변위를 예측할 때 에러가 가장 작게 발생한다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2002년도 학술발표회 발표논문집
• /
• pp.233-236
• /
• 2002

This study was conducted to estimate the design flood by the determination of best fitting order for LH-moments of the annual maximum series at fifteen watersheds. Parameters of GEV distribution and flood flows of return period n years were derived by the methods of L, L1, L2, L3 and L4-moments. Frequency analysis of flood flow data generated by Monte Carlo simulation was performed by the methods of L, L1, L2, L3 and L4-moments using GEV distribution. Relative Root Mean Square Error (RRMSE), Relative Bias (RBIAS) and Relative Efficiency (RE) using methods of L, L1, L2, L3 and L4-moments for GEV distribution were computed and compared with those resulting from Monte Carlo simulation. At almost all of the watersheds, the more the order of LH-moments and the return periods increased, the more RE became, while the less RRMSE and RBIAS became. Consequently, design floods for the applied watersheds were derived by the methods of L3 and L4-moments among LH-moments in view of high confidence efficiency.

• 한국의류산업학회지
• /
• 제11권2호
• /
• pp.308-314
• /
• 2009

In creating an avatar, consumers can find out for themselves their own sizes to be entered. Also, putting in a face creation main-page menu option enables clients to make up their faces and match them to their bodies. Through this process when purchasing clothes through the internet consumers can enter their own body sizes and create avatars that are identical to their body shape. The uniqueness of developed prototype is that it creates an avatar similar to one's body shape according to body size inputs and demonstrates visually to customers the on-line comfort test which was only available off-line traditionally. The avatar follows the movement of mouse from left to right which enables 3 dimensional visualization. Through maximizing the visual effect this research focuses on enabling consumers to feel subjective parts as if they are off-line. This study seeks to provide a type of prototype of an online shopping mall that meets the demand of the consumers using the 3D avatar.