Kim, Chong-Myeong;Jeon, Jin-Hun;Lee, Jae-jun;Kim, Ji-Hwan;Kim, Woong-Chul
Journal of Technologic Dentistry
/
v.38
no.2
/
pp.57-62
/
2016
Purpose: The purpose of this study was to assess precision of crown prostheses that were fabricated by using 2 kinds of bur or 3 kinds of bur. Methods: The crowns were fabricated by using the first molar of the right maxillary in this study. The abutments that were prepared were scanned by using a scanner and designed by using CAD software. Based on the crown design, NC data were created with CAM software. The created NC data were used while fabricating the crown prostheses by using 5-axis milling machine. Scanning was done for the internal and external surface of the completed crown prostheses and 3-dimensional measurement was conducted for precision assessment. Results: The $RMS{\pm}SD$ value for the external surface of the crown prostheses that was fabricated by using two burs and three burs were $28.5{\pm}4.1{\mu}m$ and $19.1{\pm}2.8{\mu}m$, respectively; and the value for two burs were bigger than that for three burs with statistical significance (p<0.001). The $RMS{\pm}SD$ value for the internal surface of the crown prostheses that was fabricated by using two burs and three burs were $14.9{\pm}1.9{\mu}m$ and $13.3{\pm}2.5{\mu}m$, respectively; and the value for two burs were bigger than that for three burs but with no statistical significance. Conclusion: Based on this study, the prostheses that were fabricated by using 3 bur presented better stability compared to those that were fabricated by using 2 bur and statistically significant difference was found only in the external surface.
To AC impedance study was performed in this study on the interfacial reaction between organic electrolyte and amorphous tungsten oxides thin film, cathodically coloring oxide, prepared by e-beam evaporation method in the 1 M $LiClO_4/PC$ organic solution. The electrochemical reactions at the interface were analyzed by the transient method and the complex impedance spectroscopy. The impedance spectrums showed that the electro-chemical intercalation of lithium cations was consisted of the following three steps; the first step, the charge transfer reaction of lithium cation at the interface between amorphous tungsten oxides thin film and the organic electrolyte, the second step, the adsorption of lithium atom on the surface of amorphous tungsten oxides thin film, and then the third step, the absorption and the diffusion of lithium atom into amorphous tungsten oxides thin layer. The bleaching and the coloring characteristics of amorphous tungsten oxides thin film were explained in terms of thermodynamic and kinetic variables, the simulated $R_{ct},\;C_{dl},\;D$ and $\sigma_{Li}$ by CNLS fitting method. Especially it was found that the limiting values of electrochromic reaction were the molar ratio of lithium, y=0.167 and the electrode potential, E=2.245 V (vs. Li).
The author obtained some useful information for the class III treatment from long term observation on the growing patients with class III malocclusion. 8 patients were selected for this study and presentation. From these observation so far my conclusions might be as follows: First in the early correction of the anterior crossbite, considerable forward growth changes were observed in the maxilla Second, as for the growth modification of jaws by orthopedic treatment only limited effects were recognized from the long-term observation Thrid, at early age of patients with anterior crossbite, any data couldn't make me predict the stability after treatment on the long-term basis. Fortunately, however, genial angle showed a marginal possibility of it prediction. Fourth, at an advanced age/ retraction orthopedic force on the mandible and the rapid change in the mandibular position may cause some trouble in the T.M.joint. Finally, the followings are recommendable. As for the anterior crossbite, correct it early as possible, and use orthopedic force under the age of ten. Do not enter the phase II treatment directly. Just wait and observe until the growth were almost completed, focusiong on some important factors such as airway problem, tongue position, and third molar development. Of course, these factors may have some effects on the mandibular growth. for the female, at the age of around 14 years old and the male, around 17 years old, make a final decision whether the patients will continue to be treated orthodontically or surgically Thereby, (I think) the relapse and retreatment problem after treatemnt we have observed so far might be minimized. Furthermore, the active treatment time may be also reduced.
