• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2005년도 추계학술발표대회 논문집
• /
• pp.37-41
• /
• 2005

When screen size of the Flat Panel Display (FPD) becomes larger, the traditional photo-lithography using photomasks and UV lamps might not be possible to make patterns on Photo Resist (PR) material due to limitation of the mask size. Though the maskless photo-lithography using UV lasers and scanners had been developed to implement large screen display, it was very slow to apply the process for mass-production systems. The laser exposure system using 405 nm semi-conductor lasers and Digital Micromirror Devices (DMD) has been developed to overcome above-mentioned problems and make more than 100 inches FPD devices. It makes very fine patterns for full HD display and exposes them very fast. The optical engines which contain DMD, Micro Lens Array (MLA) and projection lenses are designed for 10 to 50 ${\mu}m$ bitmap pattern resolutions. The test patterns for LCD and PDP displays are exposed on PR and Dry Film Resists (DFR) which are coated or laminated on some specific substrates and developed. The fabricated edges of the sample patterns are well-defined and the results are satisfied with tight manufacturing requirements.

• Animal cells and systems
• /
• 제16권6호
• /
• pp.479-487
• /
• 2012

Biological attachment device is optimized in insect legs for attachment onto the variety of natural substrate. We have studied the microstructural characteristics of the tarsal appendages in the ladybug Harmonia axyridis using scanning electron microscopy to reveal the attachment system of their legs. The attachment devices are composed of claws and adhesive pads. The claws are connected with pretarsal segment, and their apical diverged hooks are developed to hold rough substrates. In contrast, the adhesive pads have an adhesive function onto smooth surface. The pads are interspersed at the ventral part of each tarsomere, and are composed of two kinds of hairy setae. The discoid tip seta (DtS) has a spoon-shaped endplate usually with a rounded concave structure, whereas the pointed tip seta (PtS) has a pointed tip, usually with a hooked endplate. While the PtS is broadly localized concentrically on the marginal area of both the proximal and distal pads, the DtS can be seen at the central areas of each adhesive pad except for the hind legs. Our findings demonstrate the presence of the direction-dependence pattern of the fibrillar system as well as a functional modification of the tenent setae to achieve proper contact with almost any kind of substrates.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2109-2113
• /
• 2008

As the standard of living is higher, the passengers using public transportations desire better qualities of environment as well as more comfortable indoor environment. In case of train, the passengers' comfort in passenger cabin is one of the most important elements to be competitive with other transport systems. The indoor air quality of the cabin should be managed properly, because many passengers travel for a long time in the small space of $144\;m^3$. For proper management of the air quality, the heating, ventilation and air conditioning (HVAC) system is required for the ventilation of the compartment. To maintain comfortable environment in the compartment, the automatic ventilation system is needed to exchange the indoor air with fresh air or clean indoor air. In this study, we investigated the indoor air quality (PM-10, $CO_2$, and VOCs) in the compartment of train. In addition, type and pattern of PM-10 has been analyzed through the clustering analysis. Based on the analysis, we could found that the fine particulate matters in the compartment can be a serious hazard to human. To control the concentration of PM-10 and $CO_2$ air cleaners were developed. Through this study, it is expected that people who take a train will be in a more comfortable environment.

• 한국콘텐츠학회논문지
• /
• 제3권1호
• /
• pp.9-13
• /
• 2003

이 논문에서는 비디오 영상에서의 블록 모션 측정을 위한 통계학적인 특징에 기반 한 알고리즘을 제안한다. 우선 참조 블록의 통계학적인 특징을 구하고, 이를 참조 블록의 통계적 특징과 정규 시작점 패턴 (SPP) 에 퍼져 있는 블록에서의 특징을 비교하여, SPP에서의 시작점 (SP) 후보를 선택하는 데에 적용한다. 최종적인 SP 들은 SP 후보 들에서의 평균절대차이 (MAD) 값으로 구한다. 마지막으로 기존의 고속탐색 알고리즘인 BBG나 DS 그리고 TSS중 하나를 이용하여 참조블록의 모션 벡터를 최종 SP를 시작점으로 하여 계산하였다. 실험결과는 기대 했던 바와 같이 최종 SP로부터의 시작점들이 전역최소값 (global minimum)에 근접함을 보여 주었다.

• 대한조선학회논문집
• /
• 제42권6호
• /
• pp.583-592
• /
• 2005

The turbulent free surface flow around a self-propelled KRISO 138K LNG Carrier is numerically simulated using the finite volume based multi-block RANS code, WAVIS developed at HRISO. The realizable k-$\varepsilon$ turbulence model with a wail function is employed for the turbulence closure. The free surface is captured with the Level-Set method and body forces are used to model the effects of a propeller without resolving the detail blade flow. In order to obtain an accurate free surface solution and stable convergence, the computations are executed with a proper fine grid refinement around the free surface and with an adoption of implicit discretization scheme for the Level-Set formulation. The computed velocity vectors at the several stations and wave patterns show a good agreement with the experimental results measured at the KRISO towing tank.

