• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.4
• /
• pp.105-116
• /
• 2000

The purpose of this paper is to minimize differences between landscape detailed design (hereafter 'design') and final landscape construction products in working sites (hereafter 'products'). Ten landscape sites constructed in recent two years were selected to examine the differences. Differences in quantities and quality between design and products were surveyed and the results were analyzed with the 'differential analysis method'. The method employed in this paper can be used as an optimization model to minimize the differences between design and products. This paper suggests that every landscape field should mark less than 13.672% calculated from the 10% of total amount for excellent construction products. This should be approved by the president, according to the Clause 20 of General Conditions of the Contract, divided by the ratio of quantities affecting mainly he average Difference in Value between Design and Construction(DVDC). This value can be the critical point from the differential analysis method for the optimal maximum DVDC between landscape design and final landscape construction products in fields.

• Phonetics and Speech Sciences
• /
• v.8 no.1
• /
• pp.19-24
• /
• 2016

The Korean high back vowels /o/ and /u/ have been reported to be in a state of near-merger especially among young female speakers. Along with cross-generational changes, the vowel position within a word has been reported to render different phonetic realization. The current study examines native English speakers' ability to attend to the phonetic cues that distinguish the two merging vowels and the positional effects (word-initial vs. word-final) on the identification accuracy. 28 two-syllable words containing /o/ or /u/ in either initial or final position were produced by native female Korean speakers. The CV part of each target word were excised and presented to six native English speakers. The results showed that although the identification accuracy was the lowest for /o/ in word- final position (41%), it increased up to 80% in word-initial position. The acoustic analyses of the target vowels showed that /o/ and /u/ were differentiated on the height dimension only in word-initial position, suggesting that English speakers may have perceived the distinctive F1 difference retained in the prominent position.

• The Korean Journal of Applied Statistics
• /
• v.25 no.1
• /
• pp.139-152
• /
• 2012

The result of the analysis of a population pharmacokinetic model can directly influence the decision of the dose level applied to the targeted patients. Therefore the validation procedure of the final model is very important in this area. This paper reviews the validation methods of population pharmacokinetic models from a statistical viewpoint. In addition, the whole procedure of the analysis of population pharmacokinetics, from the base model to the final model (that includes various validation procedures for the final model) is tested with real clinical data.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.4
• /
• pp.10-17
• /
• 2000

The change of fiber length, freeness, initial forming drainage velocity, specific filtration resistance, final drainage time and wet web dryness were measured to investigate the effect of the refining load on the drainage characteristics of pulp. The arithmetic average fiber length after refining with higher refining load was shorter than that obtained with lower refining load. Higher refining load decreased initial forming drainage velocity, final drainage time and wet web dryness. The refining load also affected the relationship between freeness and specific filtration resistance, initial forming drainage velocity, final drainage time. It was found that the specific filtration resistance is better than freeness to predict the drainage characteristics of pulp and the wet dryness.

• Journal of Korea Foundry Society
• /
• v.6 no.1
• /
• pp.5-11
• /
• 1986

The Wear Characteristics of Al-Si alloys were investigated with various Si contents by using the not-dispersed alloys and uncoated-graphite dispersed alloys. Uncoated-graphite dispersions were accomplished by Vortex method carrying 1 hr. heating at $400^{\circ}C$ on uncoated-graphite. Wear loss were increased by increasing Si contents at the elevated final load. Hyper-eutectic alloys showed higher wear resistance values at the small final load of 2.1Kg and 3.2Kg, but at the more increased final load, hypo-eutectic alloys showed higher wear resistance values than hyper-eutectic alloys. The property of wear resistance of uncoated-graphite dispersed Al-Si alloys showed more good values than not-dispersed alloys. This peroperty of increased war resistance were resulted from lubricating action of dispersed graphite.

