• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.180-190
• /
• 2007

The purpose of this study was to evaluate the abrasion resistance of surface penetrating sealant which was applied on a composite resin restoration and to provide proper time to reapply sealant on composite resin surface. Two hundred rectangular specimens, sized $8\times3\times2mm$, were made of Micronew (Bisco, Inc., Schaumburg, IL, U.S.A) and divided into two groups; F group (n = 10) was finished with coarse and medium grit of Sof-Lex discs and BisCoverwas applied B group (n = 190) after finishing with discs. B group was again subdivided into nineteen subgroups From B-1 group to B-18 group were subjected to toothbrush abrasion test using a distilled water-dentifrice slurry and toothbrush heads B-IM group was not subjected to toothbrush abrasion test. Average surface roughness (Ra) of each group was calculated using a surface roughness tester (Surfcorder MSE-1700: Kosaka Laboratory Ltd., Tokyo, Japan) . A representative specimen of each group was examined by FE-SEM (S-4700: Hitachi High Technologies Co., Tokyo, Japan). The data were analysed using cluster analysis, paired t-test, and repeated measure ANOVA. The results of this study were as follows; 1. Ra off group was $0.898{\pm}0.145{\mu}m$ and B-IM group was $0.289{\pm}0.142{\mu}m$. Ra became higher from B-1 group $(0.299{\pm}0.48{\mu}m$ to B-18 group $(0.642{\pm}0.313{\mu}m$. 2. Final cluster center of Ra was $0.361{\mu}m$ in cluster 1 $(B-IM\simB-7)$, $0.511{\mu}m$ in cluster 2 $(B-8\simB-14)$ and $0.624{\mu}m$ in cluster 3 ($(B-15\simB-18)$. There were significant difference among Ra of three clusters. 3 Ra of B-IM group was decreased 210.72% than Ra of F group. Ra of B-8 group and B-15 group was increased 35.49% and 51.35% respectively than Ra of B-IM group. 4. On FE-SEM, B-IM group showed the smoothest resin surface. B-8 group and B-15 group showed vertically shallow scratches , and wide and irregular vertical scratches on composite resin surface respectively. Within a limitation of this study, finished resin surface will be again smooth and glazy if BisCover would be reapplied within 8 to 14 months after applying to resin surface.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.2
• /
• pp.177-186
• /
• 2010

This study was carried out to compare the physicochemical characteristics and preference as a sensory quality of Sogokju (Korean traditional rice wine) from waxy rice varieties. The protein and moisture contents of milled waxy rice varieties were ranged 6.9~7.2% and 12.1~ 12.6%, respectively. Nunbora had the largest grain size. In pasting properties, Hangangchalbyeo had the highest peak, trough and final viscosities, and Dongjinchalbyeo had the lowest viscosity curve. These differences suppose to be caused by the amylopectin(AP) structure: Dongjinchalbyeo has the largest short AP chains (degree of polymerization (DP) 6-12) and the smallest middle AP chains (DP 13-24) in 9 waxy rice varieties, while Hangangchalbyeo has the smallest short AP chains and the largest middle AP chains. The alcohol contents of Sogokju brewed from 9 waxy rice varieties were 17.6～19.9%. The brix degree were ranged $20.5{\sim}23.9^{\circ}Bx$. The organic acid of Sogokju consisted mainly of succinic acid, and the free sugar of it consisted mostly of glucose. The sensory evaluation showed the highest palatability at the Sogokju from Baegseolchalbyeo. The palatability was positively correlated with the brix degree, the glucose content, and the turbidity, and negatively correlated with the production yield of Sogokju.

• Journal of Korea Technology Innovation Society
• /
• v.12 no.4
• /
• pp.788-818
• /
• 2009