• 한국환경과학회지
• /
• 제8권6호
• /
• pp.639-643
• /
• 1999

After analyzing the correlation between air pollution and visibility, TSP and $NO_2$ is responsible for poor visibility in Pusan. After analyzing the correlation between meteorological factors and visibility, general pattern of humidity has clear negative correlation. The variation of wind speed has a positive correlation. In order to investigate the cause of poor visibility in Pusan area, the Andersen sampler and PM-2.5 are used to collect and analyze aerosol. This study was carried out to monitor the visibility using Forward scattering meter and to find out the characteristics and the cause of good visibility case and poor visibility case by measuring and analyzing a variety of parameters, such as particle size distributions, chemical compositions, and meteorological conditions in Pusan. According to the analysis of intensive sampling, $NO_3^-,NH_4^+$ ion concentration increased together with the mass concentration around $0.5\~2.5{\mu}m$ approximately during the case of poor visibility. $NH_4NO_3,\;NH_4Cl,\;and\;NaCl$ were thought to be the major components of fine particles.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.270-270
• /
• 2008

We present details of experimental results in the fabrication of high density line patterns, using imprint technique that can provide a simple and comparatively cost-effective manufacturing means. Barrier array structures for display or interconnects for semiconductor applications were the aims of this study. For pattern fabrication, a polymer layer (Ajinomoto GX-13 dielectric film) with a thickness of 38um that can act as either an insulating or a dielectric layer was laminated on a substrate. Fine tracks were then formed using a patterned stamp under isostatic pressure. The line width was ranged between 10 to 60 mm. A self-assembled monolayer (SAM) of fluorinated alkylchlorosilane [$CF_3(CF_2)5(CH_2)2SiCl_3$] as an anti-sticking layer was coated on the surface of the stamp prior to thermal imprint to improve the de-molding characteristic.

• 한국전기전자재료학회논문지
• /
• 제16권9호
• /
• pp.759-764
• /
• 2003

Recently, CMP (chemical mechanical polishing) technology has been widely used for global planarization of multi-level interconnection for ULSI applications. However, COO (cost of ownership) and COC (cost of consumables) were relatively increased because of expensive slurry. In this paper, we have studied the possibility of recycle of roused silica slurry in order to reduce the costs of CMP slurry. The post-CMP thickness and within-wafer non-uniformity (WIWNU) wore measured as a function of different slurry composition. As an experimental result, the performance of reused slurry with annealed silica abrasive of 2 wt％ contents was showed high removal rate and low non-uniformity. Therefore, we propose two-step CMP process as follows , In tile first-step CMP, we can polish the thick and rough film surface using remaked slurry, and then, in the second-step CMP, we can polish the thin film and fine pattern using original slurry. In summary, we can expect the saying of high costs of slurry.

• 농업과학연구
• /
• 제44권3호
• /
• pp.318-324
• /
• 2017

With the development of next-generation sequencing (NGS), a cutting-edge technology, genotype-by-sequencing (GBS) became available at a low cost per sample. GBS makes it possible to customize the process of library preparation to obtain high-quality single nucleotide polymorphisms (SNPs) in the most efficient way. However, a GBS library is hard to construct due to fine-tuning of concentration of each reagent and set-up. The major reason for this is the presence of undigested genomic DNA (gDNA) owing to the efficiency of different restriction enzymes for different species with unknown reasons. Therefore, this proof-concept study is to demonstrate the unpredictable patterns of enzyme digestion from various plants in order to make the reader aware of the caution needed when choosing restriction enzymes for their GBS library preparations. Indeed, no pattern was found for the digestibility of gDNA samples and restriction enzymes in the current study. We suggest that more data should be accumulated on this matter to help researchers who want to apply GBS technologies in a variety of genetic approaches.

• 한국인터넷방송통신학회논문지
• /
• 제11권4호
• /
• pp.99-104
• /
• 2011

본 논문은 사출성형 제품에 존재하는 여러 가지의 패턴의 결함을 신경회로망을 이용하여 검출하는 방법을 제안하였다. 시스템의 성능을 향상시키기 위하여 룩업테이블을 이용하였고, 기존의 이미지 비교에 의한 방법을 지양하여 결함분류를 위한 신경회로망의 학습표본을 위한 특징점을 추출하고 결함추출과 분류알고리즘을 제안하였다. 총 500개의 사출성형 제품의 패턴에 대하여 신경회로망의 학습을 통하여 약 3%의 제품의 패턴에서 결함을 검출하였고 패턴의 직경에 대한 불량으로 대부분 분류되었다. 제안된 시스템을 이용한 결함 검출 방법은 사출성형 제품의 미세한 패턴을 검출하는 데 시간과 경비를 줄일 수 있는 효과적인 대안으로 기대한다.