• 한국해양학회지:바다
• /
• 제1권1호
• /
• pp.32-45
• /
• 1996

광양만 동부해역의 퇴적과정의 변화를 이해하기 위하여 표층퇴적물 분포 및 시추코어에 대한 저서성 유공충 분석을 실시하였다. 사주지역에 대한 음향측심기를 이용한 결과 POSCO의 준설과 매립으로 인하여 해저지형이 변화되고 사주가 남동 방향으로 확대된 것으로 나타났다. 표층퇴적물의 분포는 섬진강 퇴적물 유입의 영 향을 받는 사주지역에서 사질퇴적상이 우세하고 만의 북동쪽으로 갈수록 세립한 퇴적양상을 보인다. 사주 경계 지역의 저서성 유공충 분포는 온대종인 Ammonia beccarii, Elphidium excavatum, Quinqueloculina lamarckiana우세하게 나타났으며 시추코어의 깊이별 유공충의 개체수 및 균등도의 변화가 적은 것으로 나타났다.

• Journal of the korean society of oceanography
• /
• 제32권3호
• /
• pp.112-119
• /
• 1997

Coastal sediments collected near the Youngkwang Nuclear Power Plant were analysed for major(Al$_2$O$^_3$, Fe$^_2$O$^_3$, MgO, CaO, Na$^_2$O, K$^_2$O, TiO$^_2$, MnO), trace (Ba, Sr, V, Co, Cr, Cu, Ni, Zn, Pb) metal, and P$^_2$O$^_5$ contents. The composition of bulk metals from most stations fits within the range as those in the average crustal and sedimentary rocks, suggesting that the anthropogenic perturbation of these components is insignificant. The abundance and distribution of total contents for the majority of metals in the surface sediment could be explained by the grain size and were associated with mud (<63 ${\mu}$m) contents. However, distributions of Ca, K, Sr and Ba did not have any significant association with the sediment grain size. This may be due to the geochemical coherence among these metals in certain minerals abundant in coarse grained fractions. The distribution of Pb appears to be partly affected by the contribution from aerosol fallout. Using the R'-mode factor analysis, we show that the variance of the metal contents could be explained by four factors which account for 93.7% of the total variance. It appears that texturally controlled and/or sorting factors influenced by fine fraction are the most dominant factors which determine the relative abundance and distribution of metals in the study area.

• 한국물환경학회지
• /
• 제31권4호
• /
• pp.367-376
• /
• 2015

The momentum and kinetic turbulent energy carried by the wind to a stratified lake lead to basin-scale motions, which provide a major driving force for vertical and horizontal mixing. A three-dimensional (3D) hydrodynamic model was applied to Lake Tahoe, located between California and Nevada, USA, to simulate the dominant basin-scale internal waves in the deep lake. The results demonstrated that the model well represents the temporal and vertical variations of water temperature that allows the internal waves to be energized correctly at the basin scale. Both the model and thermistor chain (TC) data identified the presence of Kelvin modes and Poincare mode internal waves. The lake was weakly stratified during the study period, and produced large amplitude (up to 60 m) of internal oscillations after several wind events and partial upwelling near the southwestern lake. The partial upwelling and followed coastal jets could be an important feature of basin-scale internal waves because they can cause re-suspension and horizontal transport of fine particles from nearshore to offshore. The internal wave dynamics can be also associated with the distributions of water quality variables such as dissolved oxygen and nutrients in the lake. Thus, the basin-scale internal waves and horizontal circulation processes need to be accurately modeled for the correct simulation of the dissolved and particulate contaminants, and biogeochemical processes in the lake.

• 한국전자파학회논문지
• /
• 제13권2호
• /
• pp.217-224
• /
• 2002

FDTD 해석법에서 공간적 셀의 크기는 해석의 정확도를 결정하는 중요한 요소이다. 하지만 정확도를 향상시키기 위하여 진의 크기를 줄이게 되면, 해석시간과 기억용량의 증가를 초래하게 되는데 서브 그리딩을 사용하여 이를 해결할 수 있다. 본 논문에서는 관심영역만 세밀하게 해석할 수 있는 3차원 서브 그리딩법을 기술하고 이를 응용하여 몇 가지의 구조를 해석하였다. 제안한 방범의 타당성을 화인하기 위하여 균일 그리딩과 서브 그리딩을 적용하여 특성을 해석하고 그 격과를 비교하였다. 제안한 방법을 사용하였을 경우 동일한 정확도에서 균일 그리딩에 비하여 6배의 해석시간의 줄었고 기억용량은 2.5배 정도 줄어들었다.

• 한국입자에어로졸학회지
• /
• 제13권2호
• /
• pp.43-52
• /
• 2017

Policy direction for the management of air quality in Korea has been on the reduction of the average concentrations of the criteria air pollutants such as sulfur dioxide and fine particles. However, recently, risk based management of air pollutants becomes an important issue. In this study, to develop an effective air quality management policy direction in Korea, (1) the fourth Multiple Air Toxics Exposure Study (MATES IV) carried out in the South Coast Air Quality Management District (SQAQMD) in the USA is reviewed and (2) the results are compared with in these in Seoul and (3) policy directions are suggested. It was found that (1) systematic integrated study comprising of measurement, modeling, emission inventory estimation, and risk assessment was essential to estimate the health risk of air pollutants reliably, (2) cancer risk of diesel particle was dominant over other air pollutants, and (3) health risk based emissions were different from amount based emissions. It was suggested that (1) reducing the exposure from hot spots might important to reduce health risk from air pollutants and (2) an integrated air quality management administration system is important for the efficient management of air pollution.

