• Clinical and Experimental Pediatrics
• /
• v.61 no.7
• /
• pp.221-225
• /
• 2018

Purpose: Congenital hypothyroidism (CH) is the most common endocrine disorder in children. Thyroid hormone deprivation results not only in mental retardation but also growth retardation. This study investigates the final height (FH) in Korean patients with CH detected by newborn screening and examines factors that may affect the FH. Methods: The medical records of Korean CH patients (n=45) were reviewed. The FH was examined and target height (TH) was calculated based on mid-parental height. The FH z score (FHZ) and TH z score (THZ) were computed using the 2007 Korean National Growth Chart. The FHZ and THZ were compared with a Student t test. The impact of the etiology of CH (athyreosis, dyshormonogenesis, ectopic thyoid, hypoplastic thyroid), initial serum thyroid stimulating hormone (TSH) level, initial free thyroxine (T4) level, and time of therapy initiation based on FH was assessed. Results: The mean FHZ was $0.10{\pm}1.01$ for male patients and $-0.11{\pm}1.09$ for female patients. There were no significant differences between FHZ and THZ for both female (P=0.356) and male patients (P=0.237). No significant relationship was found between FH and the etiology of CH, initial TSH level, initial free T4 level, and the time of therapy initiation. Conclusion: Early intervention and satisfactory management do not appear to impede growth in Korean patients with CH. Thus, early detection and proper management of patients with CH detected by newborn screening program are necessary.

• Journal of Periodontal and Implant Science
• /
• v.43 no.2
• /
• pp.58-63
• /
• 2013

Purpose: The aim of this study was to measure the peri-implant bone length surrounding implants that penetrate the sinus membrane at the posterior maxilla and to evaluate the survival rate of these implants. Methods: Treatment records and orthopantomographs of 39 patients were reviewed and analyzed. The patients had partial edentulism at the posterior maxilla and limited vertical bone height below the maxillary sinus. Implants were inserted into the posterior maxilla, penetrating the sinus membrane. Four months after implant insertion, provisional resin restorations were temporarily cemented to the abutments and used for one month. Then, a final impression was taken at the abutment level, and final cement-retained restorations were delivered with mutually protected occlusion. The complications from the implant surgery were examined, the number of failed implants was counted, and the survival rate was calculated. The periimplant bone lengths were measured using radiographs. The changes in initial and final peri-implant bone lengths were statistically analyzed. Results: Nasal bleeding occurred after implant surgery in three patients. No other complications were found. There were no failures of the investigated implants, resulting in a survival rate of 100%. Significantly more bone gain around the implants (estimated difference=-0.6 mm, P=0.025) occurred when the initial residual bone height was less than 5 mm compared to the >5 mm groups. No significant change in peri-implant bone length was detected when the initial residual bone height was 5 mm or larger. Conclusions: This study suggests that implants penetrating the sinus membrane at the posterior maxilla in patients with limited vertical bone height may be safe and functional.

• Laser Solutions
• /
• v.6 no.1
• /
• pp.1-8
• /
• 2003

A molten metal droplets are deposited onto solid substrate for solid freeform fabrication, Collision dynamic and substrate heat transfer associated with solidification determine the final shape of molten metal droplets. In this study, the experimental model, based on the variational condition with substrate temperature and falling height, was produced reliable optimal data of droplet pattern.

• Journal of Magnetics
• /
• v.4 no.1
• /
• pp.5-9
• /
• 1999

Effect of sulfur segregation on tertiary recrystallization and magnetic induction during final annealing was investigated in a 3% Si-Fe electrical strip containing 6 ppm(LS) and 15 ppm(HS) sulfur. During final annealing, Auger peak height of segregated sulfur on the surface of the strips reached a maximum, and then decreased to low level with increasing annealing time, which is attributed to sulfur segregation and evaporation. The magnetic induction of the thin-gauged 3% Si strip was inversely proportional to the Auger peak height of segregated sulfur on the surface. The overall profile for surface segregation of sulfur and B10 was observed, irrespective of sulfur content in Si-Fe strips, but the peaks of LS strips appeared earlier than those of HS strips. The grain growth rate of the LS strips during final annealing was faster than that of the HS strips, which may be attributed to the pinning effects of segregated sulfur. With increasing final annealing temperature, B10 value increased rapidly and the saturation level in B10 increased.