Renewable energy refers to solar energy, biomass energy, hydrogen energy, wind power, fuel cell, coal liquefaction and vaporization, marine energy, waste energy, and liquidity fuel made out of byproduct of geothermal heat, hydrogen and coal; it excludes energy based on coal, oil, nuclear energy and natural gas. Developed countries have recognized the importance of these energies and thus have set the mid to long term plans to develop and commercialize the technology and supported them with drastic political and financial measures. Considering the growing recognition to the field, it is necessary to analysis up-to-now achievement of the government's related projects, in the standards of type of renewable energy, management of sectional goals, and its commercialization. Korean government is chiefly following suit the USA and British policies of developing and distributing renewable energy. However, unlike Japan which is in the lead role in solar rays industry, it still lacks in state-directed support, participation of enterprises and social recognition. The research regarding renewable energy has mainly examinedthe state of supply of each technology and suitability of specific region for applying the technology. The evaluation shows that the research has been focused on supply and demand of renewable as well as general energy and solution for the enhancement of supply capacity in certain area. However, in-depth study for commercialization and the increase of capacity in industry followed by development of the technology is still inadequate. 'Cost-benefit model for each energy source' is used in analysis of technology development of renewable energy and quantitative and macro economical effects of its commercialization in order to foresee following expand in related industries and increase in added value. First, Investment on the renewable energy technology development is in direct proportion both to the product and growth, but product shows slightly higher index under the same amount of R&D investment than growth. It indicates that advance in technology greatly influences the final product, the energy growth. Moreover, while R&D investment on renewable energy product as well as the government funds included in the investment have proportionate influence on the renewable energy growth, private investment in the total amount invested has reciprocal influence. This statistic shows that research and development is mainly driven by government funds rather than private investment. Finally, while R&D investment on renewable energy growth affects proportionately, government funds and private investment shows no direct relations, which indicates that the effects of research and development on renewable energy do not affect government funds or private investment. All of the results signify that although it is important to have government policy in technology development and commercialization, private investment and active participation of enterprises are the key to the success in the industry.

• Journal of Life Science
• /
• v.17 no.3 s.83
• /
• pp.435-443
• /
• 2007

Antimicrobial susceptibility test of the 116 strains of Mycoplasma pneumoniae isolates were performed by a broth micro-dilution method against to moxifloxacin, levofloxacin, sparfloxacin, ofloxacin, ciprofloxacin, clarithromycin minocycline, erythromycin, josamycin, and tetracycline. The initial-minimum inhibitory concentration (I-MIC) was evaluated as the lowest concentration of antimicrobial agents that prevented a color change in the medium at that time when the drug-free growth control, about 7 days after incubation, and the final-minimum inhibitory concentration (F-MIC) was defined a color change about 14 days after incubation. The evaluation to the drug-resistant M. pneumoniae isolates were determined the $MIC{\pm}1.0$ ${\mu}g/ml$ of each antimicrobial agent. According to the I-MIC, single drug-resistant M. pneumoniae strains to ciprofloxacin, ofloxacin, clarithromycin and erythromycin were 79.3, 53.5, 10.3, and 7.8%, respectively. Two kinds of drug-resistant M. pneumoniae strains to ofloxacin and ciprofloxacin, or ciprofloxacin and clarithromycin were 42.2 and 9.5%. Three kinds of drug-resistant M. pneumoniae strains to erythromycin, ofloxacin, and ciprofloxacin, or ofloxacin, ciprofloxacin and clarithromycin were 6.9 and 6.0% . According to the F-MIC, single drug-resistant M. pneumoniae strains to tetracycline, ciprofloxacin, ofloxacin, minocycline,erythromycin, josamycin, clarithromycin and sparfloxacin were 91.4, 91.4, 91.4, 89.7, 68.1, 52.6, 28.5, and 11.2%, respectively. The incidence of two kinds of drug-resistant M. pneumoniae strains were from 20.7% to 91.4%, three kinds of drug-resistant M. pneumoniae strains were from 28.5% to 89.7%, four kinds of drug-resistant M. pneumoniae strains were 2.6%, five kinds of drug-resistant M. pneumoniae were from 2.6% to 21.6%, six kinds of drug-resistant M. pneumoniae strains were from 0.9% to 24.1%, seven kinds of drug-resistant M. pneumoniae strains were from 0.9% to 2.6%, and eight kinds of drug-resistant M. pneumoniae strains were 1.7%. These results suggest that sparfloxacin, moxifloxacin and levofloxacin might be promising antimicrobial agents for the treatment of M. pneumoniae infection in Korea. However, most strains of M. pneumoniae isolates were single or multi-resistance pattern to the other tested antimicrobial agents. Therefore, tetracycline, minocycline, erythromycin, clarithromycin, and second-generation quinolones are more carefully used to patients with M. pneumoniae infection in Korea.

