• 한국군사과학기술학회지
• /
• 제18권5호
• /
• pp.525-531
• /
• 2015

In this paper, a novel impact sensing device for an ESAF(Electronic Safe and Arming Fuze) is presented. An impact sensing device is mounted in front of a weapon, and it detects an impact when it crashes against a target. There are two main design requirements to enhance the firing functional reliability of the ESAF; an operational reliability and a reduced latency, which is a delay time needed for sensing the impact. The design method of the contact-type impact sensing device, which employs an FPCB(Flexible Printed Circuit Board) so it can be used other weapons, is proposed. The tests demonstrated that the design described in this work show a reduced delay time with ensuring the operational reliability.

• 한국전기전자재료학회논문지
• /
• 제22권9호
• /
• pp.776-780
• /
• 2009

In this study, the opto-electric properties of EL devices with PMN dielectric layer with variation of firing tempereature were investigated. For the PMN dielectric layer process, the paste was prepared by optimization of quantitative mixing of PMN powder, $BaTiO_3$, Glass Frit, $\alpha$-Terpineol and ethyl cellulose. The EL device stack consists of Alumina substrate ($Al_2O_3$), metallic electrode (Au), insulating layer (manufactured PMN paste), phosphor layer (ELPP- 030, ELK) and transparent electrode (ITO), which is well structure as a thick film EL device. The phase transformation properties of PMN dielectric with various firing temperatures of $150^{\circ}C$ to $850^{\circ}C$ was characterized by XRD. Also the opto-electric properties of EL devices with different firing temperature were investigated by LCR meter and spectrometer. We found the best opto-electric property was obtained at the condition of $550^{\circ}C$ firing which is 3432.96 $cd/m^2$ at 1948.3 pF Capacitance, 40 kHz Frequency, 40% Duty, Vth+330 V voltage.

• 대한산업공학회지
• /
• 제42권2호
• /
• pp.122-128
• /
• 2016

The purpose of this study is to improve the firing elevation driving method for towed howitzer to prevent the musculoskeletal disorders. To adjust the firing elevation, it is required to rotate the hand wheel and this work has been done manually in the firing test range as the same method as field artillery troops. In the firing test range, the motor-driven firing elevation adjustment device was developed to improve the working efficiency and safety. These were compared by using posture classification scheme of RULA and REBA. It was measured elapsed time to investigate the improved operational efficiency. The optimal posture of upper body to operate the hand wheel for field artillery troops was proposed.

• 한국재료학회지
• /
• 제29권2호
• /
• pp.106-115
• /
• 2019

Recently, metal cases are widely used in smart phones for their luxurious color and texture. However, when a metal case is used, electric shock may occur during charging. Chip capacitors of various values are used to prevent the electric shock. However, chip capacitors are vulnerable to electrostatic discharge(ESD) generated by the human body, which often causes insulation breakdown during use. This breakdown can be eliminated with a high-voltage chip varistor over 340V, but when the varistor voltage is high, the capacitance is limited to about 2pF. If a chip capacitor with a high dielectric constant and a chip varistor with a high voltage can be combined, it is possible to obtain a new device capable of coping with electric shock and ESD with various capacitive values. Usually, varistors and capacitors differ in composition, which causes different shrinkage during co-firing, and therefore camber, internal crack, delamination and separation may occur after sintering. In addition, varistor characteristics may not be realized due to the diffusion of unwanted elements into the varistor during firing. Various elements are added to control shrinkage. In addition, a buffer layer is inserted in the middle of the varistor-capacitor junction to prevent diffusion during firing, thereby developing a co-fired product with desirable characteristics.

• 한국화재소방학회논문지
• /
• 제27권6호
• /
• pp.77-82
• /
• 2013

본 연구에서는 유무선 TCP/IP 기능과 Pan/Tilt 기능을 갖는 Charge-Coupled Device (CCD) 카메라를 이용하여 화재발생 위치를 추적하고, 스마트 모바일 통신 기능을 탑재한 안드로이드 시스템에 실시간으로 정보를 전달하여 원거리에서 화재를 인식하고 재난을 제어할 수 있는 스마트 화재 인식 시스템을 제안하였다. 제안한 방법을 구현하기 위하여 첫째, 입력영상을 hue saturation intensity (HSI) 변환하여 주변 밝기와 잡영상들을 제거하여 순수한 화염만을 분할하는 알고리즘을 제안하였다. 둘째, Pan/Tilt 기능으로 화재가 발생한 위치를 정확하게 추적하여 적절하게 화재 인식을 할 수 있도록 하였다. 셋째, 모바일 기능을 탑재한 안드로이드 통신시스템으로 화재상황을 원격지에서도 확인할 수 있는 스마트한 화재 인식 시스템을 구현할 수 있도록 하였다. 제안한 방법을 확인하기 위하여 10개의 화재 동영상을 입력하고 실험을 수행한 결과 10개의 동영상에서 화재영역을 분할하고 화재 위치를 모두 추적하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.79-82
• /
• 2011

