• 디지털산업정보학회논문지
• /
• 제5권1호
• /
• pp.99-105
• /
• 2009

Recently the research is much interested in about the inspection system using by computer vision system. In this paper, we deal with shape inspection technique for moving to be long and narrow object on conveyor belt. first, we are acquired for moving object on conveyor belt. then the object segmentation is using by color information for background and object. the object position be calculated by horizontal and a vertical histogram. second, we are checked for two hole in front part, widths and top/bottom side information in middle part, and finally checking for two holes in rear part. The performance of our proposed model is evaluated by experiments, within error of 1㎜, and can be checking to 17 object /min.

• 한국강구조학회 논문집
• /
• 제10권4호통권37호
• /
• pp.741-748
• /
• 1998

콘크리트충전 강관기둥-보 강접합부의 역학적 특성을 규명하기 위하여 모델 시험체에 대한 반복가력 실험을 행하였다. 실험변수로는 항복부위, 내부다이어프램의 유공의 크기 및 슬래브 설치 유무이다. 보 항복형 시험체인 경우에는 다이어프램 항복형 시험체에 비하여 충강성이 높고 내력의 저하없이 높은 층간변형을 가지고 있다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.448-451
• /
• 2003

This study describes a new maskless nano-fabrication technique of Si (100) using the combination of nanometer-scale mechanical forming by nano-indenter XP and KOH wet etching. First the surface of a Si (100) specimen was machined by using the nano-machining system, which utilizes the mechanism of the nano-indenter XP. Next, the specimen was etched by KOH solution. After the etching process, the convex structure or deeper hole is made because of masking or promotion effect of the affected layer generated by nano-machining. On the basis of this interesting fact, some sample structures were fabricated.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 추계학술발표대회 개요집
• /
• pp.150-152
• /
• 2004

This study was aimed at evaluation of residual stress of steel pipe structures. The production process of pipes was complex (at first bending was done by roll forming or press forming and welding was final process of making of steel pipes). So there could be effected high residual stresses in steel pipes. In order to evaluate the changes of residual stress the locations of measurement were selected carefully. Measurements of residual stress were done for various kinds of pipes (shapes in circular and square). For the evaluation of residual stress, hole-drilling method (ASTM E837 was applied. The results showed that along the weld Eine high tensile stress were measured as effected, and high tensile stresses were measured where large plastic deformation developed. Through these efforts, experimental results could be more effectively assisted by numerical method.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 1999년도 추계공동학술대회 논문집:21세기지식경영과 정보기술
• /
• pp.493-505
• /
• 1999

줌렌즈 카메라 보정은 매우 중요하고 적어도 두 가지 면에서 어려운 문제이다. 첫 번째는 실시간의 변화에 따라 카메라 내부 파라미터의 보정이고 두번째는 단일 렌즈 시스템의 핀홀모델은 줌렌즈시스템이 바로 적용하기가 어렵다. 그래서 이 논문에서는 이러한 문제의 일부분을 렌즈의 굴절현상, 초점 거리의 보정과 모델링, 확대에 관한 중요한 원리들뿐만 아니라 실제적으로 유용한 부분들을 기술하였다. 컴퓨터에 의해 제어되는 줌, 초점, 그리고 구경들의 실험결과가 제시되어있다.

• Journal of Electrical Engineering and Technology
• /
• 제6권2호
• /
• pp.280-283
• /
• 2011

In the present work, a new approach is proposed for via interconnects of semiconductor devices, where multi-wall carbon nanotubes (MWCNTs) are used instead of conventional metals. In order to implement a selective growth of carbon nanotubes (CNTs) for via interconnect, the buried catalyst method is selected which is the most compatible with semiconductor processes. The cobalt catalyst for CNT growth is pre-deposited before via hole patterning, and to achieve the via etch stop on the thin catalyst layer (ca. 3nm), a novel 2-step etch scheme is designed; the first step is a conventional oxide etch while the second step chemically etches the silicon nitride layer to lower the damage of the catalyst layer. The results show that the 2-step etch scheme is a feasible candidate for the realization of CNT interconnects in conventional semiconductor devices.

• Journal of Electrical Engineering and Technology
• /
• 제6권2호
• /
• pp.233-238
• /
• 2011

In the present work, a new approach is proposed for via interconnects of semiconductor devices, where multi-wall carbon nanotubes (MWCNTs) are used instead of conventional metals. In order to implement a selective growth of carbon nanotubes (CNTs) for via interconnect, the buried catalyst method is selected which is the most compatible with semiconductor processes. The cobalt catalyst for CNT growth is pre-deposited before via hole patterning, and to achieve the via etch stop on the thin catalyst layer (ca. 3nm), a novel 2-step etch scheme is designed; the first step is a conventional oxide etch while the second step chemically etches the silicon nitride layer to lower the damage of the catalyst layer. The results show that the 2-step etch scheme is a feasible candidate for the realization of CNT interconnects in conventional semiconductor devices.

• International Journal of Precision Engineering and Manufacturing
• /
• 제1권1호
• /
• pp.152-159
• /
• 2000

In piercing operation for small hole in very thin plate, micro burrs are formed. The micro burr is very difficult to remove because the thin plate is to be deformed during deburring and deteriorate accuracy. As a first step to remove the micro burrs effectively, the burr must be measured accurately as much as possible. For most micro burrs are so small as less than 10$\mu\textrm{m}$, it is very difficult to measure. Several methods are reviewed to measure the micro burr formed in piercing operation from very thin plate with thickness less than 0.1mm. Also the effective deburring methods are reviewed. Barreling ultrasonic and chemical deburring methods are performed and the results are compared.

• 한국CDE학회논문집
• /
• 제4권2호
• /
• pp.153-161
• /
• 1999

An atomatic mesh generation scheme with unstructured quadrilateral elements on trimmed surfaces has been developed. Trimmed surfaces are often encountered in modeling of structures with complex shapes such as aircrafts, automobile structures, pressure vessels and etc. For unstructured mesh generation with quadrilateral elements, a domain decomposition algorithm employing loop operators has been used. Mesh generation on trimmed surface is performed in three steps. First, trimmed surfaces with holes or cuts are transformed to th largest projection planes in which the meshes are constructed. The constructed meshes are transformed to the u-v parametric plane and then finally to the original 3D surfaces. Th exact locations of holes or cuts in projection planes are determined by the Newton-Raphson method. Sample meshes are constructed to demonstrate the effectiveness of the proposed algorithm.

• Advances in Traditional Medicine
• /
• 제8권4호
• /
• pp.448-451
• /
• 2008

Picrorhiza kurrooa Royle. is a well known medicinal plant among the indigenous medical practitioners of India. Present study is the first time to report the activity on the central nervous system. Preliminary study of the hot water extract showed significant depressant activity on the hole board test as evidenced from the ambulation and head dipping scores. The extract showed better activity compared to diazepam on the duration of pentobarbital induced sleeping time.