• Structural Engineering and Mechanics
• /
• 제31권6호
• /
• pp.663-678
• /
• 2009

An exact solution is obtained for forced torsional vibration of a finite class 622 piezoelectric hollow cylinder with free-free ends subjected to dynamic shearing stress and time dependent electric potential at both internal and external surfaces. The solution is first expanded in axial direction with trigonometric series and the governing equations for the new variables about radial coordinate r and time t are derived with the aid of Fourier series expansion technique. By means of the superposition method and the separation of variables technique, the solution for torsional vibration is finally obtained. Natural frequencies and the transient torsional responses for finite class 622 piezoelectric hollow cylinder with free-free ends are computed and illustrated.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2731-2736
• /
• 2007

In this paper, incompressible flow over a cylinder near a plane wall using the Immersed Boundary. Finite Difference Lattice Boltzmann Method (IB-FDLBM) is implemented. In this present method, FDLBM is mixed with IBM by using the equilibrium velocity. We introduce IBM so that we can easy to simulate bluff-bodies. With this numerical procedure, the flow past a circular cylinder near a wall is simulated. We calculated the flow patterns about various Reynolds numbers and gap ratios between a circular cylinder and plane wall. So these are enabled to observe for vortex shedding. The numerical results are found to be in good agreement with those of previous studies.

• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.28-38
• /
• 2003

Finite element analysis of cylinder heat/block compound under assembly, thermal and firing condition were performed. FE model including two cylinders with gasket, head bolts, liners and valve seats was used. FE modeling method and boundary conditions were introduced. Stress distribution and deformation of cylinder head and block under each loading condition were presented. Gasket pressure distribution and bore distortion level were predicted. Measured data of bore distortion was compared with the analysis results. The analysis result showed similar trends with the experimental data. High cycle fatigue analysis on the basis of this result has been performed in order to find the critical areas of the engine assembly.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.289-290
• /
• 2003

• 한국소음진동공학회논문집
• /
• 제23권7호
• /
• pp.585-596
• /
• 2013

수치해석과 이전 연구에서 소개된 이론적인 해법을 결합한 하이브리드 방법을 이용하여 양단에 다양한 경계조건을 가진 일정 길이의 후판 실린더의 소음방사 특성을 분석하는 방법을 제시한다. 실린더의 구조적인 진동은 유한요소법을 이용한 수치해석을 통하여 해석하였으며 결과로 얻어진 실린더 표면의 진동변위 분포를 간단한 식으로 이상화하였다. 실린더의 고유진동에 의해 발생되는 소음은 이전 연구에서 소개된 이론적인 해법을 앞에서 구한 이상화된 고유진동 특성에 적용하여 계산한다. 이 결과는 경계요소법을 이용한 해석을 통하여 검증하였다. 이 결과를 바탕으로, 이 연구에서 제시된 이론적인 해법들이 다양한 형태의 경계조건을 가진 유한한 길이의 실린더에서 방사되는 소음 계산에 충분한 정확도를 가지고 있음을 알 수 있다. 이 연구에서 제시된 방법을 적용하면 브레이크 드럼, 모터 하우징 등 여러 종류의 실제 부품들에서 방사되는 소음을 계산할 수 있을 것으로 기대된다.

• 한국음향학회지
• /
• 제38권5호
• /
• pp.511-521
• /
• 2019

본 연구에서는 무한 유체에 놓여있는 유한 길이의 탄성 원통 쉘에 외부에서 비스듬히 평면파가 입사할 때 발생하는 음향 산란 현상을 이론적으로 연구했다. 유한 길이의 원통 쉘에서는 해석적인 산란 해가 존재하지 않기 때문에, Kirchhoff 가정을 적용한 Ye의 산란 기법[Z. Ye, J. Acoust. Soc. Am. 102, 877-884 (1997)]을 사용했다. 탄성 원통 쉘의 특성은 3차원 탄성파 이론을 적용하여 구현했으며 원통 쉘 내부의 유체를 고려했다. 유도된 해석 해를 이용하여 내부 유체가 산란 음장에 미치는 효과, Rayleigh 변수에 대한 산란 음장, 탄성 재질의 변화에 따른 먼 거리 산란 함수를 살펴보았다.

• Wind and Structures
• /
• 제5권2_3_4호
• /
• pp.141-150
• /
• 2002

Numerical simulations based on the ALE finite element method are carried out to examine the aerodynamics of an oscillating circular cylinder when the separated shear flows around the cylinder are stimulated by periodic jet excitation with a shear layer instability frequency. The excitation is applied to the flows from two points on the cylinder surface. The numerical results showed that the excitation with a shear layer instability frequency can reduce the negative damping and thereby stabilize the aerodynamics of the oscillating cylinder. The change of the lift phase seems important in stabilizing the cylinder aerodynamics. The change of lift phase is caused by the merger of the vortices induced by the periodic excitation with a shear layer instability frequency, and the vortex merging comes from the high growth rate, the rapid increase of wave number and decrease of phase velocity for the periodic excitation in the separated shear flows.

• 대한기계학회논문집B
• /
• 제22권12호
• /
• pp.1746-1754
• /
• 1998

A computer program has been developed to predict the heat transfer characteristics and the temperature distribution in the cylinder block of a 4-cylinder, 4-stroke engine. The finete element method is employed to handle the complex geometries associated with the practical cylinder block. The hexahedron finite element is used for a mesh generation of three-dimensional domain. The present numerical procedure has been validated with the measured temperature at several locations of cylinder block. The heat transfer characteristics of engine cylinder block is systematically analyzed for various engine speeds and loading conditions.

• 한국자동차공학회논문집
• /
• 제5권3호
• /
• pp.147-158
• /
• 1997

This paper presents the analysis technique and procedure of main engine components-cylinder block, cylinder liners, gasket and cylinder head-using the finite element method, which aims to assess mainly the potential of lower oil consumption in a view point of engine design and to decide subsequently the accuracy of engine design which was done. The F.E. model of an engine section consisting of one whole cylinder and two adjacent half cylinders is used, whereby the crankcase is cut off at the block bottom deck. By means of a 3-dimensional F.E. model-including cylinder block, liners, gasket, cylinder head, bolts and valve seat rings as separate parts a linear analysis of deformations and stresses was performed for three different loading conditions;assembly, thermal and gas loads. For the analysis of thermal boundary conditions also the temperature field had to be evaluated in a subsequent step.

• 한국생산제조학회지
• /
• 제18권5호
• /
• pp.491-497
• /
• 2009

Of all of pneumatic components utilized in the make up of pneumatic circuits on either automatic assembly machine or industrial equipment, the pneumatic cylinder is more oriented toward being a structural as well as a pneumatic member. The structural design must be based to a large degree on the end of application of the cylinder on the equipment it is operating. In this paper, design studies of a double-acting pneumatic cushion type cylinder with low-friction and high-speed driving have been developed. Of interest here is to investigate the stress and strain analysis of cylinder tube, piston rod, end cover, and to analyze the buckling of piston rod. A finite element analysis is carried out to compute the distribution of the displacement, stress and safety factors by using ANSYS. As a result, the structural safety factors of each parts in pneumatic cushion cylinder are evaluated and confirmed at the design specifications.