• Journal of Oral Medicine and Pain
• /
• 제21권2호
• /
• pp.293-304
• /
• 1996

The purpose of this study was to investigate the peak electromyographic activity(EMG) and time intervals in firing sequence of Anterior temporalis(TA) and Masseter(MM) on clenching, the number of tender points in the head and neck muscles, the occlusal contact state on clenching, and their relationship. 78 patients with Temporomandibular Disorders(TMDs) participated and were classified into articular or muscular group by clinical signs and symptoms. BioEMG$\textregistered$ of integrated masticatory function analyzer, Biopak$\textregistered$ system(Bioresearch Inc., USA), was used to measure EMG and related items, and T- Scan$\textregistered$(Tekscan, USA), computerized occlusal analyser, was used to record occlusal contact state on maximum voluntary clenching. EMG and occlusal contact were synchronously recorded and analysed with SAS Statistical program. The results of this study were as follows : 1. In total subjects, EMG of TA was lower than that of MM in articular group but in muscular group, vice versa, As a result, the ratio TA to MM was significantly different between the two groups. no significant differece. 3. The number and force of occlusal contact were more in articular group, but there was no significant difference in Total Left-Right statistics(TLR) between the two groups. 4. In unilaterally affected subjects for muscle function, no significant difference was observed between the affected side and the contralateral side in articular group, but in muscular group, the item of the number of tender points showed significant difference. However, for occlusal contact items, contact force in articular group shows significant difference between the two sides. 5. Rate of coincidence of the first firing side of TA with affected side or preferred chewing side was higher and not different between the two groups, but no significant correlation was showed between the first firing side and the first occlusal contact side.

• 한국자동차공학회논문집
• /
• 제6권1호
• /
• pp.80-89
• /
• 1998

The residual gas in an spark-ignition engine is one of important factors on emissions and performance such as combustion stability. With high residual gas fractions, flame speed and maximum combustion temperature are decreased and these are deeply related with combustion stability especially at idle and NOx emission at relatively high engine load. Therefore, there is a need to characterize the residual gas fraction as a function of the engine operating load. Therefore, there is a need to characterize the residual gas fraction as a function of the engine operating parameters. In the present study, the quantitative measurement technique of residual gas fraction was studied by using Fast Response Flame Ionization Detector(FRFID). The measuring technique and model for estimation of residual gas fraction were reported in this paper. By the assuming that the raw signal from FRFID saturates with the same slope for firing and misfiring cycle, in-cylinder hydrocarbon(HC) concentration can be estimated. Residual gas fraction can be obtained from the in-cylinder HC concentration measured at firing and motoring condition. The developed measurement and calibration procedure were applied to the limited engine operating and design condition such as intake manifold pressure and valve overlap. The results show relevant trends by comparing those from previous studies.

• 전자공학회논문지B
• /
• 제33B권1호
• /
• pp.195-200
• /
• 1996

본 논문에서는 임의의 고조파를 선택적으로 제거하고자 할 때 실시간으로 제어가 가능한 PWM 인버터를 구현하였다. 직교함수인 왈쉬함수의 이론을 토대로하여 고조파를 선택적으로 제거할 수 있는 점호각 계산 방법을 채택하였다. 또한 점호각을 실시간으로 계산하여 단상 및 3상 인버터 회로에 적용할 수 있는 논리회로를 설계하였다. 설계된 논리회로의 출력파형을 입력으로 하는 시뮬레이션 회로를 이용하여 구현한 PWM 인버터의 정상상태 특성동작을 확인하였다.

• 한국소음진동공학회논문집
• /
• 제16권4호
• /
• pp.319-328
• /
• 2006

4-실린더 엔진의 작동 시 크랭크샤프트의 기계적 거동을 해석하는 방법에 관한 연구 논문이다 이 해석의 목적은 모드 해석을 단순화 하기위해 Pin 과 Arm을 일정하게 가정하고, 이를 통해 단순화된 크랭크샤프트의 특성을 연구하는 것이며, 해석을 통하여 얻어진 전달 함수에서의 고유진동수와 모드 형상을 실험을 통한 모드 해석과 비교하였다. 시뮬레이션을 통한 결과와 실험을 비교한 결과 해석치와 실험치의 값이 일치함을 확인할 수 있었고 이를 통하여 해석 모델을 검증하였다. 또한 검증된 모델을 통하여 엔진 작동 시 크랭크샤프트의 특성을 해석하고자 하였다. 초기 연소 조건에 기초하여 주파수 영역에서 크랭크샤프트의 동적 거동을 해석하기 위한 새로운 방법을 기술하였다. 새로운 기법은 엔진의 작동 조건에서 저널 베어링과 밸런서의 형상 변경을 통하여 얻어진 에너지 값을 계산하기 위해서 RMS값을 이용하였다.

