• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.130-135
• /
• 2010

Ectopic eruption is caused by an abnormal direction of eruptive path, most common in maxillary first molar, mandibular lateral incisor, and maxillary canine, and sometimes mandibular first molar. Ectopic eruption of first molar leads to abnormal root resorption of second deciduous molar, which, if left untreated, could cause premature loss of second deciduous molar; mesial tilting and rotation of first permanent molar; lack of space for eruption of second premolar; and occlusal problems. Therefore early treatment is advised when diagnosed as ectopic eruption. Treatment of ectopic eruption in the first permanent molar involves providing proper guidance for the direction of eruption using interproximal wedging and distal tipping methods while preserving second deciduous molar. This case report shows satisfactory results of the ectopic eruption of mandibular first molars in young patients who were treated with Humphrey appliance and Halterman appliance.

• Imaging Science in Dentistry
• /
• v.44 no.4
• /
• pp.273-278
• /
• 2014

Purpose: This study was performed to investigate the course of the mandibular canal on panoramic radiography and the visibility of this canal on both panoramic radiography and cone-beam computed tomography (CBCT). Materials and Methods: The study consisted of panoramic radiographs and CBCT images from 262 patients. The course of the mandibular canal, as seen in panoramic radiographs, was classified into four types: linear, elliptical, spoon-shaped, and turning curves. The visibility of this canal from the first to the third molar region was evaluated by visually determining whether the mandibular canal was clearly visible, probably visible, or invisible. The visibihlity of the canal on panoramic radiographs was compared with that on CBCT images. Results: Elliptical curves were most frequently observed along the course of the mandibular canal. The percentage of clearly visible mandibular canals was the highest among the spoon-shaped curves and the lowest among the linear curves. On panoramic radiographs, invisible mandibular canals were found in 22.7% of the examined sites in the first molar region, 11.8% in the second molar region, and 1.3% in the third molar region. On CBCT cross-sectional images, the mandibular canal was invisible in 8.2% of the examined sites in the first molar region, 5.7% in the second molar region, and 0.2% in the third molar region. Conclusion: The visibility of this canal was lower in the first molar region than in the third molar region. The mandibular canal presented better visibility on CBCT images than on panoramic radiographs.

• Restorative Dentistry and Endodontics
• /
• v.45 no.4
• /
• pp.46.1-46.8
• /
• 2020

Objectives: This study aimed to investigate the incidence and location of the second mesiobuccal root (MB2) canal in maxillary molars with the aid of various measuring points and lines using cone-beam computed tomography (CT). Materials and Methods: A total of 205 images of patients who underwent cone-beam CT examinations between 2011 and 2015 as part of their dental diagnosis and treatment were included. There were 76 images of the maxillary first molar and 135 images of the maxillary second molar. Canal orifices were detected at -1 mm from the top of the pulpal floor on cone-beam CT images. Image assessment was performed by 2 observers in reformatted image planes using software. Assessments included measurement of the distance between the MB1 and MB2 canals, and the angles between the lines connecting the MB1-MB2 and distobuccal (DB)-palatal (P) canals. The data were analyzed using the student's t-test. Results: The prevalence of the MB2 canal was 86.8% in the first molar and 28.9% in the second molar. The angle between the lines connecting the MB1-MB2 and DB-P canals was 2.3° ± 5.7° in the first molar and -3.95° ± 7.73° in the second molar. The distance between the MB1 and MB2 canals was 2.1 ± 0.44 mm in the first molar and 1.98 ± 0.42 mm in the second molar. Conclusions: The angles between the lines connecting the MB1-MB2 and DB-P canals was almost parallel. These findings may aid in the prediction of the location of the MB2 canal orifice.

