• Journal of the Korean Society of Safety
• /
• v.35 no.3
• /
• pp.105-115
• /
• 2020

This study compares the difference of fit factors (FF) and visual acuity according to masks and eyeglasses preferences for 54 participants. We the precautions and behaviors of discomfort when wearing masks of eyewear wearers. Contact lens discomfort and priority action of complaints was investigated Glasses fitting factors is Optical Center Height(OH), Vertex Distance(VD) and Pantoscopic Angle(PA). We measured those factors and expressed by the ratio of standard point and change point. Quantitative fit factor was measured by Portacount Pro+ 8038. Also, we selected to 6 exercises among 8 exercises OSHA QNFT (Quantitative Fit testing) protocol to measure the fit factors. The pass/ fail criterion of FF was set at 100. Visual acuity(VA) test chart is developed by Chunsuk Han was used, Descriptive statistics was performed. Descriptive statistics(SAS ver 9.2), it is used geometric means, Wilcoxon analysis(P=0.05) When wearing the mask preferentially, fit factor(FF) was high according to the step of glasses fitting parameter. on the other hand, when the glasses first choice, the visual acuity(VA) was high. there was no significant difference. In the case of fit factor (FF), mask first choice/ glasses first choice is OH (p=0.671/ p=0.332), VD (p=0.602/ p=0.571) and PA (p=0.549/ p=0.607). Visual acuity (VA), mask first choice/ glasses first choice is OH (p=0.753/ p=0.386), VD (p=0.815/ p=0.557) and PA (p=0.856/ p=0.562). The workers of workplace and office chose glasses but occupational health workers and students chose mask. In case of discomforts, it was suggested to remove the mask and tolerate discomforts. The main discomforts and usual action of lens were dryness, hyperemia, foreign body sensation, ophthalmodynia, decreased vision and glasses wearing. Therefore, it is necessary to develop a mask wearing method education program considering glasses fitting and develop a hybrid model that minimizes inconvenience when wearing glasses and a mask at the same time.

• Journal of Fashion Business
• /
• v.16 no.4
• /
• pp.46-63
• /
• 2012

This research purposed to the conceptual model with integrates the expanded task technology fit theory(TTF) and technical acceptance model(TAM) for the effect of the motivational factor of the consumer characteristics in the used the fashion mobile commerce. To fulfill the study objectives, a total of 432 questionnaires were conducted to the customers with first-hand experience with merchandise in mobile commerce. The judgement sampling method was employed on sample population ages from 20s to 30s over two month period. Based on the results of the above-mentioned path analysis, The result showed that First, the utilization experience was adopted as the have the notes effect in the and information acquisition fit, support fit, quality fit, perceived ease of use. and the innovativeness was adopted as the have the notes effect in the information support fit, perceived trust, perceived ease of use. and the self-efficacy was adopted as the have the notes effect in the and information quality fit, perceived usefulness, perceived ease of use. Second, the information acquisition fit, support fit were adopted as the have the notes effect in the perceived trust, perceived usefulness, perceived ease of use. and the information quality fit was adopted as the have the notes effect in the perceived trust, perceived usefulness. Third, the appeared similar effect which considers from all relationships such as perceived trust, perceived usefulness, perceived ease of use, acceptance attitude and purchase intention.

• Journal of Korea Multimedia Society
• /
• v.19 no.2
• /
• pp.443-450
• /
• 2016

This paper deals with a kind of packing problem of which the goal is to compose one or more templates which will be used to produce the items of different types. Each template consists of a fixed number of slots which are assigned to the different types of items and the production of the items is accomplished by printing the template repeatedly. The objective is to minimize the total number of produced items. This problem is known to be NP-hard. We present a polynomial time approximation algorithm which has a constant approximation ratio. The proposed algorithm is based on the well-known first-fit strategy.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.2
• /
• pp.88-96
• /
• 2013

The objective of this research was to evaluate the suitability of sigmoidal and firstorder kinetic equations for simulating the methane production from solid wastes. The sigmoidal kinetic equations used were modified Gompertz and Logistic equations. Statistical criteria used to evaluate equation performance were analysis of goodness-of-fit (Residual sum of squares, Root mean squared error and Akaike's Information Criterion). Akaike's Information Criterion (AIC) was employed to compare goodness-of-fit of equations with same and different numbers of parameters. RSS and RMSE were decreased for first-order kinetic equation with lag-phase time, compared to the first-order kinetic equation without lag-phase time. However, first-order kinetic equations had relatively higher AIC than the sigmoidal kinetic equations. It seemed that the sigmoidal kinetic equations had better goodness-of-fit than the first-order kinetic equations in order to simulate the methane production.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.2
• /
• pp.176-186
• /
• 1996

