• 한국자동차공학회논문집
• /
• 제19권4호
• /
• pp.24-31
• /
• 2011

Performance of the asymmetric trapezoidal fin with various upper lateral surface slopes is investigated by using the two-dimensional analytic method. For a fin base boundary condition, convection from the inner fluid to the inner wall, conduction from the inner wall to the fin base and conduction through the fin base are considered. Heat loss and fin efficiency are represented as a function of the fin base thickness, base height, inner fluid convection characteristic number, fin tip length and fin shape factor. One of the results shows that heat loss increases while fin efficiency decreases as the fin shape factor increases.

• 한국자동차공학회논문집
• /
• 제9권3호
• /
• pp.84-91
• /
• 2001

Comparison between performance of a plate fin and that of a modified plate fin is investigated as a function of the position, the non-dimensional width and height of wings as well as the non-dimensional fin length using a two-dimensional separation of variables method. The ratio of the incremental rate of heat loss to that of the area of a modified plate fin is also presented as a function of the height of wings. The modified plate fin is made by attaching the wings to upper and lower sides of a plate fin. One of the results shows that performance of a modified plate fin is more improved as the wings approach left (higher) thermal reservoir.

• 전자공학회논문지
• /
• 제50권4호
• /
• pp.35-42
• /
• 2013

본 논문에서는 3차원 소자 시뮬레이터인 Sentaurus를 사용하여, spacer 및 selective epitaxial growth (SEG) 구조 등 공정적 요소를 고려한 22 nm 급 FinFET 구조에서 레이아웃에 따른 DC 및 AC 특성을 추출하여 아날로그 성능을 평가하고 개선방법을 제안한다. Fin이 1개인 FinFET에서 spacer 및 SEG 구조를 고려할 경우 구동전류는 증가하지만 아날로그 성능지표인 unity gain frequency는 total gate capacitance가 dominant하게 영향을 주기 때문에 동작 전압 영역에서 약 19.4 % 저하되는 것을 알 수 있었다. 구동전류가 큰 소자인 multi-fin FinFET에서 공정적 요소를 고려하지 않을 경우, 1-finger 구조를 2-finger로 바꾸면 아날로그 성능이 약 10 % 정도 개선되는 것으로 보이나, 공정적 요소를 고려 할 경우 multi-finger 구조의 게이트 연결방식을 최적화 및 gate 구조를 최적화 해야만 이상적인 아날로그 성능을 얻을 수 있다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.274-280
• /
• 2005

The objective of this study Is to investigate the heat transfer performance of plate discrete fin-and-tube heat exchangers with large fin pitch. In this study, twenty-two heat exchangers were tested with a variation of fin pitch, number of tube row, longitudinal tube pitch and fin alignment. Discrete fin type exchangers improved heat transfer performance more than 10% compared to tile continuous fin type heat exchangers. The air-side heat transfer coefficient decreased with a reduction of the fin pitch and an increase of the number of tube row, The staggered fin alignment improved heat transfer performance more than 6% compared to the inline fin alignment. The effect of longitudinal tube pitch was insignificant on the j-factor and experiments found opposite effects on the j-factor with respect to fin alignment. Heat transfer correlations were developed from the measured data for flat plate discrete fin-and-tube heat exchangers with large fin pitch. The correlations yielded good predictions of the measured data with mean deviations of 1,4% and 0.3% for tire inline and staggered tube alignment, respectively.

• 전자공학회논문지
• /
• 제51권7호
• /
• pp.71-81
• /
• 2014

본 논문에서는 삼차원 소자 시뮬레이터(Sentaurus)를 이용하여 tri-gate FinFET의 fin과 소스/드레인 구조의 변화에 따른 소자의 성능을 분석하였다. Fin의 구조가 사각형 구조에서 삼각형 구조로 변함에 따라, fin 단면의 전위 분포의 차이로 문턱 전압이 늘어나고, off-current가 72.23% 감소하고 gate 커패시턴스는 16.01% 감소하였다. 소스/드레인 epitaxy(epi) 구조 변화에 따른 성능을 분석하기 위해, epi를 fin 위에 성장시킨 경우(grown-on-fin)와 fin을 etch 시키고 성장시킨 경우(etched-fin)의 소자 성능을 비교했다. Fin과 소스/드레인 구조의 변화가 회로에 미치는 영향을 살펴보기 위해 Sentaurus의 mixed-mode 시뮬레이션 기능을 사용하여 3단 ring oscillator를 구현하여 시뮬레이션 하였고, energy-delay product를 계산하여 비교하였다. 삼각형 fin에 etched 소스/드레인 epi 구조의 소자가 가장 작은 ring oscillator delay와 energy-delay product을 보였다.

