• Explosives and Blasting
• /
• v.22 no.1
• /
• pp.45-56
• /
• 2004

The industrial explosives in Korea have been made and used since 1952. The blasting accidents have increased gradually with the use of explosives. Based on the Police Department and Guns & Explosives Safety Technology Association's researching materials, the blasting accidents between 1988 and 1997 have been investigated and analyzed in this paper. FTA method was applied for the analysis of the blasting accidents which occurred in the tunnels, roads, subways, and various kinds of building construction area. The results show that the majority of the accidents, about 45.7% of the total, are due to the fly rocks. It is similar trend in Japan. The FTA analysis performed on the accidents by fly rocks shows that the major source of the accident is human factors such as non-observance of the safety rules, less knowledge of the safety and so on. The results of the study ate expected to provide basic data for making and observing the safety rules, making and amending the laws concerned and planning the security project. It will be helpful in preventing the blasting accidents and in reducing the loss of valuable lives and the financial damage.

• Journal of the Korean Society of Safety
• /
• v.32 no.6
• /
• pp.29-33
• /
• 2017

In order to solve this sort of electrostatic failure in Display and Semiconductor process, Soft X-ray ionizer is mainly used. Soft X-ray Ionizer does not only generate electrical noise and minute particle but also is efficient to remove electrostatic as it has a wide range of ionization. There exist variable factors such as type of tungsten thickness deposited on target, Anode voltage etc., and it takes a lot of time and financial resource to find optimal performance by manufacturing with actual X-ray tube source. Here, MCNPX (Monte Carlo N-Particle Extended) is used for simulation to solve this kind of problem, and optimum efficiency of X-ray generation is anticipated. In this study, X-ray generation efficiency was compared according to target material thickness using MCNPX and actual X-ray tube source under the conditions that tube voltage is 5 keV, 10 keV, 15 keV and the target Material is Tungsten(W). At the result, In Tube voltage 5 keV and distance 100 mm, optimal target thickness is $0.05{\mu}m$ and fastest decay time appears + decay time 0.28 sec. - deacy time 0.30 sec. In Tube voltage 10keV and distance 100 mm, optimal target Thickness is $0.16{\mu}m$ and fastest decay time appears + decay time 0.13 sec. - deacy time 0.12 sec. In the tube voltage 15 keV and distance 100 mm, optimal target Thickness is $0.28{\mu}m$ and fastest decay time appears + decay time 0.04 sec. - deacy time 0.05 sec.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.6
• /
• pp.525-533
• /
• 2016

The purpose of current tunnel maintenance system in South Korea is safety-based maintenance system for accident prevention, So it is difficult to conduct a strategic maintenance. The development of a new maintenance system can lead to effective investment of limited financial and it's effort is still in progress. In this study, to develop a performance-based assessment method, indexes for assessment are derived taking into account the safety, durability and serviceability. The indexes for performance-based assessment were selected by a literature analysis and a delphi survey. Then the importance among indexes were calculated by the AHP analysis.

• Journal of Korean Society for Quality Management
• /
• v.45 no.4
• /
• pp.781-810
• /
• 2017

Purpose: This paper studied about the integration for management system of representative international standard related to sustainable development. The well-known International standards such as ISO 9001, ISO 14001 and OHSAS 18001 (ISO 45001) can be operated in accordance with the organizational situation individually, or in a variety of ways of integration. It can be applied to help organizations utilizing the newly established "ISO IEC Directive Part1 Annex SL", when integrating quality, environmental and safety & health management systems based on international standards. Methods: We conducted an empirical survey of management executives and experts to study how three factors (management systems, organizational capabilities and integration methods) could affect business performance. Results: The questionnaire was analyzed using AMOS structural equation model. Quality, environmental and safety and health management systems affected management performance, and integration methods of management system affected business efficiency, risk performance and financial performance. Integration method is also important because organizational competence affects various aspects of integrated management. However, factors that affect integration should also be considered in terms of organizational capabilities. This is because organizational capacity influences the integration plan. Conclusion: To integrate the document system at the strategic level, management should actively participate in integrated operations to integrate organizations, eliminate duplicate tasks, and foster document integration experts to reflect the characteristics of individual standard. In the case of document integration, quality management is focusing, but once ISO 45001 is issued, the use of Annex SL is increasing, and Quality, environment and safety & health integration will also be expanded. It is possible to increase the effect of integration by strategically approaching and establishing organization document system rather than simple integration according to management system standard arrangement.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.4
• /
• pp.257-268
• /
• 2017

Objectives: This study was conducted to review the Toxic UseReduction Act of Massachusetts, USA, which has been evaluated as a successfulcase of a chemical reduction policy, and to search for ways to introduce it inKorea. Methods: We analyzed the implementation of the TURA by attending TUR Planning Course of the Toxic Use Reduction Institute in Massachusetts and researching the related literature. Results: As TURA took effect, the use of chemicals in Massachusetts was reduced, and cost savings were achieved in workplaces. The success factors for the legislation are considered to be support form the federal and state governments and the active participation of business and civic group. Domestic efforts to reduce toxic substances have already begun, so if the process of TURA is appropriately applied to domestic legislation of chemicals control, it would be expected to produce visible results. Therefore, we reviewed the 'Act on Chemicals Registration and Assessment', 'Act on Chemical Control' and 'Act on the Integrated Control of Pollutant-Discharging Facilities' and sought solution for applying TURA to each piece of legislation. For the first case, 'Toxic or Hazardous Substance List' and 'Establishment of Toxic Use Fee' is applicable. For the second case, 'Annual Toxic or Hazardous Substance Reports' is applicable. For the third case, 'Toxic Reduction Plans' and 'Toxics Use Reduction Institute and 'Toxic Use Reduction Planners' is applicable. Conclusions: The government should take notice appropriateness for the reduction of toxic chemicals and provide financial support. Businesses should invest in technologies that build trust with local communities, improve productivity, and reduce costs. Finally, civic group should cooperate with government and businesses.