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.2
• /
• pp.147-160
• /
• 1991

The purpose of this study was to examine, by the method of finite element analysis, how implant geometry with or without connection between natural tooth and osseointegrated abutments affected the stress distribution in surrounding bone and osseointegrated prosthesis. The mandibular first and second molars were removed and the two osseointegrated implants were placed in the first and second molar sites. Stress analysis induced by prostheses with connection(Model A)or without connection(Model B) between natural tooth(second bicuspid) and two osseointegrated abutments(first molar and second molar) was performed under vertical point load(Load P1) or distributed point load(Load P2). The results were as follows; 1. Under vertical point load, mesial tilting was shown in both Model A and Model B and inferior displacement of Model A was greater than that of Model B in the second bicuspid. 2. Under vortical point load, the first and second molars showed mesial tilting in both Model A and Model B, and inferior displacement of them was similar in Model A and Model B and was less than that of the second bicuspid. 3. Under distributed point load, mesial displacement was shown in Model A and Model B and inferior displacement of Model A was less than that of Model B in the second bicuspid. 4. Under distributed point load, mesial tilting was shown and inferior displacement of Model A was similar to that of Model B in the first and second molars. 5. In Model A under vertical point load, high stress was concentrated in the corneal portion of first molar and distributed throughout the second molar and the second bicuspid, and the stress distribution of the second molar was greater than that of the second bicuspid. 6. In Model B under vertical point load, high stress was concentrated in the coronal and mesio-cervical portion of the first molar. 7. In Model A under distributed point load, high stress was concentrated in the mesio-cervical portion of the first molar and evenly distributed throughout the second molar and the second bicuspid. 8. In Model B under distributed point load, high stress was concentrated in the disto-cervical portion of the second bicuspid and evenly distributed throughout the first and second molars.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.4
• /
• pp.556-562
• /
• 2009

Ectopic eruption of the maxillary first permanent molar means that the molar erupts out of the normal position and is arrested in its eruption by the second primary molar. This local eruption disturbance results in a premature atypical resorption on the distal part of the second primary molar. In most irreversible cases, the second primary molar is lost prematurely, either by spontaneous exfoliation or by extraction, In cases of doubt as to whether the eruption is of the irreversible type or not, careful radiographic observation period for a few months would be valuable in evaluating the possibilities of the tooth's freeing itself. The purpose of this study was to determine the characteristics and occurrence of the ectopic eruption of the maxillary first permanent molar. A descriptive, observational, retrospective study was done using the radiographs of 25 conseutive patients, who were in the first phase of mixed dentition. A method was designed to evaluate the amount of pathologic resorption of the second maxillary primary molar and the mesial angulation of the first permanent molar. The study showed that the most important etiologic factor was the eruption path or mesial angulation of the first permanent molars relative the chosen reference lines.

• The korean journal of orthodontics
• /
• v.35 no.3 s.110
• /
• pp.227-237
• /
• 2005

Eruptive disturbance of the permanent lower first molar is an uncommon condition caused by physical barriers on the eruption path or failure of the eruptive mechanism. Once eruptive disturbance of the permanent lower first molar is diagnosed. treatment should be started as soon as possible to establish a normal eruption pathway and to avoid any detrimental effects on the developing occlusion A case of primary retention of the mandibular first permanent molar treated with operculectomy and forced eruption which showed good treatment results and stability is described

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.1
• /
• pp.167-174
• /
• 2008

Mandibular first molar and primary molars usually have two roots, on the mesial and distal sides. Occasionally, these molars have an extra root located in the distolingual aspect. Prevalence of the 3-rooted first permanent molar shows ethnic variation, ranging from about 3% in Caucasian to about 20% in Mongoloid group, which includes Chinese, Japanese, Eskimo, American and Canadian Indians. The frequency of the mandibular molar with three roots decreases in the order of the first permanent molar, the second primary molar, and the first primary molar. If the mandibular first or second primary molar has an additional distolingual root, the adjacent molars, including the first permanent molar, posterior to it also may have it. Coronal morphologic change can occur in the mandibular first primary molars with three roots: the crown had more triangular-shape compared to the one with two roots, possibly affected by the presence of additional distolingual root. Clinically, exact diagnosis and treatment should be taken with those teeth for pulp canal treatment, extraction, and SS Cr.

