• The Korean Journal of Cytopathology
• /
• v.7 no.1
• /
• pp.107-110
• /
• 1996

Cytologic findings of 2 cases of metastatic leiomyosarcoma diagnosed by fine needle aspirtion cytology are reported. Case 1 is pleomorphic leiomyosarcoma which had metastsized to the liver from the stomach of a 54-year-old male patient. The cytologic features showed highly cellular aspirates with nuclear pleomorphism and interlacing pattern. Case 2 is low grade leiomyosarcoma that occurred in the uterus of a 43-year female patient and metastsized to both lungs. The aspirates were less cellular than that of case 1, and showed spindle cells with minimal pleomorphism, but ceil block revealed interlacing patterns of smooth muscle cells with occasional mitosis.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11a
• /
• pp.216-225
• /
• 2003

Fine particles with aerodynamic diameter less than 2.5 ${\mu}m$ (PM2.5) were collected from three sites in Beijing during April, August, and November 2000 and January 2001. After chemical components in samples are analyzed, a chemical mass balance (CMB) receptor model using PARs as tracers is applied to quantify the source contributions to PM2.5 in Beijing. The results show that the major sources are coal combustion, fugitive dust, vehicle exhaust, secondary sulfate and nitrate, and organic matter while biomass burning and construction dust contribute only a small fraction. In addition, source inventory in Beijing is used to determine the primary source contributions. The two methods result in comparable results. Source apportionment at three sampling sites presents similar contributions to PM2.5 although the sites are far away from each other. However, distinct seasonal pattern is presented for the source contributions from coal combustion, fugitive dust, biomass burning, secondary sulfate and nitrate.

• The Korean Journal of Cytopathology
• /
• v.5 no.1
• /
• pp.41-45
• /
• 1994

Most common metastatic tumors of the thyroid gland are squamous cell carcinoma of head and neck region, adenocarcinoma of breast and lung, malignant melanoma, and renal cell carcinoma of kidney in order of frequency. Metastasis from gastrointestinal tract to the thyroid gland rarely occurs. We experienced a case of fine needle aspiraton cytology of metastatic adenocarcinoma of both thyroid glands from the colon. Cytologic smears showed picket-fence like arrangement of nuclei of carcinoma cells and syncytial type of tissue fragments with acinar pattern on necrotic or mucoid background.

• The Korean Journal of Cytopathology
• /
• v.17 no.1
• /
• pp.69-74
• /
• 2006

Alveolar soft part sarcoma (ASPS) is a rare soft tissue sarcoma, which occurs predominantly in adolescents and young adults. The cytological characteristics of this condition have been described only rarely in the literature. Here, we report a case of alveolar soft part sarcoma. A 28-year-old man presented with a mass in his right buttock, which had persisted for three years. The mass was subjected to a fine needle aspiration cytology (FNAC). The smears were cellular. The observed tumor cells were round or polygonal, and exhibited vesicular nuclei with prominent nucleoli and finely granular cytoplasm. Naked nuclei were frequently detected. Tumor cells were arranged singularly, but occasionally in a pseudoalveolar pattern.

• International Journal of Advanced Culture Technology
• /
• v.11 no.1
• /
• pp.253-262
• /
• 2023

Chinese traditional patterns, which are part of our national precious heritage, have a long history. Tiger culture plays a very important role in folk art. In modern society, it is a symbol of human spirit and morality. The tiger pattern is also a unique traditional pattern in Chinese folklore. From the Spring and Autumn period to modern society, the tiger pattern has evolved in form through thousands of years of development. It is also a representative intangible cultural heritage in contemporary times. It plays a special role in the cultural exchange of different regions, resulting in the generation of the creation of folk art with great local characteristics. Therefore, traditional tiger patterns are an important part of traditional Chinese folk culture and art. In this study, by analyzing the development and evolution history of Chinese traditional tiger patterns, the application methods of Chinese traditional tiger patterns were summarized, the rich cultural connotation, artistic characteristics and application of traditional tiger pattern in modern fashion design were discussed. In contemporary design, the new and improved tiger pattern styles were explored, intangible cultural heritage was interpreted and inherited, and the cultural and artistic values contained therein were extracted. The author combined with modern fashion design, according to people's aesthetic taste and design principles, it is recreated,so that the traditional pattern has certain characteristics of The Times.But at the same time it retains its original character,and the traditional tiger pattern was inherited and the cultural connotation of clothing design was enriched.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.3 s.180
• /
• pp.102-109
• /
• 2006

