• Journal of The Korean Society of Grassland and Forage Science
• /
• v.13 no.3
• /
• pp.203-212
• /
• 1993

This experiments were carried out to estimate the optimum final cutting date in autumn and the selection of highly adaptable varieties in mountainous pastures of Taekwalyong area. The evaluations were based on the data of varietal differences of dry weight of plant(DW) and yield components of the 1st cutting as affected by various final cutting dates of last autumn. Nine varieties of tall fescue Barvetia, Fuego. Demeter, Safe. Barcel, Forager, Johnstone, Enforcer and Stef. were used and 4 final cutting date of autumn were $C_1$, cut on 30 Sept. $C_2$, on 14 Oct. $C_3$, on 28 Oct. and $C_4$. on 11 Nov.. respectively. The results obtained were as follows: I . Between the dry weight of plant(DM) and yield components of 1st cutting were different by various final cutting dates of autumn. The dry weight of plant(DW) was significantly positive correlated with heading characteristics of the 1st cutting in earlier cuttings($C_1- C_3$) of autumn, but there was not significant correlated with heading characteristics of the 1st cutting in the latest cutting($C_4$) of autumn. 2. The variety of Forager with heavier weight of heading tiller(HTW) and dry weight of tiller(WT) showed the highest dry weight of plant(DW) of the 1st cutting in earlier cuttings($C_1-C_3$) of autumn, whereas the variety of Barcel with high number of tillers per plant(NT) showed a high dry weight of plant(DW) of the 1st cutting in the latest cutting($C_4$) of autumn. 3. Optimum final cutting date and critical period of mountainous pastures in Taekwalyong area were estimated in late September($C_1$) and middle October($C_2$), sespectirety. 4. The dry weight of plant(DW) of the 1st cutting was significantly negative correlated with final cutting dates in growth period of autumn.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.5
• /
• pp.662-670
• /
• 2005

Statement of problem: Little is known about the effect of abutment preparation procedure on do-torque values in different implant platform and the relationship of final do-torque values with different implant platform size. Purpose: This study evaluated the effect of abutment preparation procedure on do-torque values in different implant platform and the relationship of final do-torque values with different implant platform size. Material and method: Six ITI implants (2 narrow-neck implants, 2 regular-neck implants, 2 wide-neck implants) and six Branemark implants (2 narrow platforms, 2 regular platforms, 2 wide platforms) were embedded in each acrylic resin block with epoxy resin. Eighteen $synOcta^(R)$ abutments (6 narrow-neck implant-abutments, 6 regular-neck implant-abutments, 6 wide-neck implant-abutments) and eighteen esthetic abutments (6 narrow platform-abutments, 6 regular platform-abutments, 6 wide platform-abutments) were tightened to each implant with digital torque gauge. Initial do-torque values were measured using digital torque gauge. After preparation of abutments, Final do-torque values were measured with digital torque gauge. Results and conclusion: 1. Screws loosening or abutments motion were not detected in all experimental group, but some scratches of implant-abutment joints were detected in all group 2. Reduction ratios of final do-torque values were greater than initial do-torque values in all measured group, except in narrow-neck implant-abutment group (p<0.05). 3. Reduction ratios of final do-torque values in wide-neck implant-abutment group were greater than regular-neck implant-abutment group (p<0.01). 4. The greatest standard deviation value was detected in wide platform group in both implant systems.

• Phonetics and Speech Sciences
• /
• v.7 no.2
• /
• pp.19-28
• /
• 2015

This study investigated final consonant error characteristics at word-medial position in children with functional articulation disorder. Data was collected from 11 children with functional articulation and 11 normal children, ages 4 to 5. The speech samples were collected from a naming test. Seventy-five words with every possible bi-consonants matrix at the word-medial position were used. The results of this study were as follows : First, percentage of correct word-medial final consonants of functional articulation disorder was lower than normal children. Second, there were significant differences between two groups in omission, substitution and assimilation error. Children with functional articulation disorder showed a high frequency of omission and regressive assimilation error, especially alveolarization in regressive assimilation error most. However, normal children showed a high frequency of regressive assimilation error, especially bilabialization in regressive assimilation error most. Finally, the results of error analysis according to articulation manner, articulation place and phonation type of consonants of initial consonant at word-medial, both functional articulation disorder and normal children showed a high error rate in stop sound-stop sound condition. The error rate of final consonant at word-medial position was high when initial consonant at word-medial position was alveolar sound and alveopalatal sound. Futhermore, when initial sounds were fortis and aspirated sounds, more errors occurred than linis sound was initial sound. The results of this study provided practical error characteristics of final consonant at word-medial position in children with speech sound disorder.