• Journal of Environmental Policy
• /
• v.2 no.1
• /
• pp.107-135
• /
• 2003

This study reviews the proposed liability and redress regime under the Cartagena Protocol on Biodiversity. Several core elements for the regime are discussed in comparison with those listed in the 1999 Basel Protocol on Liability and Compensation for Damage resulting from the Transboundary Movements of Hazardous Wastes and their Disposal. These are (1) scope of the rules and procedures; (2) channeling of liability; (3) legal standing; (4) definition of damage; (5) standard of care; (6) ancillary sources of compensation; (7) limitation of liability; (8) financial guarantees; and (9) mutual recognition and enforcement of judgments. Korea has given relatively little attention to the issue of liability and redress in the context of LMOs trade. As the Protocol is expected to enter into force soon, Korea needs to develop appropriate implementing domestic mechanisms for the Biosafety Protocol. Establishing an adequate domestic liability and compensation scheme will be one of the most important mechanisms not only to comply the Protocol but to ensure safety of LMOs in general. A further research is needed on the basis of a comparision of relevant legislations in different countries as well as analysis of current laws related to the accidents arising from LMOs trade, such as product liability laws, food safety laws, liability provisions in some environmental legislations.

• Journal of the Korean Society of Safety
• /
• v.27 no.2
• /
• pp.92-97
• /
• 2012

Risk management is the process that helps to identify hazards, analyze them, and then to create an action plan to avoid and mitigate these hazards. The main objective of risk management in product development and manufacturing is to provide safe and efficient products without spending too many resources. Medical device manufacturers also face enormous risks - regulatory, legal, and financial - based on their products and processes, and the concepts of risk management are particularly important because any single failure may result in serious damages to body or loss of life. In this regard, a set of guidelines for the application of risk management to medical devices has been issued by ISO and specified in the document ISO 14971 Medical devices - Application of risk management to medical devices. The main objective of this study is to investigate the application of risk management to dental implant development and manufacturing processes based on ISO 14971. A general risk management process is first introduced, and the application of ISO 14971 to dental implants is further investigated.

• Nuclear Engineering and Technology
• /
• v.38 no.1
• /
• pp.11-32
• /
• 2006

System thermal-hydraulic codes have been used in the past decades in the areas of design, operation, licensing and safety of Nuclear Power Plants (NPPs). The development and validation of these codes have reached a high degree of maturity, through the consideration of huge experiments and advanced numerical models. Nowadays, the analyses are based upon realistic approaches rather than the conservative evaluation models. However the applications of these computational tools require preliminary qualification issues. Although huge amounts of financial and human resources have been invested for the development and improvement of codes, the calculation results are still affected by errors. In the sophisticated nuclear technology, design and safety of NPP, these errors must be quantified. An overview of the state of the art of the current thermal-hydraulic system code is developed and the need of uncertainty analysis in code calculations is emphasized. Several sources of uncertainty have been classified and commented, and typical applications of such methods are shown.

• Structural Engineering and Mechanics
• /
• v.43 no.4
• /
• pp.545-560
• /
• 2012

Design codes provide the minimum requirements for the design of code-compliant structures to ensure the safety of the life and property. As for code-exceeding buildings, the requirements for design are not sufficient and the approval of such structures is vague. In mainland China in recent years, a large number of code-exceeding tall buildings, whether their heights exceed the limit for the respective structure type or the extent of irregularity is violated, have been constructed. Performance-based seismic design (PBSD) approach has been highly recommended and become necessary to demonstrate the performance of code-exceeding tall buildings at least equivalent to code intent of safety. This paper proposes the general methodologies of performance-based seismic analysis and design of code-exceeding tall buildings in Mainland China. The PBSD approach proposed here includes selection of performance objectives, determination of design philosophy, establishment of design criteria for structural components and systems consistent with the desirable and transparent performance objectives, and seismic performance analysis and evaluation through extensive numerical analysis or further experimental study if necessary. The seismic analysis and design of 101-story Shanghai World Financial Center Tower is introduced as a typical engineering example where the PBSD approach is followed. The example demonstrates that the PBSD approach is an appropriate way to control efficiently the seismic damage on the structure and ensure the predictable and safe performance.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.3
• /
• pp.287-293
• /
• 2010

As an exploratory research to understand the nature of relationships between harbors and their neighboring communities, this study analyzes how harbors influence their residents' quality of life(QOL). The QOL was measured by 18 indicators reconstructed by reviewing relevant literatures. As a result, both Busan and Incheon were found to have statistically significant influence on many of QOL indicators including general expenditure per capita, number of manufacturing factories per capita, rate of housing supply, number of financial agencies per capita, number of cultural assets per capita, number of schools per capita, number of sick-beds per capita, and the size of welfare expenditure per capita.