• 한국신뢰성학회지:신뢰성응용연구
• /
• 제4권2호
• /
• pp.121-131
• /
• 2004

HALT (Highly Accelerated Life Test) was performed to improve the reliability by removing the potential failure for newly developing PCB used for the vibration condition from 2OHz to 2OOHz. During HALT, it is found that the lead of Al electrolytic capacitor of SMD type is detached from PCB. As the result for the failure analysis and FEM (Finite Element Method), it is clarified that the root cause for this failure is the improper attachment of an Al electrolytic capacitor on PCB by the mistake of a PCB design. HALT was performed in previous condition to verify the failure analysis after molding an epoxy resin to overcome the PCB design mistake and it is not observed the same failure. Therefore, it is assumed that the same failure in field will be not occurred by the proper implementation.

• International Journal of Precision Engineering and Manufacturing
• /
• 제1권2호
• /
• pp.48-54
• /
• 2000

This paper presents the effect of shape of external corrosion in pipeline on failure prediction by using a numerical simulation. The numerical study for the pipeline failure analysis is based on the FEM(Finite Element Method)with an elastic-plstic and large-deformation analysis. Corrosion pits and narrow corrosion grooves in pressurized pipeline were analysed. A failure criterion, based on the local stress state at the corrosion and a plastic collapse failure mechanism, is proposed. The predicted failure stress assessed for the simulated corrosion defects having different corroded shapes along the pipeline axis compared with those by methods specified in ANSI/ASME B31G code and a modified B31G code. It is concluded the corrosion geometry significantly affects the failure behavior of corroded pipeline and categorisation of pipeline corrosion should be considered in the development of new guidance for integrity assessment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.907-908
• /
• 2011

• Structural Engineering and Mechanics
• /
• 제68권1호
• /
• pp.81-94
• /
• 2018

This paper uses the finite element method (FEM) considering geometrically nonlinear strains to study the first ply failure of laminated composite skewed hypar shell roofs through well-established failure criteria along with the serviceability criterion of deflection. Apart from validating the approach through solution of benchmark problems, skewed hypars with different practical parametric variations are studied for failure loads and tendencies. First ply failure zones are also identified to suggest design and non-destructive monitoring guidelines to the practising engineers. Recommendation tables regarding the design approaches to be adopted in specific cases and factor of safety values needed to be imposed on first ply failure load values for varying shell curvatures are also suggested in this paper. Providing practical inputs to design engineers is the main achievement of the present study.

• 대한기계학회논문집A
• /
• 제29권7호
• /
• pp.947-954
• /
• 2005

The purpose of this study is to develop failure pressure evaluation models, which are applicable to straight pipes and elbows containing an internally wall thinning defect induced by flow-accelerated-corrosion (FAC). In this study, thus, three dimensional finite element (FE) analyses are performed to investigate the dependences of failure pressure of internally wall thinned pipe on the defect shape, the pipe geometry, and the defect location and bend radius of elbow. Also, the existing failure pressure assessment models for externally wall thinned pipes are examined. Based on these, the new models for assessing failure pressure of piping components with an internally wall thinning defect are proposed. Comparison of failure pressure, predicted by proposed models, with FE analysis result shows good agreement regardless of pipe type, defect shape, and defect location and bend radius.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.932-941
• /
• 2021

This paper suggests a fracture simulation method for SFR metallic fuel pin under accident condition. Two major failure mechanisms - creep damage and eutectic penetration - are implemented in the suggested method. To simulate damaged element, stress-reduction concept to reduce stiffness of the damaged element is applied. Using the proposed method, the failure size of cladding can be predicted in addition to the failure time and failure site. To verify the suggested method, Whole-pin furnace (WPF) test and TREAT-M test conducted at Argonne National Laboratory (ANL) are simulated. In all cases, predicted results and experimental results are overall in good agreement. Based on the simulation result, the effect of eutectic-penetration depth representing failure behavior on failure size is studied.

