• 해양환경안전학회지
• /
• 제24권2호
• /
• pp.267-274
• /
• 2018

연 근해어선들은 운항 또는 조업시 안정성(복원성능 및 횡동요 저감 성능)을 향상시키기 위해 여러 가지 부가물을 설치하며, 일반적으로 Fig. 1과 같이 세 가지로 분류할 수 있다. Bare hull을 포함하여 각 부가물이 단독으로 부착된 경우 3가지, 복수의 조합으로 부착된 경우 3가지 그리고 3가지 모두 부착된 1가지에 대하여 수치 계산을 수행하였다. Table 1은 Bare hull에 대한 주요치수를 나타낸 것이고, Table 2는 3가지 부가물에 대한 주요치수를 기술하였다. 3가지 선체 부가물에 대하여 CFD에 의한 유체동역학적 성능을 평가하였다. 각각의 부가물에 대하여 단독, 2개씩 조합된 복수 그리고 3개 모두 부착된 경우에 대하여 평가를 하였다. 1번 부가물의 경우 압력저항이 마찰저항보다 차지하는 비율이 큼을 알 수 있었다. 2번과 3번 부가물의 경우 압력저항과 마찰저항이 거의 대동소이 함을 알 수 있었다. 복수조합과 3가지 모두 부착된 경우 부가물 상호간의 상관관계는 매우 작음을 알 수 있었다. 11노트에서 2번 부가물과 모든 부가물이 부착된 경우 유효마력 관점에서 약 9 % 차이를 보였다.

• 수산해양기술연구
• /
• 제27권4호
• /
• pp.247-254
• /
• 1991

1982~88년 사이 한국건착망 어업의 망선 48척의 어황일보에 의한 조업해구, 어종별 어획량의 자료를 이용하여 5개 해역별로 어획량의 특성을 분석하였다. 이들 해역중 제주도 연안해역(CC)은 양망회수와 어획량은 많으나 양망당어획량이 타해역보다 적으므로, 조업중 어구의 형상에 대해 계측한 자료를 이용하여 저층류에 의한 망형변화에 대해 분석한 결과를 요약하면 다음과 같다. 1. 건착망의 평균 CPUE는 31.6톤인데 음 10~4월은 평균보다 높고, 음 5~9월은 낮았다. 2. 건착망 어장 5개 해역중 CC해역은 양망회수비 42.4%로서 가장 높고 CPUE는 25.7톤으로 낮았으며, 각 해역별 CPUE는 1%의 유의수준에서 차가 인정되었다. 3. 고등어 CPUE의 계절변동지수는 음 11~1월에 평균 136.3%였고, 음 5~10월에 평균 63.7%였다. 4. 저층류에 의한 역조시 선망권의 직경은 가장 짧았고, 이때 납줄에 의한 포위면적은 더욱 좁아지며 어군의 포위효율은 낮아졌다. 5. 저층류에 의한 납줄의 형상은, 순조의 경우 유향으로 장원형이 되었고, 역조의 경우 유향과 직교되는 방향으로 장원형이 되면서 포위면적이 급히 축소되었으며, 망의 변형은 역조의 경우 가장 심하였다.

• 수산해양교육연구
• /
• 제21권1호
• /
• pp.68-77
• /
• 2009

In this study it will be discussed how to solve the problem of discomfort from rolling motion on the small fishing boats. Up to now, the equipments of reducing rolling system can be examined by various case, but difficult to apply small vessel by function, space and costly establishment. A way of improving the feeling of getting on a boat through the equipped sail at stern edge of bulwark top was researched and developed. The author has tested the sailing performance of the experimental skiff boat, from the signals obtained by the inclinometer in irregular waves and compared with the results got in sail on and off mode operation for 10 minutes duration at the conditions of stop and underway. These data has been analyzed in the application statistical methods. Eventually we summarize the analyzed results obtained from the vessel while stationary and underway for two cases, the vessel with a sail and the vessel without a sail. The field test was done in Jeju outer harbor. The ratio of the motion responses at resonance for the sail with and without cases indicate that under given conditions the motion was reduced by the efficiency of diminution is 4.726%, 2.792% in the stopping and 11.663%, 3.282% in the underway and mean rolling periods are 2.158, 2.142, 2.421, 2.412sec. and 1.968, 1.963, 2.089, 2.051sec. respectively. Consequently the efficiency of diminution was higher when the ship is underway and rolling periods got longer in the equipped sail.

