• Spatial Information Research
• /
• v.18 no.4
• /
• pp.1-11
• /
• 2010

Unlike the previous studies which have focused on 2-dimensional urban characteristics, this paper presents statistical models explaining urban heat island(UHI) effect by 3-dimensional urban morphologic information and addresses its policy implications. 3~dimensional informations of Columbus, Ohio arc captured from LiDAR data and building boundary informations are extracted from a building digital map, Finally NDV[ and temperature data are calculated by manipulating band 3, band 4, and thermal hand of LandSat images. Through complicated data processing, 6 independent variables(building surface area, building volume, height to width ratio, porosity, plan surface area) are introduced in simple and multiple linear regression models. The regression models are specified by Box-Tidwell method, finding the power to which the independent variable needs to raised to be in a linearity. Porosity, NDVI, and building surface area are carefully chosen as explanatory variables in the final multiple regression model, which explaining about 57% of the variability in temperatures. On reducing UHI, various implications of the results give guidelines to policy-making in open space, roof garden, and vertical garden management.

• Korean Journal of Poultry Science
• /
• v.46 no.4
• /
• pp.305-312
• /
• 2019

This study investigated the effect of diet supplementation with pine cone extracts (pine cone ethanol extract: PCEE; pine cone ethanol-hexane extract: PCEHE) on growth performance, digestive organ characteristics and intestinal microbiota of semi-broiler. Twenty two-weeks-old semi-broilers were divided into four dietary groups (n=5/group; control(-): no antibiotics and pine cone extracts; control(+): 2% antibiotics [20 g/kg basal diet]; PCEE: 2% PCEE [20 g/kg basal diet]; PCEHE: 2% PCEHE [20 g/kg basal diet]). Chicks were reared and their diets were supplemented accordingly for 16 days. Final weight, weight gain and feed intake were lowest (P<0.05) in semi-broilers whose diet was supplemented with pine cone extracts, but both PCEE and PCEHE groups showed lower (P<0.05) feed conversion ratios compared to the control(-) group. Gizzard and small intestinal weight were also lower (P<0.05) in both PCEE and PCEHE groups than in the control(-) group. Intestinal length and villus height were similar for all treatments. Furthermore, cecal microbiota was not improved by PCEE and PCEHE supplementation. These findings suggest that diet supplementation with pine cone extracts improves the feed conversion ratio and affects the digestive organ weight of semi-broilers.

• The Journal of Korean Academy of Prosthodontics
• /
• v.28 no.1
• /
• pp.165-191
• /
• 1990

Although a number of studies have been performed to assure that residual stress caused by a mismatch of alloy porcelain thermal expansion can contribute to clinical failure of a ceramometal restoration, the interactive influence of cooling rate on the magnitude of thermal expansion difference and on bond strength between them have not been extensively analyzed. The objective of this study was to determine the influence of cooling rate and the number of firing cycles on the expansion mismatch and the flexural failure resistance of metal porcelain strip. Tested alloys included one Pd-Ag alloy, one Ni-Cr-Be alloy with two kinds of porcelain, Vita and Ceramco. Metal specimens were cast into rods with a height of 13mm and a diameter of 5mm. Subsequently, the castings were subjected to scheduled firing cycles without porcelain. And the porcelain specimens after being fired were trimmed into a bar with a final dimension of $5{\times}5{\times}25mm$. Thermal expansions of the alloys and porcelains were measured by using a push rod or a differential dialometer respecitvely. Porcelain glass transition temperatures and expansion values were derived alloy-porcelain pairs were assessed by comparing expansion values of the components at a porcelain glass transition temperature. Calculations were made using combinations of a Ni-Cr alloy or Pd-Ag alloy with each of two porcelain products. Metal-porcelain strip specimens were subjected to four point loading in an Instron testing machine until crack occured at the metal-cramic interface at the time of sharp decrease of load on recorder. On the basis of this study, the following conclusions may be stated: 1. Regardless of the kinds of ceramometal combinations, both of calculated and experimental data revealed that the double fired specimens exhibited a significantly lower flexural strength. 2. By the rise of the amount of mismatch, bond strength were decreased. 3. Thermal expansion value of Pd-Ag alloys were higher than that of Ni-Cr alloys. 4. Expansion curves of metal were proportional to the increase of temperature and were not affected by the experimental conditions, however porcelains did not show the same magnitude of metal, and a shift of the glass transition temperature to higher temperatures was observed when cooled rapidly 5. Alloy-porcelain thermal compatibility appeared more dependent on the porcelain than the alloy.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.4
• /
• pp.375-379
• /
• 1986