Several methods for PCB pattern inspection have been tried to detect fine detects in pad contours, but their low detection accuracy results from pattern variations originating from etching, printing and handling processes. The adaptive inspection algorithm has been newly proposed to extract minute defects based on movable segments. With gerber master images of PCB, vertex extractions of a pad boundary are made and then a lot of segments are constructed in master data. The pad boundary is composed of segment units. The proposed method moves these segments to optimal directions of a pad boundary and so adaptively matches segments to pad contours of inspected images, irrespectively of various pattern variations. It makes a fast, accurate and reliable inspection of PCB patterns. Its performances are also evaluated with several images.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.72-73
• /
• 2012

Metal line을 형성하는 방법에는 그라비아 인쇄, 잉크젯 인쇄, photo 공정 후 박막 증착 공정 등을 많이 사용한다. 본 연구에서는 Micro-imprinting 공정과 DFR photo lithography 공정을 통해 음각의 미세한 pattern을 형성한 후 sputtering과 printing을 이용하여 pattern의 filling을 통해 metal line을 구현하는 것을 목표로 하였다. Pattern을 형성한 후 RIE 공정을 통해 기판 표면의 친수성 처리를 하고, SAM 공정을 통해 코팅 막의 소수성 처리를 하였다. Sputtering과 전면 프린팅 및 건조 후 strip 공정을 통해 metal line을 형성하고, 이에 대한 표면 특성과 전기적 특성을 분석하였다.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.1
• /
• pp.109-120
• /
• 2013

As information-oriented industry has been developed and electronic devices has come to be smaller, lighter, multifunctional, and high speed, the components used to the devices need to be much high density and should have find pattern due to high integration. Also, diverse reliability problems happen as user environment is getting harsher. For this reasons, establishing and securing products and components reliability comes to key factor in company's competitiveness. It makes accelerated test important to check product reliability in fast way. Out of fine pattern failure modes, failure of Electrochemical Migration(ECM) is kind of degradation of insulation resistance by electro-chemical reaction, which it comes to be accelerated by biased voltage in high temperature and high humidity environment. In this thesis, the accelerated life test for failure caused by ECM on fine pattern substrate, $20/20{\mu}m$ pattern width/space applied by Semi Additive Process, was performed, and through this test, the investigation of failure mechanism and the life-time prediction evaluation under actual user environment was implemented. The result of accelerated test has been compared and estimated with life distribution and life stress relatively by using Minitab software and its acceleration rate was also tested. Through estimated weibull distribution, B10 life has been estimated under 95% confidence level of failure data happened in each test conditions. And the life in actual usage environment has been predicted by using generalized Eyring model considering temperature and humidity by developing Arrhenius reaction rate theory, and acceleration factors by test conditions have been calculated.

• The Korean Journal of Cytopathology
• /
• v.11 no.2
• /
• pp.115-119
• /
• 2000

Alveolar soft part sarcoma is a rare soft tissue tumor. Few cases on fine needle aspiration cytology have been reported in the literature. We experienced a case of recurrent alveolar soft part sarcoma of the right thigh diagnosed by fine needle aspiration cytology in a 47-year-old man. Cytologic findings showed single cells and clusters associated with thin wailed vasculature in a distinct pseudo-alveolar pattern. The tumor cells exhibited round or ovoid abundant granular cytoplasm and large pleomorphic nuclei with prominent central nucleoli.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.1
• /
• pp.108-114
• /
• 2005

The generation of fine relics of suspensions is a significant interest as it holds the key to the fabrication of electronic devices. These processes offer opportunities for miniaturization of multilayer circuits, for production of functionally graded materials, ordered composites and far small complex-shaped components. Some novel printing methods of depositing ceramic and metal droplets were suggested in recent years. In an electro-hydrodynamic printing, the metallic capillary nozzle can be raised to several kilovolts with respect to the infinite ground plate or pin-type electrode positioned a few millimeters from the nozzle tip. Depending on the electrical and physical properties of the liquid, for a given geometry, it Is possible to generate droplets in any one of three modes, dripping, cone-jet and multi-jet. In this experiment, an alumina suspension flowing through a nozzle was subjected to electro-hydrodynamic printing using pin-type electrodes in the cone-jet mode at different applied voltages. The pin-type electrodes of 1, 100, 1000${\mu}m$ in diameter were used to form fine ceramic patterns onto the substrates. Various feature sizes with applied voltages and electrode diameters were measured. The feature sizes increased with the electrode diameter and applied voltages. The feature size was as fine as $30 {\mu}m$.