• Fibers and Polymers
• /
• v.7 no.3
• /
• pp.262-269
• /
• 2006

In this paper, the effects of low temperature plasma (LTP) treatment on the dyeing properties of the wool fiber were studied. The wool fibers were treated with oxygen plasma and three types of dye that commonly used for wool dyeing, namely: (i) acid dye, (ii) chrome dye and (iii) reactive dye, were used in the dyeing process. For acid dyeing, the dyeing rate of the LTP-treated wool fiber was greatly increased but the final dyeing exhaustion equilibrium did not show any significant change. For chrome dyeing, the dyeing rate of the LTP-treated wool fiber was also increased but the final dyeing exhaustion equilibrium was only increased to a small extent. In addition, the rate of afterchroming process was similar to the chrome dyeing process. For the reactive dyeing, the dyeing rate of the LTP-treated wool fiber was greatly increased and also the final dyeing exhaustion equilibrium was increased significantly. As a result, it could conclude that the LTP treatment could improve the dyeing behavior of wool fiber in different dyeing systems.

• Korean Journal of English Language and Linguistics
• /
• v.2 no.2
• /
• pp.287-304
• /
• 2002

Truncated forms (truncata) in English hypocoristic words have been argued to be faithful to their bases. This means that “ ... the base of truncation is an output form"”(Benua 1995:6,12). For example, in some non-rhotic dialects where syllable-final [r]s are deleted, the [r]s of truncated names such as Gar [gær] (truncated form of Garry [gæri]) are not deleted although they are syllable-final. This is an example of base-truncatum identity. That is, the syllable-final [r] is retained to make the truncatum more faithful to its base. However, there are many English hypocoristic names which are not faithful to their base forms. For example, Letty [equation omitted] (hypocoristic form of Latitia [equation omitted]) is not faithful to its base; the first vowel and the second consonant of the truncatum are not identical to the corresponding segments of the base. It will be argued, therefore, that some truncated forms are more faithful to the inputs than the bases. It will also be argued that McCarthy and Prince's (1995) Full Model is needed to deal successfully with all the phenomena related to truncation.

• Journal of The Korean Astronomical Society
• /
• v.39 no.4
• /
• pp.147-150
• /
• 2006

In this paper, initial value problem for dynamical astronomy will be established using parabolic cylindrical coordinates. Computation algorithm is developed for the initial value problem of gravity perturbed trajectories. Applications of the algorithm for the problem of final state predication are illustrated by numerical examples of seven test orbits of different eccentricities. The numerical results are extremely accurate and efficient in predicating final state for gravity perturbed trajectories which is of extreme importance for scientific researches as well as for military purposes. Moreover, an additional efficiency of the algorithm is that, for each of the test orbits, the step size used for solving the differential equations of motion is larger than 70% of the step size used for obtaining its reference final state solution.

• Journal of the Semiconductor & Display Technology
• /
• v.3 no.4
• /
• pp.45-49
• /
• 2004

We examined large particles and filter size effects of Central Chemical Supplying (CCS) system for STI-CMP on Light Point Defects (LPDs) after polishing. As manufacturing process recently gets thinner below 0.1 um line width, it is very important to keep down post-CMP micro-scratch and LPDs in case of STI-CMP. Therefore, we must control the size distribution of large particles in a slurry. With optimization of final filter size, CCS system is one of the solutions for this issue. The oxide and nitride CMP tests were accomplished using nano-ceria slurries made by ourselves. The number of large particles in a slurry and the number of LPDs on the wafer surface after CMP were reduced with decrease of the final filter size. Oxide removal rates slightly changed according to the final filter size, showing the good performance of self-made nano ceria slurries.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.12
• /
• pp.2970-2981
• /
• 1993

In hot closed-die forging the load increases rapidly near the final stage. Preforming operation is important to both the sound final forging and die-service life. In this study, the material flows during preforming and final forging are investigated. The physical modeling with Plasticine as a model material showed clear flow patterns. The forging process were numerically simulated by the finite element method with the isothermal and the non-isothermal models. The flow patten of the isothermal simulation showed good agreements with the experiments. Temperature changes and pressure distributions on the die surfaces during one cycle of the forging process were obtained from the non-isothermal simulation. High pressure and temperature were developed at certain areas of the die surfaces. It was concluded that those areas usually coincide with each other and should be distributed by the preforming operations to enhance the die life.