• 한국추진공학회지
• /
• 제8권4호
• /
• pp.84-90
• /
• 2004

추진제 주입압력 350 psia 에서 0.95 lbf 의 정상상태 공칭추력을 내는 단일액체추진제 하이드라진 추력기의 성능평가 결과를 추력, 임펄스 비트, 비추력 등을 통하여 제시한다. 연소시험 형상과 절차에 대한 간략한 묘사와 더불어 정상상태 연소모드로부터 얻어지는 추진제 공급압력. 질량유량, 추력기 작동환경 진공도, 그리고 추력 등의 변이거동에 대한 전형적인 결과를 검토한다. 제시된 추력기 성능은 1-lbf급 표준형 단일추진제 로켓엔진의 기준성능에 성공적으로 비교된다. 선별된 추력기군을 위성체 추진시스템의 비행모델로 채택하기 위한 추력기간 성능편차에 대해 부연한다.

• 한국추진공학회지
• /
• 제24권1호
• /
• pp.9-16
• /
• 2020

200 N급 기체메탄/액체산소 소형로켓엔진의 성능시험평가 수행되었다. 산화제 공급압이 증가함에 따라 연소압과 추력이 증가하였으며, 이에 따라 비추력과 특성속도 및 그 효율이 증가하였다. 특성속도는 약 90%의 성능효율로 측정되었다. 시험조건의 연소실 종횡비 변화는 추력성능에 영향을 미치지 않았다. 또한, 시험결과의 신뢰도 확보를 위하여 불확도평가를 수행하였다.

• 한국전기전자재료학회논문지
• /
• 제20권7호
• /
• pp.650-657
• /
• 2007

This paper had mentioned about CCP light source application for increasing the efficiency of Xe lamp the mercury-free lamp. In order to increase the efficiency of Xe EEFL, we designed and manufactured the lamp used by mixture gas of Xe, Ne and He. Also, we have analyzed the electrical and optical properties with the firing voltage, sustain voltage, paschen's curve, wall charge, and capacitance. As a result, the firing voltage decreased by increasing the ration of mixture gas. and, It is owing to include the gas with high ionization energy. The firing voltage decreased in condition happening the penning effect, Because the ion of metastable state created from penning effect, Which can encourage the ionization phenomena. Also, the wavelength of 467.12 is increase. because of the energy transition in the wavelength of 147 nm. therefore, we can know about the affection of phosphor with UV emission properties. Through an experiment, Xe 100 % and Xe 75 % confirmed same spectrum properties by each mixture gas ratio. In the case of Xe 50 %, spectrum properties appeared Xe discharge and Ne-He discharge. That analyzed an electrical and optical properties. Therefore, confirmed that is excellent because properties of firing voltage, wall charge, capacitance in Xe 50 %, Ne : He = 9 : 1. We offered parameter in inverter manufacture and lamp manufacture by electrical and optical properties.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 추계총회,초청강연,특별강연,연구발표회
• /
• pp.119.1-119
• /
• 2000

• 한국세라믹학회지
• /
• 제51권2호
• /
• pp.132-137
• /
• 2014

The study was performed with low-grade limestone, which is used to make cement or is disposed of due to its low CaO content. In this study, the optimal condition of limestone with which to manufacture precipitated calcium carbonate (PCC) and limestone in fiber was determined through in-situ reactions. The best firing condition is with slaked lime with rapid cooling after 2 h of firing at $1000^{\circ}C$. In addition, the content of CaO can be increased by sorting the low-grade limestone using a 200 mesh filter, and the optical quality of old newspaper (ONP) was similar when using both low-grade and high-grade limestone. Also, controlling the particle size of PCC is an important factor pertaining to the optical characteristics of paper.

• 생물환경조절학회지
• /
• 제15권1호
• /
• pp.107-113
• /
• 2006

These studies were carried out to investigate the quality of green tea processed by different pan-firing hand rolling and to select the best conditions during the procedure of green tea processing the results were as follows. At harvestion tea plant leaf, tea plants had 4 leaves. each leaf size was 7.5 cm'$\square$2.6 cm, and weight of 100 buds 46.6 g. The increase of pan-fired time decreased in the moisture content and yield of green tea. After processing green tea, 5 times pan-fired one had much more contents of total nitrogen (T-N:5.31%), caffeine (2.00%) and total amino acid (T.A.A. : 3,046 mg%) and less content of tannin (13.41%) than the other treatments. but 3 times pan-fired one had the highest contents of vitamin C (204.3 mg%) and chlorophyll (365.0 mg%) among three kinds pan-firing method. Sixteen kinds of free amino acid including theanine as a good taste component of pan-fired green tea were isolated and measured by HPLC. Free amino acid (FAA) contents were in the range of $2,683{\sim}2,925$ mg% and among various pan-firing methods, 5 tims pan-fired one had the highest content of F.A.A. Among these free amino acids, theanine occupied as much as $56.4{\sim}61.3%$ of F.A.A. Lightness, yellowness and redness of 5 times pan-fired green tea were middle value among three different treatments. Besides, it gained the highest score of sensory evaluation among them. These above results suggested that 5 times pan-fired green tea was considered to be the best level as pan-firing times of green tea processing.