• Journal of Korean Dental Science
• /
• v.15 no.2
• /
• pp.181-189
• /
• 2022

Molar incisor malformation (MIM) has been introduced as a new type of dental anomaly. Currently, the morphological and histological characteristics of MIM are known; however, its etiology has not been clearly identified. To date, the long-term prognosis of first permanent molars (FPM) affected by MIM has rarely been reported, and few treatment guidelines have been established. The purpose of this case report was to present guidelines for the extraction of FPM affected by MIM, depending on the presence of the third molar. In patients with a third molar, spontaneous mesial shift of the posterior molars might be induced by extracting the FPM at an appropriate time, that is, when the second permanent molar is at an early furcation stage of the tooth. However, it is recommended that FPM be preserved for as long as possible if a third molar does not exist. When an FPM needs to be extracted, it is suggested to consider space maintenance.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.5
• /
• pp.341-347
• /
• 2002

This study was designed to determine the location of the mandibular canal on lower molar areas. Thirty-three patients were examined with multi-planar reformatted CT scan($Dentascan^{(R)}$). Three kinds of measurements were performed. The first was the distances between the upper border of the mandibular canal and the root apices of the first and second molars, the second was the distance between the cortical plate of the mandible and mandibular canal, and the last was the location of the mandibular canal in the buccolingual plane. The obtained results are as follows 1. The distance between the root apices of lower molars and the superior border of mandibular canal was largest at the mesial root of the first molar, and shortest at the distal root of the second molar(p<0.05). 2. The longest distance between the outer surface of the buccal cortical plate of the mandible and mandibular canal was measured from the distal root of the second molar, and this distance decrease gradually mesially(p<0.05). 3. The distance between the mandibular base and inferior border of mandibular canal was longest at the distal root of the second molar, and shortest at the mesial root of the first molar(p<0.05). 4. The location of mandibular canal was lingually positioned in relation to the axis of teeth and alveolar ridge in molar areas.

• Journal of Oral Medicine and Pain
• /
• v.25 no.2
• /
• pp.205-214
• /
• 2000

This study was performed to investigate the relationship between mandibular midline shift and anteroposterior first molar occlusal relation, and their effects on the mandibular height and the occlusal plane angle. For this study, 49 patients with temporomandibular disorders were selected. They did not show facial asymmetry and their facial midline coincide with maxillary dental midline. Upper and lower mandibular impression were taken and the casts were fabricated. Amount and direction of the mandibular midline shift and the anteroposterior shift between the two occluding first molars were measured on the casts. Several items related to height such as mandibular height from top of the articular surface of the condyle to curve changing point between antegonial notch and mandibular angle, condylar height which was the vertical distance from the articular surface to retroepicondyle of the condyle, and sigmoid height from the deepest point of sigmoid notch to the curve changing point and the occlusal plane angle were also measured on the panoramic and on the transcranial radiographs. Correlation between midline shift and anteroposterior first molar relation and comparison between right and left mandibular height by the midline shift and the first molar relation were analysed by SPSS windows program. The results of this study were as follows : 1. Mean amount of midline shift in the subjects with midline shift were 2.0mm for both side, respectively. The first molar relation of the ipsilateral side of midline shift showed Angle class II tendency and the contralateral side showed Angle class III tendency, which meant drift of the dentition to the side of the midline shift. 2. The occlusal plane angle on the panoramic radiograph were $13.0^{\circ}$ in right, and $12.5^{\circ}$ in left side, and their were no correlation between occlusal plane angle and mandibular midline shift and the first molar occlusal relation. 3. Angle's classification for both sides of the first molar relation were same in about half of all the subjects. Amount of deviation from class I first molar relation, however, were decreased in the contralateral side of observed side. 4. Mandibular height of the ipsilateral side to which mandibular midline shift showed tendency of lower than that of the contralateral side, and there was a tendency that the height was higher in class III subjects, then class II subjects, and lower in class I subjects. However, condylar height did not show any difference in the subjects with midline shift and also show no difference by the first molar occlusal relation.