• Geomechanics and Engineering
• /
• v.24 no.3
• /
• pp.295-305
• /
• 2021

In this study, design charts for estimating consolidation settlement are proposed according to finite strain consolidation theory using a nonlinear constitutive relationship equation. Results of parametric sensitivity analysis shows that the final settlement, initial height, and initial void ratio exerted the greatest effect, and the coefficients of the void ratio-effective-stress. Proposed design charts were analyzed for three regions using a representative constitutive relationship equation that enables major dredged-reclaimed construction sites in Korea. The regional design charts can be calculated accurately for the final settlement because it is applied directly to the numerical analysis results, except for reading errors. A general design chart applicable to all marine clays is proposed through correlation analysis of the main parameters. A final self-weight consolidation settlement with various initial void ratios and initial height conditions should be estimated easily using the general design chart and constitutive relationship. The estimated final settlement using the general design chart is similar to the results of numerical analysis obtained using finite strain consolidation theory. Under an overburden pressure condition, design charts for estimating consolidation settlement are proposed for three regions in Korea.

• Clinical and Experimental Pediatrics
• /
• v.54 no.11
• /
• pp.436-442
• /
• 2011

An anthropometric survey is one of the most important approaches to use when evaluating the health status of children. Secular trends in body sizes, such as height, weight, head circumference, chest circumference, and body mass index showed significant changes over 40 years in Korea. A series of periodic surveys were conducted in 1967, 1975, 1985, 1997, and 2005 by the Korean Pediatric Society and Ministry of Health and Welfare. The quality of data from school health examinations and the Korea National Health and Nutrition Examination Survey has improved, so we can use them now as resources for anthropometric analysis. The final height differences between 1965 and 1997 were 4.5 cm both in boys (168.9 cm in 1965; 173.4 cm in 1997) and girls (155.9 cm in 1965; 160.4 cm in 1997). The differences between 1997 and 2005 were 0.9 cm in boys (174.3cm in 2005) and 0.8 cm in girls (161.2 cm in 2005). There was no difference in final height measurements between 2005 and 2010. An increase in body size at earlier teen ages was pronounced during these decades compared to the previous generation; however, little change has been identified more recently. Body size has been increasing, and obesity has become more prevalent. Systems that gather data should be updated in order to cope with these secular trends. In an upcoming era of secular trends that would be in a slow transition, several surveys that include body measurements should be prepared to meet future needs.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.1
• /
• pp.167-178
• /
• 2000

An experimental study on step up filling method is carried out to reinforce the Yano method which is widely used to estimate volume ratio and self-weight consolidation settlement in reclamation area. This method considers actual reclamation construction in which dredged clay is continuously filled and rising of deposit height is presented as a result of volume decrease by height rising and self-weight consolidation. It measured the relationship between filling velocity and deposit rising velocity; calculated the total filling height which is needed to achieve the planned final deposit height, and its solid height and the time which is taken to finish the planned final deposit height; and on the basis of these calculated parameters, predicted the self-weight consolidation and volume change ratio in reclamation construction. Yano method is also used to predict the same conditions. 29.8% in self-weight consolidation, 31.1% in volume ratio, 40% in void ratio and water content is underestimated in Yano method compared to step up filling method.

• Journal of Welding and Joining
• /
• v.30 no.1
• /
• pp.78-84
• /
• 2012

Due to the inherent dimensional uncertainty, tolerances accumulate in the final assembly. Tolerance accumulation has serious effect on the performance of ECV assembly. This paper proposes a method of tolerance accumulation analysis using Monte Carlo simulation, which includes welding process in assemble process. This method can predict the final tolerance distributions of the completed assembly with the prescribed statistical tolerance distribution of each part to be assembled. With the inclusion of welding, another dimensional uncertainties due to partial melting is to be accounted as well. Partial melting of projection height was included in the tolerance propagation analysis. Verification of the proposed method was performed by making use of Monte Carlo simulation. Monte Carlo simulation results showed promising results in that we can predict the final tolerance distributions in advance before actual assembly process of precision machinery.