• Journal of the Korean Geosynthetics Society
• /
• v.2 no.3
• /
• pp.11-18
• /
• 2003

The one of the most important concerns in the design of the final cover system is to restrict percolation of water into the waste body. To minimize entering the water, the final cover system has the barrier layer that consists of a single compacted clay liner(CCL) or a composite liner with high density polyethylene(HDPE) overlying CCL. The HDPE as well as CCL can be damaged by landfill settlements. Therefore, this study was conducted to assess the effects of HDPE induced by settlements in the final cover system after closure. The results of the three test that is field test, lysimeter test in laboratory, and prediction of settlement represent that the HDPE in the final cover system is not pretty much affected by settlements and stable on settlements.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.2
• /
• pp.107-111
• /
• 2011

The release of a site and building from regulatory control is the final stage of the decommissioning process. The MARSSIM (Multi-Agency Radiation Survey and Site Investigation Manual) provides overall framework for conducting data collection for a final status survey to demonstrate compliance with site closure requirements. The KAERI carried out establishing a final status survey by using the guidance provided in the MARSSIM for of a site and building of the Korea Research Reactor. The release criteria for a site and building were set up based on these results of the site specific release levels which were calculated by using RESRAD and RESRAD-Build codes. The survey design for a site and building was classified by using the survey dataset and potential contamination. The number of samples in each survey unit was calculated by through a statistical test using the collected data from a scoping and characterization survey. The results of the final status survey were satisfied the release criteria based on an evaluation of the measured data.

• Structural Engineering and Mechanics
• /
• v.73 no.4
• /
• pp.427-436
• /
• 2020

The use of final IGS precise orbit and clock products for high-rate GNSS-PPP proved its effectiveness in capturing dynamic displacement of engineering structures caused by earthquakes. However, the main drawback of using the final products is that they are available after approximately two weeks of data collection, which is not suitable for timely measures after an event. In this study, the use of ultra-rapid products (observed part), which are available after a few hours of data collection, and rapid products, which are available in less than 24 hrs, are investigated and their results are compared to the more precise final products. The tests are designed such that harmonic oscillations with different frequencies and amplitudes and ground motion of a simulated real earthquake are generated using a single axis shake table and the PPP was used to capture these movements by monitoring time-change of the table positions. To evaluate the accuracy of PPP using ultra-rapid, rapid and final products, their results were compared with relative GNSS positioning and LVDT (Linear Variable Differential Transformer) data, treated as reference. The results show that the high-rate GNSS-PPP solutions based on the three products can capture frequencies of harmonic oscillations and dynamic displacement with good accuracy. There were slight differences between ultra-rapid, rapid and final products, where some of the tested events indicated that the latter two produced are more accurate and provide better results compared to the ultra-rapid product for monitoring short-term dynamic displacements.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.12
• /
• pp.1193-1203
• /
• 1995

In this work, we focused on the setup of the tools for the analysis of the final rotational state distribution of photofragments in vibrational predissociations of triatomic van der Waals molecules A-B2. We found that reflection principle used for the direct photodissociation processes can also be applied to find out the final rotational state distributions for indirect photodissociation processes. The quantity which represents the strength of rovibrational coupling between the quasi-bound state and the final state is reflected into the mirror of the classical angular momentum function, instead of the initial state before light absorption used in the reflection principle of direct processes. The sign change in the first derivative of the interaction potential with respect to the bond distance of B2 is found to be the source of the binodal structures in the final rotational distributions of photofragments in the model system studied in this work. In MQDT analysis, short range eigenchannel basis functions were found to be localized in angle, in the previous work [Lee, C.W. Bull. Korean Chem. Soc. 1995, 16, 957.] and may be called angle functions. Angle functions enjoy simple geometrical structures which have simple functional relations with the final state distributions of photofragments. Two processes take place along the angle functions which resemble the quasi-bound state and dominate over other processes. Two such angle functions are found to be not only localized angularly but also localized either one of ends of B2 in motions along the bond of B2. These dominating photodissociation processes, however, cancel each other. This cancellation causes photodissociation to depend sensitively on the interaction potential at other angles than the dominant one. Part of potential surface where much larger torque exists can now play an important role in photodissociation. MQDT also enables us to see which processes play important roles after cancellation. This is done by examining the amounts of time delayed by asymptotic eigenchannels.