• Journal of Food Hygiene and Safety
• /
• v.30 no.3
• /
• pp.217-226
• /
• 2015

This study was conducted to establish a standardized process for developing food safety health indicators. With this aim, we proposed a standardized process, accessed the validity of the suggested process by performing simulations, and provided a method to utilize the indicators. Developing process for domestic environmental health indicators was benchmarked to propose a standardized process for developing food safety health indicators, and DPSEEA framework was applied to the development of indicators. The suggested standardized process consists of an exploitation stage and a management stage. In the exploitation stage, a total of 6 procedures (initial indicators suggestion, candidate indicators selection, data availability assessment, feasibility assessment, pilot study, and final indicator selection) are conducted, and the indicators are routinely calculated and officially announced in the management stage. The exploitation stage is operated by an interaction between a task force team who manages the overall process, and an advisory committee (minimum of 4 in academia, 2 in research, 4 in specialists of Ministry of Food and Drug Safety) who reviews and performs evaluations on the indicators. The standardized process was simulated with 45 initial indicators, and total of 4 indicators (17 detailed indicators) were selected: 'Proportion of domestic fruit/vegetable receiving 'acceptable' in the evaluation of pesticide/herbicide residues', 'Food-borne disease outbreaks', 'Food-borne legal infectious disease incidence', 'Salmonellosis incidence'. Synthetic food safety health index was derived by calculating percent difference with the data from 2010 to 2012. Results showed that when comparing the year 2010 to 2011, and 2011 to 2012, the overall food safety status improved by 10.37% and 9.87%, respectively. In addition, the contribution of indicators to the overall food safety status can be determined by looking into the individual indicators, and the synthetic index may be illustrated to enhance the ease of interpretation to the public and policy makers. In overall, food health safety indicators can be useful in many ways and therefore, attention should be drawn to conduct further studies and establish related legislations.

• Journal of Food Hygiene and Safety
• /
• v.29 no.4
• /
• pp.305-311
• /
• 2014

Minimum infective dose (MID) data has been recognized as an important and absolutely needed in quantitative microbiological assessment (QMRA). In this study, we performed a comprehensive literature review and meta-analysis to better quantify this association. The meta-analysis applied a final selection of 82 published papers for total 12 species foodborne disease pathogens (bacteria 9, virus 2, and parasite 1 species) which were identified and classified based on the dose-response models related to QMRA studies from PubMed, ScienceDirect database and internet websites during 1980-2012. The main search keywords used the combination "food", "foodborne disease pathogen", "minimum infective dose", and "quantitative microbiological risk assessment". The appropriate minimum infective dose for B. cereus, C. jejuni, Cl. perfringens, Pathogenic E. coli (EHEC, ETEC, EPEC, EIEC), L. monocytogenes, Salmonella spp., Shigella spp., S. aureus, V. parahaemolyticus, Hepatitis A virus, Noro virus, and C. pavum were $10^5cells/g$ (fi = 0.32), 500 cells/g (fi = 0.57), $10^7cells/g$ (fi = 0.56), 10 cells/g (fi = 0.47) / $10^8cells/g$ (fi = 0.71) / $10^6cells/g$ (fi = 0.70) / $10^6cells/g$ (fi = 0.60), $10^2{\sim}10^3cells/g$ (fi = 0.23), 10 cells/g (fi = 0.30), 100 cells/g (fi = 0.32), $10^5cells/g$ (fi = 0.45), $10^6cells/g$ (fi = 0.64), $10{\sim}10^2particles/g$ (fi = 0.33), 10 particles/g (fi = 0.71), and $10{\sim}10^2oocyst/g$ (fi = 0.33), respectively. Therefore, these results provide the preliminary data necessary for the development of foodborne pathogens QMRA.

• Journal of Food Hygiene and Safety
• /
• v.29 no.4
• /
• pp.299-304
• /
• 2014

The dose-response models are important for the quantitative microbiological risk assessment (QMRA) because they would enable prediction of infection risk to humans from foodborne pathogens. In this study, we performed a comprehensive literature review and meta-analysis to better quantify this association. The meta-analysis applied a final selection of 193 published papers for total 43 species foodborne disease pathogens (bacteria 26, virus 9, and parasite 8 species) which were identified and classified based on the dose-response models related to QMRA studies from PubMed, ScienceDirect database and internet websites during 1980-2012. The main search keywords used the combination "food", "foodborne disease pathogen", "dose-response model", and "quantitative microbiological risk assessment". The appropriate dose-response models for Campylobacter jejuni, pathogenic E. coli O157:H7 (EHEC / EPEC / ETEC), Listeria monocytogenes, Salmonella spp., Shigella spp., Staphylococcus aureus, Vibrio parahaemolyticus, Vibrio cholera, Rota virus, and Cryptosporidium pavum were beta-poisson (${\alpha}=0.15$, ${\beta}=7.59$, fi = 0.72), beta-poisson (${\alpha}=0.49$, ${\beta}=1.81{\times}10^5$, fi = 0.67) / beta-poisson (${\alpha}=0.22$, ${\beta}=8.70{\times}10^3$, fi = 0.40) / beta-poisson (${\alpha}=0.18$, ${\beta}=8.60{\times}10^7$, fi = 0.60), exponential (r=$1.18{\times}10^{-10}$, fi = 0.14), beta-poisson (${\alpha}=0.11$, ${\beta}=6,097$, fi = 0.09), beta-poisson (${\alpha}=0.21$, ${\beta}=1,120$, fi = 0.15), exponential ($r=7.64{\times}10^{-8}$, fi = 1.00), betapoisson (${\alpha}=0.17$, ${\beta}=1.18{\times}10^5$, fi = 1.00), beta-poisson (${\alpha}=0.25$, ${\beta}=16.2$, fi = 0.57), exponential ($r=1.73{\times}10{-2}$, fi = 1.00), and exponential ($r=1.73{\times}10^{-2}$, fi = 0.17), respectively. Therefore, these results provide the preliminary data necessary for the development of foodborne pathogens QMRA.

