• 한국안전학회지
• /
• 제39권2호
• /
• pp.9-21
• /
• 2024

Static-electricity-induced fires and explosions persistently occur every year, averaging approximately 80 and 20 cases annually according to fire statistics provided by the National Fire Agency and industrial accident statistics provided by the Ministry of Employment and Labor, respectively. Despite the relatively low probabilities of these accidents, their potential risks are high. Consequently, effective risk assessment methodologies and accident investigation strategies are essential for efficiently managing static-electricity hazards in fire- and explosion-prone areas. Accordingly, this study aimed to identify the causal variables essential for accident investigations, thereby facilitating risk assessments and the implementation of effective recurrence prevention measures to mitigate static-electricity hazards in fire-and explosion-prone regions. To this end, industrial accident statistics recorded over the past decade (2012 to 2021) by the Ministry of Employment and Labor were analyzed to identify major fire and explosion incidents and related industrial accidents wherein static electricity was identified as a potential ignition source. Subsequently, relevant investigation reports (63 cases) were thoroughly analyzed. Based on the results of this analysis, existing electrostatic fire and explosion risk assessment techniques were refined and augmented. Moreover, factors essential for investigating electrostatic fire and explosion disasters were delineated, and the primary causal variables necessary for effective risk assessments and scientific investigations were derived.

• 한국연소학회지
• /
• 제20권1호
• /
• pp.1-5
• /
• 2015

Fire and explosion analysis are performed for the quantitative risk assessment on the LNG test plant. From the analysis for a case of fire due to large leakage of LNG from the tank, it is obtained that loss of lives can be occurred within the radius of 60 m from the fire origin. Specially, wind can extend the extent of damage. Because the LNG test plant is not enclosed, the explosion overpressure is less than 6 kPa and the explosion has little effect on the integrity of the LNG test plant.

• 한국안전학회지
• /
• 제8권2호
• /
• pp.58-63
• /
• 1993

Recently, a large amount of flammable or explosive materials have been handled or stored in chemical industries. H the equipments fail or the materials release in consequence of operation errors, fire and explosion could occur to them. Thus, risk assessment using quantification of risks is very important when design of processes and modifications of installed processes are performed. The purpose of this study is to develop the program for fire and explosion index in order to quantify the expected damage of fire and explosion incidents in chemical plants, to identify equipment that would be likely to contribute to the creation or escalation of an incident, to comunicate the potential fire and explosion risk to management and to account of damage cost.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1996년도 학술발표회
• /
• pp.37-42
• /
• 1996

The assessment of catastrophic accidents such as BLEVE, vapor cloud explosion, and toxic material releases in the chemical process industries(CPI) shall be carried out according to the Requirement of PSM/SMS enforced by Korea Government Agencies, but reasonable models are not proposed for the practical application. The traditional models, TNT Equivalency Model, are well-known and helpful for the assessment of vapor cloud explosion. However, the estimated-damage-area using the traditional model has much more deviations comparing to the real damage caused by vapor cloud explosion suffered before. These are why an expert system for the assessment of vapor cloud explosion has been developed, which is based on theoretical, statistical and experimental data, and it would be helpful for CPI to evaluate the damage-area in case of vapor cloud explosion.

• 한국화재소방학회논문지
• /
• 제15권4호
• /
• pp.64-70
• /
• 2001

지하공간 중 지하가의 사고 ,사례와 문헌 연구 및 실태를 조사, 검토하고, 운영, 관리 단계에서 위험요인을 추출하여 화재 폭발 안전대책의 평가요소 및 위험성 평가수법을 제시하고자 한다. 또한, 지하가의 대규모화, 심층화, 복합화에 대한특성 항목을 분류하고 7가지 대책의 중요도를 제시하여 지하가 계획단계의 지표로 삼고자 한다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.289-296
• /
• 1997

This paper discribes an experimental explosion risk assessment study on refrigerators containing flammable hydrocarbon refrigerant. A refrigerator used in this study is a larder fridge type, 215 liter in volume. The hydrocarbon refrigerant used in the refrigerator is iso-butane(C$_4$H$_{10}$). For the explosion safety assessment of the refrigerator, temperature of compressor, cooling air circulation fan motor, defrost heater and inner lamp were measured during the operation. And to confirm the ignitablity of flammable gas by the electric spark of the switches of the refrigerator, ON-OFF test of all switches were conducted with compulsorily near the stoichiometric concentration atmosphere of iso-butane-air mixture. As the result of experiment above mentioned and another experiment for the explosion safety assessment, we can conclude that explosion hazard in connection with the use of hydrocarbon refrigerant was few.w.