• 동력기계공학회지
• /
• 제21권2호
• /
• pp.64-69
• /
• 2017

The purpose of this study is to investigate the performance characteristics of seawater cooling system for a fishing vessel. The circulation amount of refrigerant, condensation capacity, evaporation capacity, compression work and coefficient of performance(COP) were analyzed as the heat source temperature changed. The experimental setup consisted of an open-type compressor, a shell&tube type condenser, an evaporator and an expansion valve. The heat source was controlled by a constant temperature chamber. The main results of this study are summarized as follows. The condensation capacity increased with increasing heat source temperature, and it was confirmed that the effect of circulating amount of refrigerant was dominant. The amount of heat for vaporization was almost constant even though the temperature of the heat source increased. On the other hand, the compression power was increased. This is because the compression ratio increases as the condensation pressure, the enthalpy difference between inlet and outlet, the amount of circulating refrigerant increases. The performance coefficient of this system showed a tendency decreasing with increasing heat source temperature. Therefore, the basic data of the seawater cooling system for the maintenance of the catch line of the shore fishing boats was acquired through this study, and it is considered that it will be sufficient for the actual design.

• 수산해양기술연구
• /
• 제57권4호
• /
• pp.292-301
• /
• 2021

Interviews and boarding surveys were conducted in order to understand the actual usage of octopus pot in the coastal composite fishery in Jeollanam-do. According to the results of the interviews conduced by visiting the areas (Goheung, Yeosu and Wando), the number of octopus pots per nine-ton vessel were 30,000-80,000, and the number of daily usage pots were 7,000-10,000. The number of octopus pots per four-ton vessel was 40,000, and the number of daily usage pots were 4,000. As a result of the survey on two octopus pot fishing boats (9.77-ton and 4.99-ton) in Yeosu area, the daily catch weight of 9-ton class vessel was the minimum of 66.9 kg and the maximum of 159.6 kg. The daily catch weight of the four-ton class fishing vessel was from 31.3 kg to maximum 85.6 kg. The average number of octopus pot used per day in the nine-ton class vessel was 6,821 (the minimum of 6,031 and the maximum of 7,697) and 3,181 (the minimum of 2,282 and the maximum of 3,878) in the four-ton class vessel.

• 수산해양기술연구
• /
• 제36권4호
• /
• pp.299-308
• /
• 2000

기선권현망 어구를 대폭적으로 줄이여 어획 성능을 향상시킨 어구를 개량하고 자동화 조업시스템을 개발하기 위하여 현재 사용중인 어구를 1/2로 축소 제작한 시험어구를 가지고 양선간격과 예망속도의 변화에 따른 해상실험을 통하여 어구 각부의 망고와 수중형상을 측정$.$분석한 결과를 요약하면 다음과 같다. 1. 시험어구 각 부분의 망고는 양선간격과 예망 속도가 증가함에 따라 낮아지는 경향을 보였다. 2. 시험어구 A의 양선간격에 따른 오비기, 수비, 앞창, 자루 입구, 깔때기와 자루 뒤끝의 망고는 각각 10.8∼9.0, 12.0∼8.3, 12.6∼9.0, 10.4∼6.6, 4.6∼5.2, 8.8∼7.7m이었고, 각 부분의 전개율은 각각 36∼30, 21∼15, 31∼22, 80∼51, 80∼96, 59∼5l%로 나타났다. 3. 시험어구 B의 양선간격에 따른 오비기, 수비, 앞창, 자루 입구, 깔때기와 자루 뒤끝의 망고는 각각 9.1∼8.5, 9.8∼6.5, 11.2∼8.0, 11.0∼8.1, 4.7∼5.0, 7.0∼7.5m이었고, 각 부분의 전개율은 각각 30∼28, 18∼12, 27∼20, 85∼62, 87∼93, 47∼50%로 나타나 자루 입구와 깔대기 부분에서는 시험어구 A보다 다소 전개가 양호하였으나 다른 부분에서 약간 불량하였다. 4. 시험어구 A, B의 예망속도에 따른 각 부분의 망고는 양선간격에서와 거의 같았으나 변화폭은 다소 작았다. 5. 오비기와 수비 부분의 전개율이 30%정도로 매우 작기 때문에 포켓현상이 뚜렷하게 나타났다. 6. 모형어구 A의 수중형상은 양선간격과 예망속도가 증가에 따라 뒤 부분이 들리는 경향을 보인 반면에 시험어구 B는 거의 일정하였다. 7. 시험어구 A와 B의 예망깊이는 양선간격과 예망속도가 증가함에 따라 약간씩 얕아지는 현상을 보였는데, 뜸줄 쪽보다는 발줄 쪽이 뚜렷하다.