• Smart Media Journal
• /
• v.9 no.4
• /
• pp.126-133
• /
• 2020

The treatment policy and prognosis are determined based on the final stage of lung cancer patients. The final stage of lung cancer patients is determined based on the T, N, and M stage classification table provided by the American Cancer Society (AJCC). However, the final stage of AJCC has limitations in its use for various fields such as patient treatment, prognosis and survival days prediction. In this paper, clustering algorithm which is one of non-supervised learning algorithms was assessed in order to check whether using only T, N, M stages with a data science method is effective for classifying the group of patients in the aspect of survival days. The final stage groups and T, N, M stage clustering groups of lung cancer patients were compared by using the cox proportional hazard model. It is confirmed that the accuracy of prediction of survival days with only T, N, M stages becomes higher than the accuracy with the final stages of patients. Especially, the accuracy of prediction of survival days with clustering of T, N, M stages improves when more or less clusters are analyzed than the seven clusters which is same to the number of final stage of AJCC.

• Journal of Korea Society of Waste Management
• /
• v.35 no.8
• /
• pp.785-798
• /
• 2018

Since the Framework Act on Resource Circulation was enacted in 2018, the government should establish a National Resource Circulation Master Plan every 10 years, which defines mid- to long-term policy goals and directions on the efficient use of resources, prevention of waste generation and recycling of waste. In addition, we must set mid- to long-term and stepwise targets for the final disposal rate, recycling rate (based on sorted recyclable materials and recycled products), and energy recovery rate of wastes, and relevant measures should be taken to achieve these targets. However, the current industrial waste (IW) statistics have limitations in setting these targets because the final disposal rate and recycling rate are calculated as the ratio of the recycling facility input to the IW generation. In this study, the material flow from the collection stage to the final disposal of industrial waste was analyzed based on the generation of 2016, and the actual recycling amount, actual incineration amount, final disposal amount and their rates were calculated. The effect on the recycling, incineration and final disposal rates was examined by changing the treatment method of nonhazardous wastes from the factory and construction and demolition wastes, which were put in landfills in 2016. In addition, the variation of the waste treatment charge was investigated according to the change of treatment methods. The results of this study are expected to be effectively used to establish the National Resource Circulation Master Plan and industrial waste management policy in the future in South Korea.

• Korean Journal of Metals and Materials
• /
• v.47 no.8
• /
• pp.474-481
• /
• 2009

The effects of final heat treatment on the mechanical and corrosion properties of a Zr alloy strip incorporating Nb were investigated. The chemical composition of the strip was Zr-1.49Nb-0.38Sn-0.20Fe-0.11Cr, and strip specimens were subjected to final heat treatment in a temperature range of $580{\sim}700^{\circ}C$. Tensile tests at room temperature and $316^{\circ}C$, along with corrosion tests in a simulated PWR loop and a 70 ppm LiOH solution environment at $360^{\circ}C$, were performed on the specimens. The mechanical properties of the strip were saturated when the specimens received final heat treatment at an elevated temperature of more than $640^{\circ}C$. However, the corrosion resistance of the strip in the simulated PWR loop and in the 70 ppm LiOH solution environment was improved with a decrease of the final annealing temperature. It is recommended that the alloy strip be finally heat-treated at a temperature of less than $620^{\circ}C$ for longer than 10 minutes in order to obtain fully recrystallized microstructures, and thereby attain enlarged tensile elongation, and to prevent the precipitation of ${\beta}-Zr$, which is known to deteriorate the corrosion resistance.