A culture experiment of the ark shell, Anadara broughtonii, one of the edible clams, was carried out in Yoja Bay located at the south ern coast of Korea to find the state of growth and any problems which influence them. Seed shells at an average length of 2.5cm and a weight of 2.5g were planted on bottom mud with a density 20 to 40 shells per square meter on March 10 and 11, 1982. Shell length, shell height, shell breadth, meat weight (wet weight), and total weight for six months from August 1982 to February 1983 were measured to find their state of growth. At the same time, the survival rate was investigated during the whole culture period through December 1983 when they were harvested. Growth, on the whole, was fast when water temperature was high. For a year, an average shell length and total weight attained to 6.1 cm and 63.0g respectively and meat weight was gained to 19.5g. It showed that the state of growth was favourable. Shell shape became round from the oval ana meat weight increase was faster than shell growth as time goes by regardless of water temperature while both shells and total weight increased faster during high temperature. A month after seed shells were planted, about $30\%$ of them was dead and a high mortality, say $5\%\;to\;8\%$ per month, was kept till September. It dropped to around $2\%$ aften divers eliminated starfish, Asterias spp., in August. Thereafter, the rate maintained through December. In all, the final survival rate was about $10\%$ at the time of harvest in December 1983. It was caused mainly by starfish predation. Therefore, a best way for satisifactory culture is seemed to find a way to get rid of the starfish.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.2
• /
• pp.113-118
• /
• 2014

So many nationwide drinking water treatment plants are under much difficulties by new reinforced discharged effluent standards. Generally, the sludge at thickener should be retended for a long time during usual days. Sometime, the soluble manganese and chloroform may be formed under the anaerobic condition in the sludge thickener when the sludge retention time is longer with low turbidity. This phenomenon results in difficulties to keep regulatory level of the discharged effluent. It was necessary to improve the operation conditions and process itself in order to meet water quality standard recently reinforced. For an effort to overcome the problems, a sludge aeration was successfully implemented into the thickening process. Sludge aeration prevent particle oxidated Manganese eluting soluble de-oxidated Manganese, excrete formated Chloroform from effluent to air, and improve sludge settling through homogenized sludge particle. We aerated sludge at the conventional water treatment plant, measured Manganese and Chloroform of clarified water at upper sludge, and solid-fluid interface height of sludge in mass cylinder. As a result, contaminant's concentrations of the final effluent was much decreased : 41% of manganese, approximately 62% of chloroform and 35% of sludge volume, compared with non-aeration sludge.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.97-97
• /
• 2009