The fit of a respirator to the face of an individual can be determined by a qualitative fit test (QLFT) or a quantitative fit test (QNFT). The pass/fail decision from a QLFT or QNFT for the same respirator on the same individual may vary from one wearing to the next, because the human facial features are complex and the respirator may not fit to the face in the same way every time it is worn. This study reports how the fit factors (FF) resulting from a QNFT on an individual vary from day to day and depend on the movements in the six fit test exercises. The reported FFs provide an objective and numerical basis (FF) which does not depend on the subject's voluntary or involuntary response. Four half-mask (H1-H4) and four full-facepiece respirators (F1-F4) were fit tested on one wearer 10 times a day for 5 days with a PortaCount (model 8010, TSI). The FFs obtained for each set of 10 fit tests on a specific day and 50 fit tests on five days involving one of the six exercise regimes have been recorded as log-normal distributions. All of the geometric standard deviations (GSD) of the overall FFs varied widely among every wearing and day except for H1 and F3, and the variability of the half-mask respirators was larger than that of the full-facepiece respirators. Among the six exercise regimes, reading or talking (RT) had markedly the lowest exercise FFs on the tested individual. Generally, there were significant differences between the first normal breathing (NB1) FFs and the remaining exercise FFs.

• Journal of the Korean Society of Safety
• /
• v.33 no.1
• /
• pp.47-53
• /
• 2018

This study compares the interrelation of fit factor(FF) and visual acuity test by the order of wearing preference between Particulate filtering face piece respirators(PFFR) and glasses for 54 participants. Glasses fitting factors is Optical Center Height(OH), Vertex Distance(VD) and Pantoscopic Angle(PA) or Visual acuity. We measured those factors and expressed by the ratio of standard point and change point. Quantitative fit factor was measured by Portacount Pro+ 8038 and compared the result of preference of wearing order between respirators and glasses. Also, we selected to 6 exercises among 8 exercises OSHA QNFT (Quantitative Fit testing) protocol to measure the fit factors. The pass/ fail criterion of FF was set at 100. Visual acuity test chart is developed by Chunsuk Han was used, Descriptive statistics was performed. Descriptive statistics(SAS ver 9.2), it is used geometric means, Wilcoxon analysis, peason correlation(P=0.05) Fit factor was increased when the respirator was worn before wearing the glasses(p=0.000) and decreased for visual acuity(p=0.000) The negative correlation was showed between OH and Overall fit factor(r=-0.409, p=0.002). Among 54 participants, 11 participants(20.3%) were worn respirator before wearing glasses and 1 participant(1.9%) was worn glasses before wearing respirator. The overall fit test showed the higher level was investigated for the group of participants wearing respirator before wearing glasses in 6 exercises. Also, overall fit factor were increased when participants wore glasses prior to respirator(16.6) to respirator prior to glasses(36.6). Visual acuity were increased when participants wore respirator prior to glasses(93.8) to glasses prior to respirator(106.0). Finally, comparison result of overall fit factor and visual acuity were glasses first choice from mask first choice. The results showed that higher overall fit factor was investigate when the participants wore the respirator prior to glassess at all. The results implied that it is important to maintain the overall fit factor and visual acuity according to the consideration of OH for glasses fitting when worker wore respirator and glasses at the same time.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.69
• /
• pp.23-35
• /
• 2001

This paper attempts to identify the relationship between the business model and its financial performance through the construct of business paradigm, fit which may be defined as the congruence between the customer needs (the demand side) and the firm competence( supply side) to meet them, Each business model\`s business paradigm fit reflects how well the technology that business model has taken is interconnected with market. Basically, the business paradigm fit consists of two parts, product fit dealing with the product(s) to meet the customer needs well and process fit focusing on producing and/or providing that product(s) at the lowest costs. For empirical tasting the business paradigm fit matrix and the measures for them were developed and the data about 73 companies as sample were collects with questionnaires. The findings are: First business paradigm fit can be used as a strong empirical indicator for the firm performance, Second. balance fit in product or process gives to the most desirable outcomes and no fit brings about the worst ones. Third the over fit(the case of doing more excessive innovative efforts than to be needed) shows much better outcomes than the under fit(the case of doing less innovative efforts) Fourth, this paper shows where, in what situation, and what type of innovation has to be taken for firm success at firm level, whereas Schumpeter(1934) already indicated the importance of innovation for economic growth at the economy /industry level. However, further study should be done later with more refined measures and expanded sample data.