• Strategy21
• /
• 통권33호
• /
• pp.178-201
• /
• 2014

China National People's Congress has passed the bill to combine the Marine Law Enforcement into "State Oceanic Administration People's Republic of China". This bill was intended to resolve the overlapping jurisdiction and disputes caused in ocean territory in nearby countries. The purpose of reorganizing the administration was to combine the dispersed organization into one group. This new big administration was basically organized to increase the power of China marine state on the long-term. The reorganization plan is to group General Administration of Customs, China Marine Surveillance, Fisheries Law Enforcement Command, and Border Control Department into one State Oceanic Administration. The new state Oceanic Administration carries the authority to protect rights and enforce the marine law supported by Public Security Bureau. Korea Coast Guard has been cooperating with China Marine Surveillance since 1998 when the first pact was made. The next step expanded to General Administration of Customs. Currently working with Regional Maritime Law Enforcement organizations dealing mostly with illegal Chinese fishing boats and IEODO conflict. In order to solve the problems we face today is to observe the process of the New China Coast Guard administration, analysing the effects that could be caused by the change and to keep close cooperation between the new administrations.

• 해양환경안전학회지
• /
• 제10권2호
• /
• pp.49-53
• /
• 2004

본 논문에서는 양식어장을 보호하기 위한 어장 탐지 시스템의 개발에 대해 논의한다. 어장탐지시스템(FDS)은 어장에 침입하는 도적선박을 실시간으로 식별하고 어장의 위치변동 둥을 파악하는 기능을 갖는다. 본 연구에서는 어장에 접근하는 물체탐지 및 적아식별을 위해 저가이면서 대역의 레이더 응답기능을 갖는 어장작업선용 AIS(F-AIS)를 개발하여 소형어선 등의 식별기능에 이용하고자 한다.

• 수산해양교육연구
• /
• 제27권1호
• /
• pp.49-62
• /
• 2015

As methods reducing damages by jellyfish which enter the coastal areas of Korea, attaching cutting devices to towing nets of otter trawls or pair trawls and/or using a canvas type of cutting nets of small fishing boats have been widely utilized. In order to reduce shut-down damages of power plants in coastal areas due to the mass influx of marine organisms including jellyfish, a possible improvement of the traveling water screen system and various jellyfish influx blocking devices were suggested in this study. The results could be utilized as an important index for reducing damages by jellyfish bloom which cause on a massive scale in summer in Korea.

• 소음진동
• /
• 제6권4호
• /
• pp.503-511
• /
• 1996

There is a tendency of using the resilient mounting system to control the structure born noise transimitted from a engine of which weight is comparatively light and of which speed is comparatively high. According to recent reports, the resilient mounting system is applied to control the vibration of a engine running up to 300 - 400 R.P.M.. Furthermore, the resilient system is also used to the ships such as marine exploring ships, fishing boats, and military vessels. It is not desirous to apply the results for the resilient mounting systems of automobile engines to the controls of the vibrations of marine engines. Marine engines are worked under the idle speed in port and are operated up to the maximum contineous revolution at sea(running up condition). And marine engines are usually worked in inevitable conditions such as a misfire and a cut-off cylinder operating condition. Concerning the above running conditions, a resilient mounting system should be designed in the case of marine engines. In this paper, we studied the effect of engine's misfire on the resilient mounting systems. And the influences of design parameters, such as dynamic characteristics and fitting angles of resilient rubber mountings, were also investigated respectively on the single and double resilient mounting systems.