• 한국지구과학회지
• /
• 제25권1호
• /
• pp.1-9
• /
• 2004

The clay minerals of thirty-four bottom sediments collected from the northwestern continental shelf of the East China Sea have been determined by X-ray diffraction analysis. The clay mineral distribution is mainly controlled by the sediment source and the dominant circulation pattern. The predominant clay mineral in our study area is illite comprising more-than 70% of whole clay fraction. The highest concentration of illite (>72%) is found in the southeastern offshore parts beyond the reach of terrigenous input from the Cheju Island. It means that these illites are largely transported by the Kuroshio Current from the South China Sea. Smectite is highly concentrated in the northwest middle part and in the outer-shelf mud patch. It seems to be due to the high supply of smectite transported from China where the fine-grained sediments are discharged from the modern and ancient Huanghe River. The relatively high abundance of kaolinite is likely derived from the Changjiang River via Taiwan ·Warm Current. In contrast, the large amounts of chlorite and high chlorite/kaolinite ratios occur in the northwestern are, reflecting the transportation by the Huanghai Sea Coastal Current from the southern Yellow Sea.

• 한국표면공학회지
• /
• 제40권4호
• /
• pp.185-189
• /
• 2007

A scanning electron microscope (SEM) is a complex system, consisting of many sophisticated components. For a systematic characterization, a $2^4$ full factorial experiment was conducted. The SEM components examined include condenser lens 1 and 2 (denoted as A and B, respectively), and Objective lens (coarse and fine-denoted as C and D respectively). A statistical analysis was conduced to investigate factor effects and variations In response surfaces. Among four factors, main effect analysis revealed that A and D were Identified as the dominant factor. Moreover, B showed conflicting effect against C. The $R^2$ of statistical regression model constructed was about 69.6%. The model generated 3D response surface plots facilitated understanding of complex tactor effects.

• 한국기계가공학회지
• /
• 제19권11호
• /
• pp.64-69
• /
• 2020

To determine the effective factors for microparticle blasting with precise sequence position control in the x-axis and y-axis directions, we conducted a statistical experimental analysis of blasted square shapes by considering five condition factors. The control input and output were operated simultaneously by rotation-linear motion conversion and fine particles were blasted onto the aluminum specimen by precise position control driving using multiple execution codes. The micro-driving device used for processing was capable of microparticle blasting and of controlling the system through contact with a limit sensor at high speed and a two-degree-of-freedom driving mechanism. Our experiments were conducted on 1,050 specimens of pure aluminum (containing <1% of other elements). The effects of several factors (e.g., particle and nozzle diameters, blasting pressure, and federate and blasting cycle numbers) on the surface roughness and blasted surface's depth were verified through a statistical experimental analysis by applying the dispersion analysis method. This statistical analysis revealed that the nozzle diameter, the blasting pressure, and the blasting cycle number were the dominant factors.

• 소성∙가공
• /
• 제30권4호
• /
• pp.195-200
• /
• 2021

In this study, we investigated the dominant processing variables that would influence the microstructural development of AA6061 deformed by differential speed rolling (DSR) at ambient temperature. For this purpose, we carried out a series of DSR on the samples to investigate the effects of roll speed ratio, sample rotation, and number of operation under specific rotation. Among these, the condition with a height reduction of 75% at a speed ratio of 1:4 through rotation along rolling direction (RR) displayed the pronounced results of more homogenous matrix-structure and superior mechanical properties than the others tested in this study. This was mainly due to the cross shearing of macro-shear pattern in segment where dynamic recrystallization took place with ease throughout the sample. Thus, an average microhardness value of 101 Hv was obtained in the present sample deformed by 4-pass DSR with RR where macro cross-shearing was effectively applied.

• 대한원격탐사학회지
• /
• 제37권6_2호
• /
• pp.1849-1858
• /
• 2021

본 연구에서는 2011년부터 2020년까지 수원시 내에서 측정한 기상과 미세먼지 농도 자료를 이용하여 월별, 연별 기상과 미세먼지 농도의 변화 경향을 분석하였고, 수원시 미세먼지 농도(PM₁₀, PM_2.5)와 기상 인자(풍속, 기온), 도시공간정보(건물부피비, 도로면적비) 간의 연관성을 조사하였다. 도시대기측정소의 도시공간정보를 산출하기 위해 국토지리정보원과 환경공간정보서비스에서 제공하는 수치지형도의 건물 고도 정보와 세분류 토지피복자료의 도로 정보를 이용하였고, 도시대기측정소를 중심으로 2 km×2 km 영역의 건물 부피와 도로면적을 계산하였다. 기상측정자료를 분석한 결과, 수원시는 주로 서풍과 서북서풍이 우세하게 나타났고, 평균풍속은 봄철에 높았다. 미세먼지 농도는 여름철(7월~9월)에 낮았고 봄철과 겨울철에 비교적 높았다. 연별 추이를 분석한 결과, 대부분의 지점에서 2020년에 미세먼지 농도가 가장 낮았다. 측정 미세먼지 농도는 풍속과 기온과 약한 음의 상관관계를 보였는데, 기온과 PM_2.5 농도의 상관성이 상대적으로 높았다. 6개 도시대기측정소의 PM₁₀, PM_2.5 평균 농도와 도시매개수의 상관성을 조사한 결과, PM₁₀ 농도는 도로 배출이나 건물에 의한 지상 풍속 감소의 영향보다는 외부로부터의 유입 영향을 더 크게 받았고, PM_2.5 농도는 국지적 배출이나 건물에 의한 풍속 감소 영향을 더 크게 받는 것으로 분석된다.