• Journal of the Korean Institute of Gas
• /
• v.10 no.4 s.33
• /
• pp.29-33
• /
• 2006

Estimation of process safety is important in the chemical process design. Prediction for flash points of flammable substances used in chemical processes is the one of the methods for estimating process safety. Flash point is the property used to examine the potential for the fire and explosion hazards of flammable substances. In this paper, multivariate statistical analysis methods(partial least squares(PLS) quadratic partial least squares(QPLS)) using experimental data is suggested for predicting flash points of flammable substances of binary systems. The prediction results are compared with the values calculated by laws of Raoult and Van Laar equation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.3
• /
• pp.348-352
• /
• 2004

The mold transformers have been widely used in underground substations in large building and have some advantages in comparison to oil-transformer, that is low fire risk, excellent environmental compatibility, compact size and high reliability. In addition, the application of mold transformer for outdoor is possible due to development of epoxy resin. The mold transformer generally has cooling duct between low voltage coil and high voltage coil. A mold transformer made by one body molding method has been developed for small size and ow loss, but it needs some cooling method because heat radiation between each winding is difficult. The life of transformer is significantly dependent on the thermal behavior in windings. Many transformer designers have calculated temperature distribution and hot spot point by finite element method(FEM) to analyze winding temperature rise. In this paper, The thermal analysis of pole mount mold transformer with one body molding by duct condition is investigated and the test result of temperature rise is compared with simulation data.

• Research in Community and Public Health Nursing
• /
• v.16 no.2
• /
• pp.205-220
• /
• 2005

Purpose: The purpose of this study was to provide basic data to develop safety education programs in elementary school. Method: Analysis is made based on textbooks for $1st-{\sim}6th-grade$ elementary school students published by Korea Ministry of Education & Human Resources Development. Results: 1) Among the textbooks. only , . , and courses dealt with safety education. 2) The contents of safety education included traffic safety, water safety, indoor and outdoor safety, fire, emergency measures, misuse and abuse of drug, smoking, toy safety, sports safety, leasure safety and disasters. However, the contents were theoretical, fragmentary, local and limited. Conclusion: These results suggest that the consents of safety education must be strengthened, and more practical and more behavior-oriented in consideration of activities.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.7
• /
• pp.1063-1071
• /
• 2004

Accurate heat release analysis of cylinder pressure data is important for evaluating performance in the development of diesel engine However, traditional single zone first law heat release model(SZM) has significant limitations due to the simplified assumption of uniform charge and neglecting local temperature inside cylinder during combustion process. In this study. heat release rate based on single zone heat release model has been evaluated by comparison with computational analysis results using Fire code which is based on multi-dimensional model(MDM). To overcome limitations due to simplicity of single zone assumption. especially the influence of specific heat ratio on gross heat release has been esteemed and newly suggested were the equation $\gamma$= $\gamma$(${T/T}_{max}$) which describes the variations of gases thermodynamic properties with mean temperature and maximum mean temperature inside cylinder Single zone heat release model applied with this equation is shown to give very good results over whole range of operating conditions when compared with computational analysis results based on multi-dimensional model.

• Korean Journal of Occupational Health Nursing
• /
• v.26 no.4
• /
• pp.227-235
• /
• 2017

Purpose: This descriptive correlational study investigated the effects of violent experience and resilience on burnout in emergency medical technicians (EMTs). Methods: The participants were 160 EMTs working in fire stations (safety center and local center) located in U, B, and D city. The collected data were analyzed by descriptive statistics, independent t-test, ANOVA, $Scheff{\acute{e}}$ test post-hoc analysis, Pearson correlation coefficients, and multiple regression analysis using IBM SPSS Statistics 20.0. Results: The number of EMTs getting into ambulances was significantly associated with violent experience, resilience, and burnout. Position of EMTs was significantly associated with both resilience and burnout. In the multiple regression analysis, the subscales of durability and optimism in resilience were significantly associated with burnout after controlling for confounding variables. Conclusion: This study indicated that improving durability and optimism in resilience was important to cope with experience of violence and to prevent burnout in EMTs.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.8
• /
• pp.77-84
• /
• 2005

The considerations for reminder life of transmission line is gradually higher. It is requisite for investigation of ACSR life to test tensile load of ACSR as a fundamental data. It is vary important to analysis correlations between results of tensile load testing and elapsed years. Estimation of ACSR life can be obtained by statistics processing using mechanical experimental results. It is a general method to use regression analysis as a statistics processing technique. In this paper, we did experiment on tensile strength of ACSR by using a new and due to flame for artificial fire, and gathering due to a flame. The limit of life estimation is decided by basic line using twenty percentage reduction of rate tensile strength. This basic line is like to results of Canada Ontario Hydro-research. There are $480[mm^2]$ ACSR which are experimented on this study.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1135-1138
• /
• 2003