• 한국항해항만학회지
• /
• 제45권3호
• /
• pp.109-116
• /
• 2021

울산항 부두에 이중 접안하여 환적작업 중이던 케미컬 탱커선 폭발로 주변 선박화재 등 울산항 내에서 큰 피해가 발생하였다. 유사 사고의 재발을 방지하기 위한 후속 조치로 '항만 내 위험물 안전관리 종합대책'이 수립되었으며 사고 발생 시에 폭발 위험성과 항내 주요 시설에 대한 영향 등을 고려한 위험물 환적부두의 지정이 요구된다. 본 연구는 폭발 위험성 기반의 환적부두 제시를 위하여 울산항 주요 환적화물 대상의 Fire & Explosion Index 평가를 실시하였다. 스티렌모노머와 벤젠의 Fire & Explosion Index 평가결과 심각한 폭발 위험성을 확인하였고, 평가결과를 기준으로 노출반경을 산출 하였다. 노출반경 결과를 기반으로 주요 부두별 위험범위를 산정하였으며, 항만시설, 주변 위험시설 및 거주시설을 고려한 환적가능 부두 후보지로 12개 부두를 제시하였다. 본 연구는 위험반경만을 고려하였기 때문에 향후 실질적인 위험물 환적 부두의 지정 시에는 해상교통안전성, 부두 및 계류시설, 안전설비 및 비상대응을 위한 접근성 등을 종합적으로 고려하여 결정하여야 할 것이다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2001년도 추계학술대회 논문집
• /
• pp.68-73
• /
• 2001

• 한국지역지리학회:학술대회
• /
• 한국지역지리학회 2009년도 하계학술대회 발표집
• /
• pp.108-115
• /
• 2009

An increase in oil and gas plants caused by development of process industry have brought into the increase in use of flammable and toxic materials in the complex process under high temperature and pressure. There is always possibility of fire and explosion of dangerous chemicals, which exist as raw materials, intermediates, and finished goods whether used or stored in the industrial plants. Since there is the need of efforts on disaster damage reduction or mitigation process, we have been conducting a research to relate explosion model on the background of real 3D terrain model. By predicting the extent of damage caused by recent disasters, we will be able to improve efficiency of recovery and, sure, to take preventive measure and emergency counterplan in response to unprepared disaster. For disaster damage prediction, it is general to conduct quantitative risk assessment, using engineering model for environmentaldescription of the target area. There are different engineering models, according to type of disaster, to be used for industry disaster such as UVCE (Unconfined Vapor Cloud Explosion), BLEVE (Boiling Liquid Evaporation Vapor Explosion), Fireball and so on, among them.we estimate explosion damage through UVCE model which is used in the event of explosion of high frequency and severe damage. When flammable gas in a tank is released to the air, firing it brings about explosion, then we can assess the effect of explosion. As 3D terrain information data is utilized to predict and estimate the extent of damage for each human and material. 3D terrain data with synthetic environment (SEDRIS) gives us more accurate damage prediction for industrial disaster and this research will show appropriate prediction results.

• 한국화재소방학회논문지
• /
• 제30권2호
• /
• pp.114-122
• /
• 2016

본 논문은 리튬배터리의 고온 및 단락전류에 따른 폭발 및 화재 위험성을 분석하기 위한 연구이다. 이에 대표적인 리튬배터리 종류인 리튬폴리머배터리 및 리튬이온배터리를 실험시료로 선정하였다. 고온에 따른 폭발위험성 측정결과 리튬폴리머배터리의 경우 평균 $170^{\circ}C$, 리튬이온배터리의 경우 평균 $187^{\circ}C$에서 폭발이 일어났다. 단락전류에 따른 온도상승측정결과 보호회로가 정상작동 할 경우 과전류를 제한하여 온도상승이 거의 없었지만, 보호회로가 고장 났을 경우 리튬폴리머배터리의 경우 평균 $115.7^{\circ}C$ 및 리튬이온배터리 경우 평균 $80.5^{\circ}C$까지 상승하여 화재 및 화상 위험성이 높게 나타나는 것으로 측정되었다.