The use of thin plate increases due to the need for light weight in large ship. Thin plate is easily distorted and has residual stress by welding heat. Therefore, the thin plate should be carefully joined to minimize the welding deformation which costs time and money for repair. For one effort to reduce welding deformation, it is very useful to predict welding deformation before welding execution. There are two methods to analyze welding deformation. One is simple linear analysis. The other is nonlinear analysis. The simple linear analysis is elastic analysis using the equivalent load method or inherent strain method from welding experiments. The nonlinear analysis is thermo-elastic analysis which gives consideration to the nonlinearity of material dependent on temperature and time, welding current, voltage, speed, sequence and constraint. In this study, the welding deformation is analyzed by using thermo-elastic method for PCTC(Pure Car and Truck Carrier) which carries cars and trucks. PCTC uses thin plates of 6mm thickness which is susceptible to welding heat. The analysis dimension is 19,200mm(length) * 13,825mm(width) * 376mm(height). MARC and MENTAT are used as pre and post processor and solver. The boundary conditions are based on the real situation in shipyard. The simulations contain convection and gravity. The material of the thin block is mild steel with $235N/mm^2$ yield strength. Its nonlinearity of conductivity, specific heat, Young's modulus and yield strength is applied in simulations. Welding is done in two pass. First pass lasts 2,100 second, then it rests for 900 second, then second pass lasts 2,100 second and then it rests for 20,000 second. The displacement at 0 sec is caused by its own weight. It is maximum 19mm at the free side. The welding line expands, shrinks during welding and finally experiences shrinkage. It results in angular distortion of thin block. Final maximum displacement, 17mm occurs around welding line. The maximum residual stress happens at the welding line, where the stress is above the yield strength. Also, the maximum equivalent plastic strain occurs at the welding line. The plastic strain of first pass is more than that of second pass. The flatness of plate in longitudinal direction is calculated in parallel with the direction of girder and compared with deformation standard of ${\pm}15mm$. Calculated value is within the standard range. The flatness of plate in transverse direction is calculated in perpendicular to the direction of girder and compared with deformation standard of ${\pm}6mm$. It satisfies the standard. Buckle of plate is calculated between each longitudinal and compared with the deformation standard. All buckle value is within the standard range of ${\pm}6mm$.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.1
• /
• pp.61-67
• /
• 2017

This experiment was conducted to obtain information of feed value and fermentative quality of wheat cultivar, 'Taejoong' to confirm availability as a whole crop silage. As a result, the heading date of 'Teajoong' is April 27, and plant height is longer than whole crop barley, 'Youngyang' or whole crop wheat, 'Cheongwoo', spike length are also large, fresh and dry matter yield are also high. In case of feed value, 'Taejoong' had higher crude protein content than whole crop barley, 'Youngyang' or whole crop wheat, 'Cheongwoo', lower NDF and ADF contents, and significantly higher digestible nutrient contents(p<0.05). In case of fermentation qulity, pH of 'Taejoong' was 4.2, and lactic acid content was lower than 'Cheongwoo' silage and significantly higher than 'Youngyang' silage(p<0.05). Acetic acid content was significantly lower than 'Youngyang' and 'Cheongwoo' silage(p<0.01), butyric acid content was significantly lower than that of 'Youngyang' silage (p<0.05). The final Flieg's score showed that 'Taejoong' silage was the best. Also income of 'Taejoong' improved than 'Youngyang' or 'Cheongwoo'. Therefore, 'Taejoong' is considered sufficiently available as whole crop for forage.

• Journal of Animal Science and Technology
• /
• v.62 no.1
• /
• pp.21-30
• /
• 2020

This study was conducted to evaluate effects of dietary protease (PR) on growth performance, nutrient digestibility, and intestinal morphology of weaned pigs. A total of 75 weaned pigs [7.06 ± 0.18 kg of average body weight (BW); 28 day old] were randomly allotted to 3 dietary treatments in a randomized complete block design (blocks = BW and sex): a diet based on corn and soybean meal to meet the requirement of crude protein (CP) as a positive control (PC; CP = 24.49%), a low protein diet as a negative control (NC; CP = 22.51%), and NC + 0.02% PR. The PR used in this study was a commercial product containing 75,000 protease units/g derived from Nocardiopsis prasina produced in Bacillus licheniformis. Pigs were fed the dietary treatments for 6 weeks and the diets containing 0.2% chromic oxide for the last week of this study. Blood, feces, ileal digesta, and ileum samples were collected from randomly selected two pigs in each pen on respective time points. Measurements were growth performance, apparent ileal digestibility (AID) and apparent total tract digestibility (ATTD) of dry matter (DM), CP, and energy, frequency of diarrhea, packed cell volume (PCV), and ileal morphology of weaned pigs. Pigs fed PC and PR had higher (p < 0.05) final BW, average daily gain (ADG), and gain to feed ratio (G:F) during overall experimental period than those fed NC. Pigs fed PC and PR had higher (p < 0.05) AID or ATTD of DM, CP, or energy than those fed NC. Moreover, pigs fed PR had higher ratio between villus height and crypt depth (p < 0.05) and number of goblet cells (p < 0.05) than those fed NC. Addition of PR decreased (p < 0.05) frequency of diarrhea for the first two weeks after weaning compared with PC and NC. In addition, pigs fed PR had lower (p < 0.05) PCV on d 14 after weaning than those fed PC and NC. In conclusion, addition of PR in nursery diets with a low protein level significantly improved growth performance, nutrient digestibility, and intestinal morphology of weaned pigs.