• Journal of Korean society of Dental Hygiene
• /
• v.13 no.2
• /
• pp.361-368
• /
• 2013

Objectives : The purpose of this in vitro study was to evaluate the effect of firing cycles on the marginal and internal fit of metal ceramic crown. Methods : Ten same cases of stone models (abutment teeth 11) were manufactured. Ten cobalt-chrome cores were made per each models and the marginal and internal fit was evaluated through a silicone replica technique. The marginal and internal fit of specimens was measured twice. The first measurement was done after manufacturing cobalt-chrome alloy core and the second measurement was done after porcelain firing. T-test of paired sample for statistical analysis was executed with SPSS 12.0K for Windows (${\alpha}$=0.05). Results : Mean(SD) marginal and internal fit were 77.1(23.3) ${\mu}m$ for the cobalt-chrome alloy core group and 84.4(21.9) ${\mu}m$ for the metal-ceramic crown group. They were statistically significant differences between groups for marginal and internal fit (p<.05). Conclusions : All metal ceramic crowns showed marginal and internal fit ranged within the current clinical recommendations.

• The Journal of Information Systems
• /
• v.16 no.1
• /
• pp.179-200
• /
• 2007

In this research, we study how task and KMS fit influences on KMS performance in large corporations during its practical use. Based on the task-technology fit theory and information system success model, we developed a research model by considering the characteristics of KMS for supporting tasks. We try to verify how individual traits, task traits, and KMS Units affect task-KMS fit and how task KMS fit influences on KMS performance. We surveyed 212 employees who were using KMS and working for the large-sized manufacturing firms. We analyzed the collected data from LISREL 8.54 for Windows, and found the following significant results. First user satisfaction is increased when KMS provides knowledge to help to perform task rather than KMS' functionality. Second, user satisfaction is increased when KMS is suitable for performing task Hence, we verified task-KMS fit is an antecedent of user satisfaction. Third, task-KMS fit and user satisfaction have significant impacts on KMS performance. And user satisfaction affected more heavily on KMS performance than task-KMS fit did. As a result, we realized an individual performance can be improved when task KMS fit is high and, consequently, user satisfaction is increased. Forth while the usefulness of task-KMS fit is demonstrated, causal factors such as individual traits, task traits, and KMS traits significantly affect task-KMS fit. Formalization and knowledge trait we significant in enhancing user satisfaction, but KMS self-efficacy, autonomy, md system trait are not. These results indicate that task-KMS fit variable is useful as a measure of KMS performance as well as that of user satisfaction. Based on these results, we conclude that when KMS supports task activity, performance can be significantly improved by coordinating the task with KMS.

• The Research Journal of the Costume Culture
• /
• v.22 no.2
• /
• pp.209-224
• /
• 2014

This study aims to compare the ease of shirt patterns in the men's wear market that have been constantly developing, and to analyze the fitness and appearance through the 3D virtual try-on system. The study selected three industrial patterns and two educational materials of classic-fit and slim-fit shirts for a total of ten items. The experiments involved virtual wearing, a stress contact point perspective map, and appearance evaluations. First, the ease differed significantly in the chest, waist, and sleeve cap height according to the patterns. Second, based on the stress, contact point, and transparency, there was ease in the order of Nam, D-brand, J-brand, Park, and S-brand in the classic-fit shirts while the order of D-brand, Nam, J-brand, Park, and S-brand resulted in the slim-fit shirts. Third, in the appearance evaluation, higher points resulted in the order of J-brand, Park, S-brand, D-brand, and Nam in both classic-fit and slim-fit. The results showed that proper ease differs greatly by shirt-fit and target age. Also, the shirts with more ease tended to be evaluated less favorably in the appearance evaluation. Based on the results, the study suggests that the proper ease in chest circumference is 18cm for the classic-fit shirts and 6 cm for the slim-fit shirts.