• 한국군사과학기술학회지
• /
• 제5권2호
• /
• pp.116-122
• /
• 2002

Electro Explosive Devices can be susceptible to electromagnetic interference. When these components are exposed to external electromagnetic fields, it may cause to induce sufficient current to generate enough heat for an inadvertent detonation. It is almost impossible to monitor the event of firing throughout the electromagnetic environment test. The survivability of EED for hazards of electromagnetic radiation is investigated. A fiber optic sensor is installed near the bridge wire after removing explosive material in order to measure the induced current on the bridge wire. The length of lead-wire of the EED fabricated is around 15 cm.

• 한국가구학회지
• /
• 제19권6호
• /
• pp.452-459
• /
• 2008

The compressed injection yellow ocher soil is the process-technology by drying the product through sunshine, not by firing like pottery and ceramic ware. It is the technology of development being able to achieve the far infrared ray and humidity adjustment by adding recycling paper, Korean paper and bamboo salt, and it corresponds with the construction enforcement ordinance 2007 as an interior-finishing product which is fire-resistant. In case that the yellow ocher soil would be used as lighting device and interior-finishing material and decoration, it could contribute to an improvement of National Health by avoiding the sick house syndrome and adding humidity adjustment, and it has more efficient economic effect due to using recycle-available additives. Through such developments of the yellow ocher soil products the domestic market of lighting device and construction material can be advanced and the replacement effect of imported goods & also export effect can be expected accordingly.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1568-1569
• /
• 2007

TFT-LCD used in display area is not a light-emissive device itself but TFT-LCD can overcome through the employ of the backlight unit (BLU). BLU is very important device in TFT-LCD system. However, the old-fashion BLU of CCFL type is crucible to the health due to the contained material, mercury (Hg). Moreover, strong temperature dependency of lamp employed with Hg becomes the other disadvantage in practical usage. To solve these problems, Hg-Free lamp with strong thermal resistance property is required to displace the Hg lamp. We studied optical and electrical properties of Xe-Ne-He mixed gas that is dependent on change of mixed ratio and pressure. In our results, the designed lamp without the phosphorescent material has the lowest firing voltage at xe 50%(Ne:He=9:1).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1698-1700
• /
• 2003

The electrostatic precipitator(ESP) is a device for removing particulate pollutants in the form of either a solid (dust or fumes) or a liquid (mist) from a gas using an electrostatic force, Electrostatic precipitation has been widely used for cleaning gas from almost all industrial processes with a medium to large gas volume(>2,000 $m^3/min$), including utility boilers, blast furnaces, and cement kilns. ESP is also in wide use for air cleaning in living environments (home, offices, hospitals, etc.) ESP has large advantages over other particulate control device : a low operating cost, a high collection performance, and ease of maintenance. The purpose of this study is to investigate the characteristics of the smoke removal of an air cleaner by adjusting variable frequency and monitoring of turbidity three results of this research are as follows ;the first is the best efficient switching frequency which is 60Hz, the second is the smoke removal time which is obtained to 9 seconds, third is that the best efficient firing angle is $90^{\circ}$ As a result, the switching trigger frequency and SCR gate firing angle is very important factor to predict the best collection efficiency.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.252-255
• /
• 2007

최근에 선진국에서 아주 빠른 시간(마이크로 초)에 작동이 되고, 크기가 소형이면서, 많은 케이블과 커넥터를 사용하지 않는 Smart Bus Controller(SCB) 기법을 이용한 초소형/초고속(스마트) 점화기술에 집중적인 연구를 진행하고 있는 실정이다. 이와 같은 점화기술은 기존의 점화장치에서 사용하던 케이블과 커넥터 공간을 최소화 할 수 있게 MEMS 기법을 이용하여 케이블과 커넥터 장치를 설계 제작하였고, 저 용량/저 전류에서 작동할 수 있는 플라즈마를 이용한 케이블과 커넥터 장치를 설계 제작하였고, 저 용량/저 전류에서 작동할 수 있는 플라즈마를 이용한 초고속 착화장치를 사용하여 전류와 전압(배터리) 크기와 용량도 많이 감소시킬 수 있다. 스마트 파이로테크닉스 점화장치 개발에는 간결한 회로 점화통제장치 설계 및 제작, 빠른 점화작동시간을 가능하게 하는 플라즈마형 초고속 착화장치 설계 및 특성연구가 필요하다. 본 연구에서는 플라즈마형 초고속 착화장치의 특성연구에 대해 기술하였다.