The purposes of this study were to observe the compensation pattern of human female adults with openbite tendency and to provide the decision criteria of the diagnosis and treatment planning for those patients. Fifty patients with anterior openbite and fifty-five Patients without anterior openbite patients were selected as a control and a test group. ODI of the all patients was below 66. Mean ages of the control and the test group were 23.88 ${\pm}$ 4.53 and 24.7 ${\pm}$ 6.20 years, respectively. Lateral cephalograms were taken and forty-one variables were measured. To identify the morphological differences between the groups, statistical analyses were performed. Statistically significant differences were found in the measured variables of lower face height, N-Me, ANS-Me, ANS-Me/N-Me ratio, Mx1-SN, Mx1-FH, Mx1-NA(mm), Mx1-APo, PP to Mx6, Mn1-NB(degree), Mn1-NB(mm). The test group showed decreased lower face height, N-Me, ANS-Me, ANS-Me/N-Me ratio, more uprighted and retruded maxillo-mandibular incisors. Overeruption of the maxillary first molar was found in the control group.
Objective: The aim of this study was to compare the initial lateral cephalometric characteristics in two groups of patients: those that had mandibular setback surgery only and those that had mandibular setback surgery with advancement genioplasty. Methods: The lateral cephalograms of thirty-one patients were studied. Twenty-one Class III patients (group A) had only madibular setback surgery Twelve Class III patients (group B) had mandibular setback surgery with advancement genioplasty. Results: Differences between two groups were found in N-Me, ANS-Me, Occlusal Plane angle, Palatal Plane to U1, Mandibular Plane to L1, Mandibular Plane to L6, SN to U1, Sn-Stms, and Pog' projection. Compared to group A, group B showed more linguoversion and extrusion of upper incisors, more extrusion of lower incisors and lower first molar, and more steepness of the occlusal plane. N-Me, ANS-Me, and Sn-Stms were also longer in group B. But Pog' projection was shorter than group A. Conclusion: We conclude that certain initial lateral cephalometric characteristics may help indicate the inclusion of advancement genioplasty when mandibular setback surgery is planned in skeletal Class III patients.
Kim Woo-Young;Kim Yung-Soo;Jang Kyung-Soo;Kim Chang-Whe
The Journal of Korean Academy of Prosthodontics
/
v.39
no.5
/
pp.463-476
/
2001
Since the treatment of edentulous patients with osseointegrated implant was first introduced more than 30 years ago, implant therapy has become one of the most important dental treatment modalities today. Based on the previous experience and knowledge, $Br{\aa}nemark\;Novum^{(R)}$ protocol was introduced with the concept of simplifying surgical and prosthetic technique and reducing healing time recently. This protocol recommends the installation of three 5mm wide diameter futures in anterior mandible and the prefabricated titanium bars for superstructure fabrication. This study was designed to analyze the stress distribution at fixture and superstructure area according to changes of fixture number, diameter and superstructure materials. Four 3-dimensional finite element models were fabricated. Model 1 - 5 standard fixtures (13mm long and 3.75mm in diameter) & superstructure consisted of type IV gold alloy and resin Model 2- 3 wide diameter fixtures (13mm long and 5.0mm in diameter) & superstructure consisted of type IV gold alloy and resin Model 3-3 wide diameter fixtures (13mm long and 5.0mm in diameter) & superstructure consisted of titanium and resin Model 4-3 wide diameter fixtures (13mm long and 5.0mm in diameter) & superstructure consisted of titanium and porcelain A 150N occlusal force was applied on the 1st molar of each model in 3 directions - vertical($90^{\circ}$), horizontal($0^{\circ}$) and oblique($120^{\circ}$). After analyzing the stresses and displacements, following results were obtained. 1. There were no significant difference in stress distribution among experimental models. 2. Model 2, 3, 4 showed less amount of compressive stress than that of model 1. However, tensile stress was similar. 3. Veneer material with a high modulus of elasticity demonstrated less stress accumulation in the superstructure. Within the limites of this study, $Br{\aa}nemark\;Novum^{(R)}$ protocol demonstrated comparable biomechanical properties to conventional protocol.
Journal of the korean academy of Pediatric Dentistry
/
v.33
no.1
/
pp.35-42
/
2006
The developmental process of a tooth is being presented as an important study subject to analyze formation of normal dental arch and tooth. The purpose of this study was to see the formation of tooth from a tooth bud transplanted in a white rat regarding that the jawbone could be used as a new donor site of a trasplant. The first molar of a matured white rat was extracted and the tooth bud of a 13.5 day rat embryo was transplanted. The histological and radiographical results after 4 and 8 weeks respectively are as the following. 1. Calcification in dentin, cementum, pulp and periodontal ligament was formed from the tooth bud transplanted in the alveolar socket. 2. The development of hard and soft tissue was delayed compared to the normal tooth formation and abnormal histologic features such as ankylosis and osteodentin were found. 3. The formed hard tissue did not erupt into the jaw within 8 weeks.