• 전자공학회논문지C
• /
• 제34C권5호
• /
• pp.9-18
• /
• 1997

The petri net is a graphic model which is adaptable in modeling a complex concurrent parallel ssystem, and it is widely used in the fields of industrial enginering, computer science, electric engineeringand chemistry. Recently, the net is applied to the communication protocol, and extended to represent complex systems. There are several extended petri nets named as TPN (timed petri net), SPN (stochastic petri net), FPN(fuzzy petri net) and TFPN(timed fuzzy petri net). Accodingly, this SPN (stochastic petri net), FPN (fuzzy petri net) and TFPN(timed fuzzy petri net). Accodingly, this paper proposes an advanced communication protocol modeling method using the fuzzy value of the transition and firing delay time as the arguments of the function. The proposed method can produce clearer firing rules, and it is supposed to be used to design and analyse communication protocols in great effection.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권2호
• /
• pp.150-158
• /
• 1999

The process of designing protective circuits against damage by transient overvoltages requires much work and expensive equipment. However computer simulation using PSpice can overcome these problems. In this paper a gas tube and a ZnO varistor Pspice-model considering the steepness of the wave-front were presented. The effects of various waveforms on the transient behaviors and firing volt-ages of a gas tube were modeled by controlled voltage source E controlled current source G and TABLE function of PSpice. And the nonlinear characteristics of a ZnO varistor were modeled by controlled voltage source E and H. To estimate the characteristics of the models proposed various waveforms specified in IEC Std. 1000310-4-5 were used in the simulation and the actual tests. The simulation results were compared with test results and showed good agreement.

• Journal of Ceramic Processing Research
• /
• 제13권spc2호
• /
• pp.282-285
• /
• 2012

Lead-free (Bi0.5Na0.41K0.09)TiO3 (BNKT) multilayer ceramic actuators were prepared using tape-casting and screen-printing techniques. Co-firing behavior of BNKT/AgPd laminates was examined as a function of sintering temperature. It was found that co-firing induced bending and electrical properties were very sensitive to sintering condition. By optimizing sintering conditions, lead-free electrostrictive multilayer actuators with normalized strain Smax/Emax of 266 pm/V have been successfully fabricated, which is promising for lead-free actuator applications.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권2호
• /
• pp.83-91
• /
• 2017

Purpose: The purpose of this study is to develop a quality assurance model and to determine appropriate warranty period for a guided missile using its field data. Methods: 10 years of actual firing data is collected from the defense industry company and military. Parametric maximum likelihood estimation for a reliability function is determined with the data. Results: The reliability function estimates average lifetime of the missile. That function shows a user requirement, 80% reliability (lifetime) is come up when 8 years have passed, which is longer than the estimates in the missile's development phase. Conclusion: Quality assurance warranty for a guided missile must be established with actual test data. It is necessary to update and modify the reliability prediction and the warranty period with actual field test data.

• 한국세라믹학회지
• /
• 제39권3호
• /
• pp.286-293
• /
• 2002

소성온도에 따른 ZnO계 적층형 세라믹 칩 바리스터(약칭 MLV)의 미세구조와 전기적 특성의 변화를 조사하였다. 소성온도 1100$^{\circ}$C에서 Ag/Pd(7:3) 내부전극층의 두께가 불균일하게 변화하면서 부분적인 공극이 발생하기 시작하고, 1150$^{\circ}$C에서는 상당한 전극 패턴의 소멸과 박리가 관찰되었다. 950$^{\circ}$C로 소성한 MLV의 경우 누설전류의 열화가 특히 컸는데 이는 미반응의 pyrochlore상이 잔류하여 액상과 천이원소의 균일한 분포가 일어나지 않았기 때문이라 사료된다. 1100$^{\circ}$C 이상의 온도로 소성한 경우에는 바리스터 특성 및 그 재현성의 저하가 관찰되었는데, 이는 내부전극의 소멸, 전극물질과 소체의 반응, 그리고 $Bi_2O_3$의 휘발에 기인한 것으로 보인다. 한편, 950∼1100$^{\circ}$C의 전 소성온도 범위에 걸쳐 온도가 증가할수록 정전용량과 누설전류는 증가하고 항복전압과 피크전류는 감소하였으나, 비선형계수와 클램핑 비는 각각 ∼30 및 1.4로 거의 일정한 값을 유지하였다. 특히 1000∼1050$^{\circ}$C 소성체의 경우 칩 바리스터에 적합한 바리스터 특성이 재현성 있게 나타났다. 결과적으로 Ag/Pd(7:3) 합금은 1050$^{\circ}$C의 동시 소성 온도이하에서는 $Bi_2O_3$를 함유한 대부분의 ZnO계 MLV의 내부전극으로 충분히 사용가능한 것으로 판단된다.

• 마이크로전자및패키징학회지
• /
• 제5권1호
• /
• pp.1-6
• /
• 1998

Two kinds of the ac-plasma display panel (PDP) with the comb type and the matrix type electrodes were fabricated. The discharge properties were studied as a function of as species (Ne and Ne+He+Xe) and its pressure. The firing voltages (Vf) of the PDP with comb type electrodes were 159 V and 195 V under pure Ne and ne+He+Xe(68:30:2) gas mixture respectively. In case of PDP cell with the matrix type electrodes the Vf was increased to 200 V for pure Ne and 240 V for Ne+He+Xe gas mixture under the same gas pressure(300 mbar).