• International Journal of Aerospace System Engineering
• /
• 제9권2호
• /
• pp.1-9
• /
• 2022

The NEA release mechanism is used to provide restraint and release functions with low shock for critical deployment operations on solar arrays after launch. The GK3 solar array consists of 2 wings and 6 hold down points per panel. The NEA SSD9103S1 is a part of the GK3 solar array hold-down and release mechanism. Each NEA unit is equipped with two Z-diodes which provide power to a NEA unit connected in series after actuation of the fuse wire. This paper presents the hot firing test results of a quadrature NEA SSD9103S1 configuration. One output powers a maximum of 4 NEA SSD9103S1 units simultaneously. The necessary actuation pulse duration has been determined to meet margin requirement for thermal energy of minimum 4. Actuation thermal energy difference is about 6.6% between each half of two fired serial NEAs. Thermal energy margin at worst case is minimum 5.9 in case of an actuation pulse duration of 500 ms. Two series Zener impedance depend on current applied has been characterized by an additional actuation after all fuse wires are open circuit. Total number of actuation commands to the GK3 NEA unit reduce drastically from 24 in case of single NEA configuration down to 8 in case of parallel and quadrature NEA configurations. It can be accommodated by the existing HP2U Pyro design without any impact.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1225-1228
• /
• 2006

In the CNT paste for field emission, PbO frit had a fatal influence on CNTs by accelerating a decomposition of CNTs during firing. In the thermogravimetric analysis on the mixtures of CNTs and other ingredients, it was evident that CNTs began to burn out at ${\sim}350^{\circ}C$ by reacting with PbO. This problem was overcome by replacing the PbO frit by the Pb-free frit such that most of CNTs could survive during firing. Consequently, the emission current of the CNT paste prepared using the lead-free frit was improved as much as 250 %, compared to the PbO-containing one. The CNT paste was further optimized by adding a dispersant, whose dispersibility was assessed by measuring the resistance of the paste. With 10% dispersant added, the emission properties of the paste was greatly enhanced as 50 times higher as those of the paste without a dispersant.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2233-2235
• /
• 1999

The ac plasma display panel(PDP) is a flat light-emitting gas discharge device. Discharge gases directly take effects to the discharge phenomena of ac PDP. Therefore it is necessary to understand the characteristics of the discharge gases. In this paper, we have studied the effects of discharge gases by voltage transfer curves which show the discharge characteristics of ac PDP and the change of the effective wall capacitance during a discharge which depends on lateral spreading of charge distribution and the strength of discharge. As gas pressure increases, memory margins increases. and the firing voltage of a mixed gas is lower than that of a single gas such as He gas. The minimum sustain voltage and the maximum sustain voltage or firing voltage increases with decrease in the frequency. The effective wall capacitance increases as the discharge strength that is, the gap voltage between discharge electrodes increases.

• 전력전자학회논문지
• /
• 제10권4호
• /
• pp.397-402
• /
• 2005

유도기의 고정자를 직접 전력 계통에 연결하는 유도형 풍력발전기의 계통 연계시 과도 상태 돌입 전류의 크기를 줄이기 위한 새로운 소프트 스타터(Soft Starter) 제어 알고리즘을 제안하였다. 현재 국내에 가장 많이 설치되어 있는 정속 운전형 풍력발전시스템의 기본 구성을 살펴보고 특히 소프트 스타터의 계통 연계 알고리즘에 따라 발전 개시 순간 과도 상태 전류의 크기가 크게 달라짐을 확인하였다. 이를 위해 600kw급 유도 발전기를 포함한 정속형 풍력발전 시스템의 시뮬레이션 모델을 개발하였고 실험실 환경에서 제안된 알고리즘을 시험하기 위한 3.7kW급 모의실험장치를 제작하였으며, 소프트 스타터의 제어 알고리즘 개선에 의해 돌입전류의 크기가 약 20$\%$ 감소됨을 확인하였다.

• International Journal of Aerospace System Engineering
• /
• 제9권1호
• /
• pp.1-15
• /
• 2022

Pyrotechnic initiators provide a source of pyrotechnic energy used to initiate a variety of space mechanisms. Pyrotechnic systems build in electromagnetic environment that may lead to critical or catastrophic hazards. Special precautions are need to prevent a pulse large enough to trigger the initiator from appearing in the pyrotechnic firing circuits at any but the desired time. The EMC verification shall be shown by analysis or test that the pyrotechnic systems meets the requirements of inadvertent activation. The MIL-STD-1576 and two range safeties, AFSPC and CSG, require the safety margin for electromagnetic potential hazards to pyrotechnic systems to a level at least 20 dB below the maximum no-fire power of the EED. The PC23 is equivalent to NASA standard initiator and the 1EPWH100 squib is ESA standard initiator. This paper verifies the two safety margins for electromagnetic potential hazards. The first is verified by analyzing against a RF power. The second is verified by testing against a DC current. The EMC safety margin requirement against RF power has been demonstrated through the electric field coupling analysis in differential mode with 21 dB both PC23 and 1EPWH100, and in common mode with 58 dB for PC23 and 48 dB for 1EPWH100 against the maximum no-fire power of the EED. Also, the EMC safety margin requirement against DC current has been demonstrated through the electrical isolation test for the pyrotechnic firing circuits with greater than 20 dB below the maximum no-fire current of the EED.