Journal of Dental Rehabilitation and Applied Science
/
v.29
no.4
/
pp.418-425
/
2013
This case report describes about recurrent herpetic stomatitis mimicking post-root resection complication. A 49 year-old male patient was diagnosed vertical root fracture of the mesiobuccal root of his left maxillary first molar (#26). The mesiobuccal root was resected following root canal treatment of the same tooth. 19 months later, the patient presented with pain on left hard palate after a barbecue party. Intra oral examination revealed a gum boil-like blister at the hard palate corresponding to the apex of the palatal root of #26. On clinical examination, there was bleeding on probing and the periodontal pocket depth was measured less than 5 mm with no tooth mobility. On a periapical radiograph, periodontal ligament space widening was observed. Tracing the sinus tract with gutta percha cone was attempted, however, it was impossible. Extending the field of vision, small multiple round ulcerations were observed at the palate front which caused pain to the patient. Therefore, the pain was considered a non odontogenic and the patient was referred to the department of oral medicine. The patient was diagnosed recurrent herpetic stomatitis and after 3 days of antiviral medication, the pain and ulceration were subsided.
A diketo-type ligand was synthesized by the Knoevenagel condensation reaction of thiophene-2-aldehyde with acetylacetone, subsequently its transition metal complexes with Cu(II), Ni(II), and Co(II) chlorides were also prepared. All the complexes were characterized by various physico-chemical methods. The molar conductivity data reveals ionic nature for the complexes. The electronic spectrum and the EPR values suggest square planar geometry for the Cu(II) ion. Interaction of the Cu(II) complex with CTDNA (calf thymus DNA) was studied by absorption spectral method and cyclic voltammetry. The $k_{obs}$ values versus [DNA] gave a linear plot suggesting psuedo-first order reaction kinetics. The cyclic voltammogram of the Cu(II) complex reveals a quasi-reversible wave attributed to Cu(II)/Cu(I) redox couple for one electron transfer with $E_{1/2}$ values -0.240 V and -0.194 V. respectively. On addition of CTDNA, there is a shift in the $E_{1/2}$ values 168 mV and 18 mV respectively and decrease in Ep values. The shift in $E_{1/2}$ values in the presence of CTDNA suggests strong binding of Cu(II) complex to the CTDNA.
Park, Kyung-Kyu;Shin, Sung-Wook;Oh, Min-Ji;Lee, Sang-Ho
Elastomers and Composites
/
v.46
no.1
/
pp.37-44
/
2011
Effect of organo nanoclay (Cloisite 30B) on the polyesterification of adipic acid (AA) with diethylene glycol(DEG) was investigated with p-toluene sulfonic acid (p-TSA) (Br${\phi}$nsted acid) and butylchlorotin dihydroxide (Lewis acid) catalyst at 383 and 423 K. The initial [OH]/[COOH] molar ratio was two and the concentration of the catalysts in the reactants was 0.14 mol% based on the total reactants. The kinetics of the polyesterification was interpreted with the conversion data that was calculated from the acid values of the reactant-product mixture. The reaction rate of the polyesterification, which was catalyzed with p-TSA, exhibited the second-order dependency on AA concentration. When Butylchlorotin dihydroxide was used, the reaction rate revealed the first-order dependency on AA concentration. The activation energy of the reactions catalyzed with p-TSA and Butylchlorotin dihydroxide were calculated at 42.2 and 63.8 kJ/mol, respectively. Addition of 5 wt% Cloisite 30B to the reactant significantly diminished the activity of p-TSA, so the reaction rate decreased and the activation energy was calculated at 72.9 kJ/mol. Butylchlorotin dihydroxide catalyst maintained its activity regardless of the addition of Cloisite 30B to the reactant and the activation energy was calculated to 61.8 kJ/mol. Lewis acid catalyst, butylchlorotin dihydroxide, was more effective than Br${\phi}$nsted acid catalyst for the esterification of AA with DEG.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.