The transformer is major equipment in power receiving and substation facilities. Necessary conditions required for the transformer are compactness, lightness, high reliability, economic advantages, and easy maintenance. The pole-mount transformer installed in distribution system is acting direct role in supply of electric power and it is electric power device should drive for long term. Most of modem transformer are oil-filled transformer and accident is happening considerable. The mold transformers have been widely used in underground substations in large building and have some advantages in comparison to oil-transformer, that is low fire risk, excellent environmental compatibility, compact size and high reliability. In addition, the application of mold transformer for outdoor is possible due to development of epoxy resin. The mold transformer generally has cooling duct between low voltage coil and high voltage coil. A mold transformer made by one body molding method has been developed for small size and low loss. One body molding transformer needs some cooling method because heat radiation between each winding is difficult. In this paper, The thermal analysis of pole mount mold transformer with one body molding by duct condition is investigated and the test result of temperature rise is compared with simulation data.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.2
• /
• pp.49-57
• /
• 2023

The purpose of this study is to explore how adolescents' psychological characteristics affect their sense of life safety according to gender. To this end, a survey was conducted on male and female high school students in six schools in the C area, and a total of 1,048 data were used for analysis. Differences in major variables according to gender were verified, and the effect of psychological characteristics on living safety awareness was analyzed through hierarchical multiple regression analysis. As a result of the analysis, depression, anxiety, type A characteristics, and the presence or absence of experience in accidents did not significantly affect life safety awareness in the male student group. On the other hand, in the female student group, anxiety and type A characteristics had a significant effect on life safety awareness. Anxiety negatively affects living safety awareness, and type A characteristics have been shown to have a positive effect on living safety awareness. The presence or absence of depression and accident experience did not significantly affect life safety awareness. The results of these studies suggest that gender differences should be considered in education to prevent life safety awareness and that education that reflects the psychological characteristics of adolescents is necessary.

• Journal of the Korea Society for Simulation
• /
• v.29 no.3
• /
• pp.83-91
• /
• 2020

To use the OneSAF model for the analysis of Defence M&S, the most critical factor is the acquisition of input data. The model user is hard to determine the input data such as the probability of hit(P_h) and the probability of kill(P_k). These data can be obtained directly by live fire during the development test and the operational test. Therefore, this needs more time and resources to get the P_h and P_k. In this paper, we reviewed possible ways to obtain the P_h and P_k. We introduced several data producing methodologies. In particular, the error budget method was presented to convert the P_h(%) data of AWAM model to the error(mil) data of OneSAF model. Also, the conversion method which can get the adjusted results from the JMEM is introduced. The probability of a hit was calculated based on the error budget method in order to prove the usefulness of the given method. More accurate data were obtained when the error budget method and the projected area from the published photo were used simultaneously. The importance of the P_h calculation was demonstrated by sensitivity analysis of the P_h on combat effectiveness. This paper emphasizes the importance of determining the P_h data and improving the reliability of the M&S system though steady collection and analysis of the P_h data.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2005.11a
• /
• pp.81-86
• /
• 2005

이 논문에서는 산불 발생의 패턴을 예측하기 위해 데이터 마이닝의 클러스터링 기법을 이용하여 산불 데이터를 그룹화하고 그 결과를 이용하여 산불 데이터의 상관관계를 분석하는 방법을 제안하였다. 즉, 클러스터링 기법을 이용하여 산불 데이터를 사용자가 원하는 수의 그룹으로 분류하고, 생성된 산불 데이터 클러스터 모델을 이용하여 새로운 유형의 산불패턴을 예측 할 수 있도록 하였다. 또한 결과 클러스터의 생성을 위해 이전의 산불 분포 데이터를 저장 관리하여 클러스터 간의 상관관계 분석을 통해 시퀀스를 생성하였고, 생성된 각각의 클러스터 시퀀스를 통합하여 클러스터들의 시퀀스를 추출하여 산불이 발생한 이후의 향후 발생 가능한 산불 유형을 예측하기 위한 방법을 제공하였다. 이는 과거에 발생된 산불의 유형뿐만 아니라 새로운 형태의 산불 유형 분류나 분석에 이용 가능하다.