• Composites Research
• /
• 제36권5호
• /
• pp.303-309
• /
• 2023

본 논문에서는 압축 하중을 받는 오픈 홀(open-hole compression) 탄소섬유 복합재(carbon fiber reinforced plastic, CFRP) 시편의 평면 내 손상(in-plane damage) 및 층간 분리(delamination)를 예측하기 위한 모델링 방법을 제안하고 유한요소해석(finite element analysis)을 수행하였다. 유한요소모델은 오픈 홀 복합재 시편의 점진적 손상 및 파손 분석(progressive damage and failure analysis)을 위해 Hashin 파손 기준(hashin failure criteria)과 표면 기반 응집 거동(cohesive behavior) 모델을 기반으로 구성되었으며 ABAQUS/EXPLICIT Solver를 활용하여 해석을 수행하였다. 유한요소해석의 타당성을 종합적으로 평가하기 위해 세 가지 유형의 적층 패턴(stacking sequences)을 가지는 오픈 홀 압축 복합재 시편에 대한 시험 결과와 비교하였다. 오픈 홀 압축 시편의 강도와 강성은 백분율 오차(percentage error) 10.0 % 미만으로 비교적 잘 예측하였으며 오픈 홀 복합재 적층판의 인장/압축 매트릭스 손상 상태 및 원공(hole) 근처의 복합재 계면 층간 분리에 대한 손상 상태를 추출하여 평가하고 분석하였다.

• 한국강구조학회 논문집
• /
• 제16권3호통권70호
• /
• pp.333-344
• /
• 2004

복합재료는 건설공학 분야의 해석, 설계, 제작, 건설, 품질 제어 등에서 경제적이고 효율적인 재료로 사용될 수 있다. 많은 교량 구조물중 거더, 가로보로 이루어진 콘크리트 상판은 특별직교이방성판으로 거동한다. 이러한 경계조건을 갖는 단면 혹은 불규칙한 단면을 갖는 시스템은 해석적인 해를 구하기가 매우 어렵다. 이러한 문제에 대한 해석을 위해서 유한차분법이 이용되었다. 본 논문에서는 인장강도 감소율을 적용하여 파괴강도 해석을 수행하였다. 또한 이러한 경우에 대한 수치해석을 수행하였다. 응력영역에 대한 Tasi-Wu의 파괴기준을 적용하였다.

• Wind and Structures
• /
• 제26권1호
• /
• pp.45-56
• /
• 2018

Wind damage of urban trees arises to be a serious issue especially in the typhoon-prone areas. As a family of tree species widely-planted in Southeast China, the structural behaviors of Plane tree is investigated. In order to accommodate the complexities of tree morphology, a fractal theory based finite element modeling method is proposed. On-site measurement of Plane trees is performed for physical definition of structural parameters. It is revealed that modal frequencies of Plane trees distribute in a manner of grouped dense-frequencies; bending is the main mode of structural failure. In conjunction with the probability density evolution method, the fragility assessment of urban trees subjected to wind excitations is then proceeded. Numerical results indicate that small-size segments such as secondary branches feature a relatively higher failure risk in a low wind level, and a relatively lower failure risk in a high wind level owing to windward shrinks. Besides, the trunk of Plane tree is the segment most likely to be damaged than other segments in case of high winds. The failure position tends to occur at the connection between trunk and primary branches, where the logical protections and reinforcement measures can be implemented for mitigating the wind damage.

• 한국추진공학회지
• /
• 제19권5호
• /
• pp.78-83
• /
• 2015

복합재 연소관은 적층구조이므로 한 층이 손상되면 손상이 진전되어 전체 연소관의 파손이 발생한다. 금속재 라이너 위에 복합재를 와인딩하면 한 층이 손상되어도 전체 연소관의 파손이 발생되지는 않는다. 본 연구에서는 금속재 연소관에 후프 와인딩한 하이브리드 연소관의 파열압력을 예측하기 위해 유한요소해석과 연소관의 파열시험을 통하여 결과를 비교하였으며, 하이브리드 연소관의 파열압력 예측을 통하여 알루미늄 라이너의 두께를 결정하고 복합재료의 적층두께를 결정함으로써 하이브리드 연소관 설계에 사용할 수 있다.