• Journal of Bio-Environment Control
• /
• v.6 no.2
• /
• pp.80-85
• /
• 1997

This study was conducted to select useful medium material as a replacement for the rockwool in long term bag-culture of sweet pepper. The sole use of perlite and carbonized rice hull(CRH) as well as their mixture with various combinations were compared to the rockwool. The results are summarized as the followings : 1. Plant height and number of leaves did not significantly differ among media. However, in the mixture of CRH(1) : Perlite(1), stem diameter was thicker; plant weight and root weight were heavier, and T/R ratio was lower. 2. Although fruit length and number of fruits did not significantly differ among media, the mixture of CRH(1) : Perlite(1) provided longer fruit length, more fruits, heavier fruit weight, and greater yield. 3. Monthly yield was continuously increased from the first harvest in November to the harvest in May next year. The amount of increase in the fruit yield of the mixture of CRH(1) : Perlite(1) from the first harvest to the final harvest was significantly greater than the amount of increase of other media. 4. The amount of total nitrogen and phosphate was higher in mixture of CRH (1) : Perlite(1), while the amount of other elements did not significantly differ among mixtures.

• Nuclear Engineering and Technology
• /
• v.46 no.4
• /
• pp.547-556
• /
• 2014

Korea expects a shortage in storage capacity for spent fuels at reactor sites. Therefore, a need for more metal and/or concrete casks for storage systems is anticipated for either the reactor site or away from the reactor for interim storage. For the purpose of interim storage and transportation, a dual purpose metal cask that can load 21 spent fuel assemblies is being developed by Korea Radioactive Waste Management Corporation (KRMC) in Korea. At first the gamma and neutron flux for the design basis fuel were determined assuming in-core environment (the temperature, pressure, etc. of the moderator, boron, cladding, $UO_2$ pellets) in which the design basis fuel is loaded, as input data. The evaluation simulated burnup up to 45,000 MWD/MTU and decay during ten years of cooling using the SAS2H/OGIGEN-S module of the SCALE5.1 system. The results from the source term evaluation were used as input data for the final shielding evaluation utilizing the MCNP Code, which yielded the effective dose rate. The design of the cask is based on the safety requirements for normal storage conditions under 10 CFR Part 72. A radiation shielding analysis of the metal storage cask optimized for loading 21 design basis fuels was performed for two cases; one for a single cask and the other for a $2{\times}10$ cask array. For the single cask, dose rates at the external surface of the metal cask, 1m and 2m away from the cask surface, were evaluated. For the $2{\times}10$ cask array, dose rates at the center point of the array and at the center of the casks' height were evaluated. The results of the shielding analysis for the single cask show that dose rates were considerably higher at the lower side (from the bottom of the cask to the bottom of the neutron shielding) of the cask, at over 2mSv/hr at the external surface of the cask. However, this is not considered to be a significant issue since additional shielding will be installed at the storage facility. The shielding analysis results for the $2{\times}10$ cask array showed exponential decrease with distance off the sources. The controlled area boundary was calculated to be approximately 280m from the array, with a dose rate of 25mrem/yr. Actual dose rates within the controlled area boundary will be lower than 25mrem/yr, due to the decay of radioactivity of spent fuel in storage.