• 한국재료학회지
• /
• 제24권8호
• /
• pp.407-412
• /
• 2014

Currently, diopside ($MgCaSi_2O_6$) crystal glaze is used frequently for pottery works or in earthen wares, though the process is not straightforward. However, to create and control the positions and sizes of the crystals in desired amounts when making pottery is difficult. To solve this problem, a diopside crystal seed was created at a temperature of $1450^{\circ}C$. After planting this seed in the glaze, a glaze combination and firing process which allows a user to create crystals with the desired position and at the desired size were established. In addition, in order to investigate the creation process of the crystals, the growth patterns of the crystals were observed and examined using Raman spectrography and XRD and SEM analyses. As a result, the optimum synthesis condition of the diopside seed was created by mixing 1 mole of $CaCo_3$, 0.2 mole of $(MgCo_3)_4(MgCoH)_2{\cdot}5H_2O$ and 2 moles of $SiO_2$ and then applying a firing process to the mixture at $1,450^{\circ}C$ for 30 minutes. The optimum glaze content of the seed was 70 % feldspar, 20 % limestone and 10 % $MgCo_3$. For the firing process, it was confirmed that the size of crystal is larger with a longer firing time at $1100^{\circ}C$ by completing a two-hour process at $1280^{\circ}C$. In addition, the diopside crystal has columnar structure and is less than $1{\mu}m$ in size.

• 한국세라믹학회지
• /
• 제53권3호
• /
• pp.362-366
• /
• 2016

In this study, humidity control ceramics with good adsorption/desorption capabilities and high strength were fabricated from drinking-water treatment sludge (DWTS) and Onggi soil. The DWTS powder heat-treated at $800^{\circ}C$ and Onggi soil were mixed at weight ratios of 40:60, 50:50, 60:40, and 70:30 and fired at $800-1000^{\circ}C$. With increasing DWTS content, density and flexural strength increased. For the sample with a DWTS:Onggi soil weight ratio of 70:30, porosity and specific surface area decreased with increasing firing temperature, attributed to densification and grain growth at high firing temperatures. From the results obtained, a firing temperature of $800^{\circ}C$ is the optimum condition for fabricating humidity control ceramics with good adsorption/desorption capabilities and strength. The maximum adsorbed amount for the sample fired at $800^{\circ}C$ was $439g/m^2$.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.967-972
• /
• 2001

The emission of $NO_{x}$ during coal combustion is a major reason of environment impact. $NO_{x}$ is an acid rain precursor and participates in the generation of smog through ozone production. $NO_{x}$ can be divided into thermal $NO_{x}$, fuel $NO_{x}$ and prompt $NO_{x}$. Thermal $NO_{x}$ is formed in a highly temperature condition dependent. Fuel $NO_{x}$ is dependent on the local combustion characteristics and initial concentration of nitrogen bound compound, while prompt $NO_{x}$ is formed in a significant quantity in some combustion environments, such as low temperature and short residence times. This paper presents numerical simulation of the flow and combustion characteristics in the furnace of a tangential firing boiler of 500MW with burners installed at the every comer of the furnace. The purpose of this paper is to investigate the reduction of $NO_{x}$ emission in a 500MW pulverized coal tangential firing boiler with different OFA's and burner angles. Calculations with different air flow rates of over fired air(OFA) and burner angles are performed.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제24회 춘계학술대회논문집
• /
• pp.194-197
• /
• 2005

추진제 주입압력 350 psia 에서 0.95 lbf 의 정상상태 공칭추력을 내는 단일액체추진제 하이드라진 추력기의 펄스모드 성능평가 결과를 제시한다. 연소시험 절차에 대한 간략한 기술과 함께 펄스모드 작동으로부터 얻어지는 추진제 공급압력, 추력기 작동환경 진공도, 그리고 추력 등의 변이거동에 대한 전형적인 결과를 추력기의 열적 반응과 더불어 검토한다. 제시된 성능은 1-lbf급 표준형 단일추진제 로켓엔진의 펄스모드 기준성능과 성공적으로 비교된다.