• 한국염색가공학회지
• /
• 제19권6호
• /
• pp.28-34
• /
• 2007

The optical and physical properties of alkyl-substituted anthraquinoid dyes were investigated in terms of dyeing of pure polypropylene fiber. The length of alkyl substituents of the dyes did not affect the molar extinction coefficient and maximum absorption wavelength of them. The use of a double-tailed cationic surfactant, didodecyldimethylammonium bromide(DDDMAB), could make the hydrophobic dyes dispersed in water effectively. As the amount of DDDMAB increased, the average particle size of dye dispersion decreased. Maximum color strength of the fabrics was shown in the case that 1.5 molar ratio of DDDMAB was used. As for the fastness properties, commercially acceptable result was obtained in general.

• 한국염색가공학회지
• /
• 제24권2호
• /
• pp.131-137
• /
• 2012

para-Aramid fibers were treated by low-temperature plasma to improve the adhesion. The surface of para-aramid fibers were treated with gaseous plasma of several discharge power and treatment time in oxygen gas at 1Torr pressure. The treated fibers at low-temperature plasma were taken oxygen-containing functional groups and micro-crator on the surface. The modified fibers were measured by dynamic contact angle analyzer and XPS(X-ray photoelectron spectroscopy). The Interfacial adhesion properties of aramid fabric and polyurethane resin were determined by T-peel test. The surface of aramid fibers were observed by FE-SEM photographs. It was found that surface modification and chemical component ratio of the aramid fibers were improved wettability and adhesion characterization.

• 한국염색가공학회지
• /
• 제24권2호
• /
• pp.145-151
• /
• 2012

Polymer alloys of poly(ethylene terephthalate)(PET) and nylon6(PA6) which were not miscible each other by themselves were successfully prepared through melt compounding using a twin-screw extruder by utilizing epoxy as reactive compatibilizer. At the epoxy(DGEBA) amount of 0.5~2wt%, the domain size(average diameter) of the discontinuous phase could be reduced up to 0.2${\mu}m$ from 1-5${\mu}m$ that of the simple blend without epoxy. The reaction was presumed to happen mostly at interphase from the result of maximum increase of melt viscosity at the middle range of PET/PA6 blend ratio. It is expected that alloy fibers of PET/epoxy/PA6 with enough mechanical strength for use can be prepared.

• 한국실내디자인학회논문집
• /
• 제15권6호
• /
• pp.150-158
• /
• 2006

The purpose of this study is to evaluate environment-friendly planning feature in Environment-friendly Certificated apartments and to use the basic planning data of housing. Seven Environment-friendly Certificated apartments have been analyzed. The findings of this study are as follows: Environment-friendly planning features are categorized into 4 items; floor planning feature, material planning feature, universal planning feature and environmental planning feature. Among floor planning features, natural sunlight, built-in closets, and differentiated floor plans are well considered, but the flexible floor plan for resident's lifestyle and green space are lack. Among material planning features, environment-friendly finishing materials, environment-friendly products and energy-efficient double-pane windows are well considered, but implementation for resource savings using recycled materials are lack. Among universal design planning features, removal of threshold and installation of safety device in bathroom are not well considered. Among environmental planning features, usage of alternative energy like solar energy are not applied. The environment-friendly planning features in interior space should be introduced in diverse ways.

• 건축역사연구
• /
• 제24권1호
• /
• pp.41-50
• /
• 2015

This study aims to investigate the physical characteristics and architectural ornaments of the walls (DamJang) and their bordering area that defines the Rear Garden of Changdeok-gung, one of the Royal Palaces in Seoul. This area, centered on Buyong-ji(부용지) and Aeryeon-ji(애련지), features the morphological diversity of buildings, walls, gates and stone bases in the palace. The findings are summarized as follows: First, DamJang, as a basic architectural element for the space organization, takes a set of various forms featuring different construction materials while responding positively to the physiographic nature of the surroundings; Second, DamJang along with their gates, also features different types of ornamental expressions which also suggest the hierarchy of its building and space; Third, typical of the traditional garden design in Korea are a group of DamJang standing as independent structures mostly around Buyong-ji and Aeryeon-ji whose finishing conditions also differ based on the nature of the space; Fourth, among commonly observed examples of DamJang in the Rear Garden and Changdeok-gung palace-wide, is a 'T' shaped wall whose heights and materials function as a design element for the garden.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2005년도 춘계학술발표대회 논문집
• /
• pp.255-256
• /
• 2005

For the students who specialize in interior design irrespective of their color susceptibility, it is prerequisite to precede a systematic curriculum in the first place on how to put the color theory to practical use. Therefore, this curriculum has its purpose to let the students study on how to put to practical use of their understanding of color as one of the finishing materials for interior design. The 16-weekschool days has been segmented into a theoretical study and practical training, This thesis has summed up the basic instance of the color theory, the first of the three basicpractical courses and presented its results to the students. In due course of this curriculum, the students were recommended to pick up one photo image of their selection out of which they could make out color palette based on their analysis of the photo image, so that they could study on how to apply their color palette to a three dimensional space. Firstly, through this course, they could experience the process for a color image that they had so far sensed subjectively and vaguely to become an objective inevitable result. Secondly, they studied on the process of how a two-dimensionalcolor image could be applied for a three-dimensional space. It is significant of this curriculum in the sense that the students become prepared through this study course with essential knowledge applicable to various interior designs in their future.