가스발생기에서 배출되는 연료 과농의 미연가스를 안전하게 처리하기 위하여 후연소 장치를 개발하였다. 축소형 가스발생기에 대한 연소시험을 통해 후연소 장치의 작동성 및 안전성에 대한 검증을 수행하였다. 추가적인 액체산소를 공급함에 따라 후연소 화염의 길이가 급격하게 줄어드는 것을 확인하였다.

• 한국추진공학회지
• /
• 제4권3호
• /
• pp.19-28
• /
• 2000

고체추진 로켓모타의 개발이나 성능평가 때에는 추진기관의 추력, 연소실 압력, 온도, 연소시간 등 정적연소시험을 통해서 필요한 데이터론 측정한다. 그러나 휴대용 대공 유도무기의 경우에는 추진기 관의 화염으로부터 사수를 보호하기 위해 대단히 까다로운 안전규정을 요구하고 있다. 이러한 안전 규정들을 만족시키기 위해 설계된 분리장치나 점화안전장치의 개발 및 성능평가를 위해서는 이들 장치들이 결합된 추진기관에 대해 실제 비행 환경 하에서 설계목표의 신뢰도를 시험하기 위한 동적연소시험이 수행되어야 한다. 본 연구에서는 이러한 휴대용 대공 유도무기 추진시스템의 개발이나 성능평가를 위한 동적연소시험 기법 및 동적시험대의 설계 및 제작에 관한 연구를 수행하였다.

• 한국군사과학기술학회지
• /
• 제22권1호
• /
• pp.20-26
• /
• 2019

In this paper, we propose measurement based numerical resistivity model for low energy exploding foil initiator (LEEFI) of electronic safety and arming device(ESAD). A resistivity model describes a behavior of variable resistance in LEEFI by firing current. The previous resistivity model was based on high energy detonator applications as explosive bridge wire and exploding foil initiator. Therefore, to estimate the voltage, current, and burst time of LEEFI, a resistivity model suitable for LEEFI is needed. For the modeling of resistivity of LEEFI, we propose a specific action based equation which represents a behavior of LEEFI when firing current is applied. To verify the proposed model, we analyze a firing current transmission path to obtain parasitic impedance. We experimentally verify that the proposed resistivity model offers precise estimation for the behavior of variable resistance in LEEFI.

• 한국군사과학기술학회지
• /
• 제6권4호
• /
• pp.22-28
• /
• 2003

In the conventional weapon system, such as gun and small arms, it Is a general trend that for maximization of its performance and enhancement of its effectiveness, the firing control system(FCS) is developed and applied with the guns and small arms in the world. The FCS of the small arms for infantry man is composed of a few of sensors for acquisition of input data of FCS, such as range measurement, position sensing of weapon, temperature, etc., computer, displayer and power pack, and also the air burst munition is developed in parallel for the maximization of FCS's effectiveness. Since the flight time setting fuze for the air burst munition is adapted for next me, the measuring device of the muzzle velocity is needed to overcome the variation of muzzle velocity due to producing procedures and the differences of the using temperatures and so maintain the burst position accuracy This paper contained the technical information on the development of the measuring device of muzzle velocity, which designed in compact & light weight configuration with reliability and accuracy.

• 한국전자파학회논문지
• /
• 제15권6호
• /
• pp.573-578
• /
• 2004

전기 기폭장치(EED, electroexplosive device)는 브리지 와이어, 추진제, 리드 핀 및 금속관으로 구성되었고, 기폭신호가 인가되면 브리지와이어의 발열에 의해 추진제를 점화시킨다. 또한 고출력 통신기나 레이더에서 방사되는 전자파에 의해 EED는 예기치 않은 기폭이 발생할 수 있어, EED에 대한 EMC 설계 및 시험관련 군사규격서를 제정하여 적용하고 있다. 본 논문은 항공기에 대한 전기체 EMC 시험평가를 수행할 때, 항공기에 설치 된 EED 대신에 사용할 기폭용 퓨즈의 RF 감도 특성을 기술하였다 RF 기폭수준은 전송선로 이론을 활용하여 예측하였고, 군사규격서에 규정된 DC 감도와 RE 감도를 측정하였다.