• 대한기계학회논문집B
• /
• 제25권1호
• /
• pp.1-8
• /
• 2001

Performance of a rectangular fin is investigated by a three dimensional analytical method. Heat loss and the temperature obtained from the three dimensional analysis are compared with those calculated from a two dimensional analysis. Fin effectiveness, fin resistance and fin efficiency for the rectangular fin are presented as a function of non-dimensional fin length and fin width. The results are obtained in the following : (1) heat loss calculated from the two dimensional analysis is the same as that obtained from the three dimensional analysis with adiabatic boundary condition in z-direction, (2) heat loss obtained from the two dimensional analysis approaches the value for the three dimensional analysis as the non-dimensional fin width becomes large, (3) fin effectiveness increases as non-dimensional fin length increases and non-dimensional fin width decreases, and vice versa for fin efficiency.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1166-1171
• /
• 2009

Fin-tube heat exchangers are widely used in refrigeration systems. To improve the performance of fin-tube heat exchangers, the shape of plain fin was developed in slit fin and louver fin. These pins have higher heat transfer performance as well as larger pressure drop. Recent studies of a delta winglet vortex generators(DWVG) show less heat transfer capacity than louver fin. However, the DWVG have very small pressure drop. This paper compares the performance for the plain fin and DWVG fin in terms of flow characteristics and heat transfer based on CFD analyses. The DWVG generate vortex and delayed flow separation and leads to a reduction of a wake region behind a tube. The results show that the DWVG produce improved heat transfer and reduced pressure drop compared to a plain fin. This result is opposite to the Reynolds analogy.

• 설비공학논문집
• /
• 제16권8호
• /
• pp.683-690
• /
• 2004

A modified rectangular fin is analyzed by two-dimensional analytic method and finite difference method. Relative error of heat loss from the modified rectangular fin between analytic method and finite difference method is presented. Comparisons of fin effectiveness and heat loss between a modified rectangular fin and a plane rectangular fin are made as a function of the non-dimensional fin length and wing height for different positions of wings by using analytic method. The ratio of the incremental rate of heat loss to that of the area of a modified rectangular fin is shown as a function of the wing height. One of the results shows that performance of a modified fin is more improved as the wing approaches the fin root.

• 설비공학논문집
• /
• 제11권3호
• /
• pp.292-300
• /
• 1999

Fin conduction not only enhances heat transfer to the ambient air but also increases tube-to-tube conduction. The latter is known to deteriorate the heat exchanger performance. Heat conduction between neighboring tubes thorough the fin is numerically investigated for accurate performance analysis of plate finned-tube heat exchangers. Governing equations for arbitrary plate fin are solved and the temperature distribution is obtained using the principle of superposition. Analysis is made using finite element method by changing the shapes of fin, the arrangements of tubes and the fin parameter mD. It is found that tube-to-tube conduction is significant when mD is small or the distance between neighboring tubes is small.

• 설비공학논문집
• /
• 제2권1호
• /
• pp.27-36
• /
• 1990

An experimental investigation was made to study the performance characteristics of evaporator having different fin configurations and tube inner grooves. Three different types of fin such as super slitted fin, slitted fin, plain fin, and two types of tube such as inner grooved tube, and bare tube, are tested varying the air velocity, evaporation temperature and superheat of refrigerant. Results show that in the range of air side Reynolds number $3{\times}10^3\;-\;1.5{\times}10^4$ evaporator with super slitted fin and inner grooved tube shows best performance. It is 80% higher in overall heat transfer coefficient and 2.6 times higher in pressure loss compared to that with plain fin inner grooved tube. Friction factor is found to be almost independent of evaporating temperature and degree of superheat, while Colburn j factor varies with evaporating temperature.