• 한국염색가공학회지
• /
• 제17권6호
• /
• pp.27-35
• /
• 2005

Conventional pad- dry-cure(thermo-fixation) process usually produces functional performance on both sides of a fabric. UV curing technique was applied to impart water- and oil-repellent finish effective only on the face of a PET knitted fabric. The preferential one-side coating, by virtue of the limited penetration of UV light, was achieved by W curing after padding of a fluorocarbon agent without special coating or printing equipments. The difference in the functional property of face and back sides was examined by measuring water and oil repellency at each side of the treated fabric. The influence of pre/post-irradiation dose and agent concentration on the performance of the finished fabrics were investigated. While increase in both resin concentration and post-irradiation did not have significant effect on the finish, UV pre-irradiation of PET fabrics caused remarkable influence presumably due to appropriate surface modification of PET fabrics required for facile wetting of the resin. The dimensional stability and color change of the UV cured fabrics measured by FAST and reflectance spectrophotometry showed significantly decreased color difference and increased percent extension compared with the samples pre-irradiated without agent application.

• 한국염색가공학회지
• /
• 제16권5호
• /
• pp.42-47
• /
• 2004

The main objective of this work is to develop melt-blown nonwoven fabric composite materials have electromagnetic shielding characteristics using thin copper film. Melt-blown nonwoven fabric is the matrix phase and thin copper films are the reinforcement of the composite materials. Thin copper films are incorporated as conductive fillers to provide the electromagnetic shielding property of the melt-blown nonwoven fabric. The width and interval of thin copper films in the nonwoven fabric are varied by changing 1, 3, 5 mm for thin copper film's width and 1, 3, 5 mm for thin copper film's interval. The shielding effectiveness(SE) of various melt-blown nonwoven fabrics is measured in the frequency range of 50 MHz to 1.8 GHz. The variations of SE of melt-blown nonwoven fabric with width and interval of thin copper films are described. Suitability of melt-blown nonwoven fabric for electromagnetic shielding applications is discussed. The results indicate that the melt-blown nonwoven fabric composite material using thin copper film can be used for the purpose of electromagnetic shielding.

• 한국염색가공학회지
• /
• 제24권4호
• /
• pp.281-287
• /
• 2012

Poly(phenylene sulfide) films containing acetophenone as a photoinitiator were photocrosslinked under UV irradiation using a continuous UV irradiator. The gel fraction of the irradiated PPS in 1-Chloro naphthalene reached 94.7% with increasing UV energy and the photoinitiator concentration in the film upto $200J/cm^2$ and 12wt% respectively. Solid state $^1C$ NMR analysis suggested that the crosslinking occurred between the phenylene chains in PPS, indicating that the acetophenone may the phenylene hydrogens and subsequently adjacent polymer radicals could be recombined to form the crosslinked structure. The crosslinking improved the thermal behavior of PPS such as loss of $T_g$ and $T_c$, higher melting point and lower melting enthalphy as well as significantly higher peak pyrolysis temperature as much as $63.5^{\circ}C$. Surprisingly the tensile toughness of the most crosslinked PPS increased by 842%, resulting from the substantial enhancements in tensile modulus, strength and strain as much as 76%, 236% and 240% respectively. Also dynamic mechanical measurement indicated that the distance between crosslinks in the crosslinked PPS reached 85.3 g/mol corresponing to a crosslink density of 0.012 mol/g.

• 한국염색가공학회지
• /
• 제25권3호
• /
• pp.206-214
• /
• 2013

There has been an increasing demand for high performance and energy-saving of blind. In order to develop the eco-friendly blind textiles, heat treatment process has been utilized for LM(Low Melting) polyester fabrics and the changes of the physical properties of the treated fabrics were examined according to temperature of heat treatment. Morphology, surface reflectance, contact angle, luster, thermal property and mechanical property of heat treated LM polyester fabrics were investigated. As results, morphology analysis of thermal treated fabrics confirmed that degree of fusion of LM polyester yarns improved with increase of temperature. Surface reflectance of thermal treated fabrics decreased with increase of temperature. Luster and contact angle of a water droplet on thermal treated fabrics increased slightly with increase of temperature. The mechanical properties of the fabrics by KES-FB system were found to be temperature-dependent and especially, bending and shear properties among them were highly related to temperature.