• Tribology and Lubricants
• /
• v.37 no.3
• /
• pp.112-116
• /
• 2021

Appropriate friction model usage is important for impact analysis because the relative motions between parts that are in contact for very short durations can vary greatly depending on the friction model. Vehicle seat components that have significant effects on impact analysis are also considered. This paper presents an experimental investigation of various material contact pairs to obtain the friction parameters of the Benson exponential friction model for impact simulation. The Coulomb friction model has limitations for impact analysis because of singularity at zero velocity. Metal/nonmetal materials are prepared, and friction tests are conducted for various sliding speeds, loads, and lubrication conditions. The obtained data are used in the friction model to implement finite element analysis. The parameters of the friction model are obtained by the curve-fitting method. The experimental results show that the friction coefficient with metal/nonmetal contact pairs is stable regardless of the working conditions. The friction model used in this study can also be applied for finite element analysis of the crash conditions, where the friction changes abruptly at the contact interface; the obtained friction parameters are also expected to be more accurate with more precise tests under different working conditions. These results can help improve the accuracy of the finite element analysis.

• Structural Engineering and Mechanics
• /
• v.6 no.1
• /
• pp.95-113
• /
• 1998

The extensive use of honeycomb sandwich structures has led to the need to understand and analyze their low velocity impact response. Commercially available finite element software provides a possible analysis tool for this type of problem, but the validity of their material properties models for honeycomb materials must be investigated. Three different problems that focus on the effect of differences in honeycomb material properties on static and dynamic response are presented and discussed. The first problem considered is a linear elastic static analysis of honeycomb sandwich beams. The second is a nonlinear elastic-plastic analysis of a circular honeycomb sandwich plate. The final problem is a dynamic analysis of circular honeycomb sandwich plates impacted by low velocity projectiles. Results are obtained using the ABAQUS final element code and compared against experimental results. The comparison indicates that currently available material properties models for honeycomb materials can be used to obtain a good approximation of the behavior of honeycomb sandwich structures under static and dynamic loading conditions.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.4
• /
• pp.467-473
• /
• 2017

In this paper, impact characteristics of a water entry gliding vehicle were analyzed using a finite element method. To guarantee the validity of analysis results, a convergence test was performed for several ratios of Euler and Largrange mesh sizes. The impact coefficient was calculated with respect to entry angles and angle of attacks. It can be observed that the impact coefficient was large at a high cross-section gradient and was also affected by cavitation. This study could be useful in the preliminary design stage of a water entry bomb development.

• Composites Research
• /
• v.31 no.5
• /
• pp.215-220
• /
• 2018

In this study, finite element analysis of Carbon-Steel Laminates with different layup pattern was conducted to verify similarity to the results of previous studies and to develop the effective model for low-velocity impact analysis. As in the experiment, Finite element analysis of the Fiber metal laminates (FMLs) with five different lamination patterns was carried out, and the impact resistance of the FMLs was confirmed by comparing the energy absorption ratio. The FMLs showed the higher energy absorption ratio than the mild steel having the same thickness, and it was confirmed that all the FMLs had the high energy absorption ratio over than 96%. In addition, the low-velocity impact analysis model proposed in this study can be effectively used to study composite forms and automotive structures.

• Elastomers and Composites
• /
• v.41 no.1
• /
• pp.40-48
• /
• 2006

Mechanical systems with rubber parts have been used widely in industry fields. The evaluation of the physical characteristics of rubber is important in rubber application. Rubber material is useful to machine component for excellent shock absorbing characteristics. The impact characteristics of rubber were examined by experimental and finite element method. The impact test was conducted with a free-drop type impact tester. The ABAQUS/Explicit was used for finite element analysis. In the finite element analysis, elastic modulus of rubber using impact force was used as dynamic modulus, which are measured and predicted with dynamic property test and WLF model. The analysis result was coincided with the experimental results.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.8
• /
• pp.661-667
• /
• 2004

The characteristics of noise and vibration by a heavy impact source was studied. The triggering method was used for increasing the reliability and stability to measure the level of sound pressure. sound intensity and vibration acceleration. A simple finite element model and a rigid body analysis method were suggested to calculate the natural frequencies of the multi-layer floor system. The results show that the resilient materials decrease the natural frequency of the reinforced concrete slab, make a resonance with dominant driving frequency in the low frequency region, and increase the vibration and noise level. A simple finite element model and rigid body models was suggested to calculate the natural frequencies of the floor systems.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.4 s.70
• /
• pp.373-383
• /
• 2005

The cask is used to transfer the radioactive material in various fields required to withstand hypothetical accident condition such as 9m drop impact in accordance with the requirement of the domestic requlations and IAEA. So far the impact force has been obtained by the finite element method with complex computational procedure. In this study, the dynamic impact response of the cask body is analyzed using the mode superposition method, and the analysis method is proposed. The results we also validated by comparing with previous experimental results and finite element analysis results. The present method Is simpler than finite element method and can be used to predict the global impact response of cask

• Steel and Composite Structures
• /
• v.42 no.3
• /
• pp.325-351
• /
• 2022

This paper studies the lateral impact behavior of ultra-high performance fiber-reinforced concrete (UHPFRC) filled double-skin steel tubular (UHPFRCFDST) columns. The impact force, midspan deflection, and strain histories were recorded. Based on the test results, the influences of drop height, axial load, concrete type, and steel tube wall thickness on the impact resistance of UHPFRCFDST members were analyzed. LS-DYNA software was used to establish a finite element (FE) model of UHPFRC filled steel tubular members. The failure modes and histories of impact force and midspan deflection of specimens were obtained. The simulation results were compared to the test results, which demonstrated the accuracy of the finite element analysis (FEA) model. Finally, the effects of the steel tube thickness, impact energy, type of concrete and impact indenter shape, and void ratio on the lateral impact performances of the UHPFRCFDST columns were analyzed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.2
• /
• pp.52-56
• /
• 2012

Recently, the pedestrian protection regulations of Europe and Japan are becoming more stringent. However, it is difficult to evaluate the performance of protection because each regulation has different test conditions such as dummy, impact speed and so on. In this study, we construct a finite element model of pedestrian lower legform impactor prescribed in EEVC (European Experimental Vehicle Committee) W/G 10, and performed a impact analysis between the impactor and the front end module of vehicle. The simulations are carried out by using LS-DYNA3D, which is a well-known nonlinear dynamic simulation software. The analysis results according to various impact location show the impact characteristics of the lower legform.

• Transactions of Materials Processing
• /
• v.16 no.5 s.95
• /
• pp.370-374
• /
• 2007

A motorcycle helmet is very essential to protect the head of driver and it is directly connected to driver's life. Prior to producing the helmet, it has to be passed the process of impact test to evaluate its safety. This test evaluates peak acceleration and head injury criteria (H.I.C.). This paper simulates the impact test with finite element method to find the behavior of helmet during the test. Also, the effect of impact sites on the helmet was evaluated to improve the thickness distribution of the helmet.