• Journal of Korean Foot and Ankle Society
• /
• v.10 no.2
• /
• pp.218-222
• /
• 2006

Purpose: We evaluate the results of subtalar arthroereisis with $Kalix^{(R)}$ implant (Newdeal, Lyon, France) that were performed in painful flatfoot deformity. Materials and Methods: We performed the subtalar arthroereisis on 16 feet of children symptomatic flexible flat feet after more than 6 months of conservative treatment. Average age was 11 years (8-14 years) old. We checked the functional status with AOFAS functional score in pre-operatively and at final follow-up. Radiologically, we took weight bearing anterior to posterior and lateral view of the feet, and measured the talo-$1^{st}$ metatarsal angle, calcaneal pitch angle, cuboid-surface height. Finally, we asked to patient's parents for satisfaction of the surgery. Results: Mean follow up period was 34.1 months. Average AOFAS score improved from preoperatively 71.9 to postoperatively 91.3. Only one patient has subtalar pain. Average lateral $1^{st}$ metatarsal angle reduced from $-18.2^{\circ}$ preoperatively to $-4.6^{\circ}$ at final follow-up. Average anterior to posterior $1^{st}$ metatarsal angle was reduced from $18.9^{\circ}$ preoperatively to $6.5^{\circ}$ at final follow-up. Average calcaneal pitch angle was increased from $8.6^{\circ}$ preoperatively to $12.6^{\circ}$ at final follow-up. Average cuoboid-surface height was improved from 12.1 mm preoperatively to 16.0 mm at final follow-up. All patients had excellent or good satisfaction. Conclusions: Subtalar arthroereisis with $Kalix^{(R)}$ implant is a viable surgical alternative for painful flatfoot deformity of children.

• Journal of Korean Foot and Ankle Society
• /
• v.8 no.1
• /
• pp.101-106
• /
• 2004

Purpose: To determine the efficacy of the SDBBA (Subtalar distraction bone block arthrodesis) procedure on patients with late complication of intra-articular calcaneal fractures including subtalar joint arthritis and anterior ankle impingement syndrome. Materials and Methods: Five cases in which the SDBBA procedure was implemented were followed for more than one year. All five patients were male with an average age of 56. Clinically, the American Orthopedic Foot and Ankle Society (AOFAS) ankle-hindfoot score and the pain score were assessed. Radiographically, the talocalcaneal height and the talar inclination angle were determined. Results: All five patients achieved subtalar joint fusion. The average pre-operative AOFAS score was 22.8 scores (range, 8-32 scores). At last follow-up, these scores improved to an average of 72.4 scores (range, 64-82 scores). The average pre-operative pain score was 8.2 scores (range, 7-10 scores). At last follow-up, these scores improved to an average of 13.2 (range, 12-15 scores). The average pre-operative talocalcaneal height was 72.8 mm (range, 70-77 mm), average post-operative talocalcaneal height improved to 79.8 mm (range, 78-84 mm). At final follow-up, these measurement was slightly decreased to average 78.6 mm (range, 74-83 mm). The average pre-operative talar inclination angle was 13.2 degrees (range, 12-15 degrees), average post-operative talar inclination angle improvedto 19.2 degrees (range, 15-24 degrees). At final follow-up, these measurement was slightly decreased to average 18.6 degrees (range, 12-24 degrees). Four patients achieved successful outcomes. One patient developed a wound infection with subsequent sural neuropathy as well as collapse of the bone graft. Conclusion: This study shows that the SDBBA procedure successfully restores the talocalcaneal height and tibio-talar relationship. This procedure is useful in surgically managed patients with talo-calcaneal height loss and anterior ankle impingement syndrome due to the late complications of calcaneal intra-articular fractures.