• Journal of Yeungnam Medical Science
• /
• v.22 no.2
• /
• pp.211-220
• /
• 2005

Background: The purpose of this study was to determine the effectiveness of a percutaneously placed self-expanding metallic stent for the relief of biliary obstruction in patients with hilar cholangiocarcinoma. Materials and Methods: From November 2001 to December 2004, 48 patients with hilar cholangiocarcinoma were prospectively studied. After percutaneous placement of bilateral selfexpanding, uncovered metallic stents, follow-up evaluation was carried out until July 2005. Results: There were 4 cases of Bismuth type II, 21 cases of Bismuth type IIIa, 8 cases of Bismuth type IIIb and 15 cases of Bismuth type IV. Stent placement was technically successful in all patients. All patients had satisfactory biliary drainage, resulting in one week drainage rate of 72.8% and final drainage rate of 91.1%. There were 12 cases (21.3%) of abdominal pain requiring analgesics and 1 case (7.1%) of cholangitis; both were successfully managed with conservative treatments. Late complications occurred in four patient (8.3%), including two patients with cholangitis, one patient with liver abscess, and one patient with biloma; all were appropriately managed by percutaneous drainage. The average length and median durations of stent patency and median survival time were 303 days (range, 60~815) and 338 days (range, 60~1175), respectively. Conclusion: Placement of a percutaneous metallic stent is an effective and safe method for palliation of patients with hilar cholangiocarcinoma.

• Korean Journal of Legislative Studies
• /
• v.22 no.2
• /
• pp.113-156
• /
• 2016

Media scholars take a lion stake in power circle. Not only do they take a part in media policies but seize prestigious positions like board members in Korea Communication Commission(KCC). Unfortunately, though, little has been known about who they are, what qualifications they have, and whether they meet public interests. This paper attempts to unveil the mechanism of those politicized intellectuals who are specialized on the media. Two categories divided into 'representative' and 'expertise' are employed for this purpose. On the one hand, the representative means the degree of committment into such public services as participation in conferences or non-profit organizations. On the other hand, the number of research articles, books and projects belong to the expertise. Evaluation levels consist of 'excellence, good and average' were allocated to those scholars who are(were) in 'Power Hole,' where decision makings come into being. Some interesting observations were made though this study. First of all, such criteria as representative and expertise vaguely suggested by the laws were hardly fit into those intellectuals, Rarely did they commit into public service let alone showing vigilance in academic activities. Secondly, both ideological loyalty and political activities in line with the government had much to do with taking such positions. Thirdly, not surprisingly, it showed that to graduate from Seoul National University and have Ph.D. degree from U.S.A. was one of the most essential factors. In final, most of them were very good at taking advantage of the press in way of boosting their publicity. To attend at policy making processes either in form of board members or advisers is inevitable for media experts. However, as shown in this study, such qualification of public service and academic eagerness shouldn't be underestimated. Academic integrity not selling intelligence solely for private interests needs to be protected as well. The authors hope this study to provide a valuable opportunity to establish a kind of ethical standards in participating into politics.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.4
• /
• pp.487-496
• /
• 2021

Full mouth rehabilitation is re-organizing the occlusion of the remaining teeth and missing teeth considering the functions, esthetics, and neuromuscular harmony. With the loss of multiple teeth, the patient's occlusal plane gradually collapses and the vertical dimension can be reduced. Since reduced vertical dimension can be a potential etiology of the temporomandibular joint and masticatory muscles, prosthetic restoration with increased vertical dimension is required. This case report is about a 68 years old patient with vertical dimension loss due to worn dentition and multiple loss of teeth. In this case, the loss of vertical dimension is assessed carefully using the digital dentistry technology. Using CAD software in digital analysis step, the occlusal plane was established and evaluated using several criteria. Orienting the position of the bone and teeth using CBCT image, patient's condition was visualized in 3 dimension and treatment planning was possible virtually. The information that matches the patient's condylar position with the articulator, which is the virtual face bow, is reproduced on the actual articulator, and evaluated again. After the evaluation, provisional prosthesis was fabricated and it was confirmed that the patient adapts without any abnormality. This was implemented as a final prosthesis. As a result, the patient obtained satisfying results, utilizing the benefits of digital dentistry technology and traditional methods.