• ETRI Journal
• /
• 제30권2호
• /
• pp.249-254
• /
• 2008

In this paper, we demonstrate an electrically band-limited carrier-suppressed return-to-zero (EB-CSRZ) signal generator operating up to a 10 Gbps data rate comprising a single-stage Mach-Zehnder modulator and a wideband signal mixer. The wideband signal mixer comprises inverter stages, a mixing stage, and a gain amplifier. It is implemented by using a 0.13 ${\mu}m$ CMOS technology. Its transmission response shows a frequency range from DC to 6.4 GHz, and the isolation response between data and clock signals is about 21 dB at 6.4 GHz. Experimental results show optical spectral narrowing due to incorporating an electrical band-limiting filter and some waveform distortion due to bandwidth limitation by the filter. At 10 Gbps transmission, the chromatic dispersion tolerance of the EB-CSRZ signal is better than that of NRZ-modulated signal in single-mode fiber.

• Smart Structures and Systems
• /
• 제22권1호
• /
• pp.95-103
• /
• 2018

Active vibration control via inertial mass actuators has been shown as an effective tool to significantly reduce human-induced vertical vibrations, allowing structures to satisfy vibration serviceability limits. However, a lot of practical obstacles have to be solved before experimental implementations. This has motivated simple control techniques, such as direct velocity feedback control (DVFC), which is implemented in practice by integrating the signal of an accelerometer with a band-pass filter working as a lossy integrator. This work provides practical guidelines for the tuning of DVFC considering the damping performance, inertial mass actuator limitations, such as stroke and force saturation, as well as the stability margins of the closed-loop system. Experimental results on a full scale steel-concrete composite structure (behaves similar to a footbridge) with adjustable span are reported to illustrate the main conclusions of this work.

• 한국음향학회지
• /
• 제21권2호
• /
• pp.102-109
• /
• 2002

본 논문에서는 위드로월 (withdrawal) 가중형 SAW필터를 자동으로 최적화할 수 있는 설계도구의 개발 내용을 제시하였다. SAW 공진기에 위드로월 가중법이 적용될 경우, 향상된 대역폭 및 천이대역 특성을 구현할 수 있으며, 이러한 위드로월 가중효과를 이용하여 사다리형 위드로월 SAW필터의 최적화도구를 완성하였다. 본 설계방법의 유효성을 검증하기 위하여 RF 대역 CDMA용 TX 및 RX SAW 필터를 본 설계도구를 이용하여 최적화하였으며 실제 실험 결과, 이론과 매우 잘 일치함을 알 수 있었다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권3호
• /
• pp.182-186
• /
• 2004

In this paper, 2.4GHz WLAN BPF(Band Pass Filter) which has two DGS(Defected Ground Structure) unit cells was simulated and manufactured. To do this, a unit DGS resonator with resonant frequency is designed. Then the BPF for WLAN with the center frequency of 2.4GHz md the bandwidth of 200MHz is designed using two DGS resonator, finally this circuit is fabricated. We also proposed the equivalent circuit of the BPF employing two DGS resonator. The BPF with DGS was obtained experimental results with network analyzer Agilent 8510C. The measured result shows good agreement with simulated data. Experimental results show the center frequency of 2.45GHz, the insertion loss of 1.08dB, and the 3-dB bandwidth of 470MHz(19.5%). Acceding to the measured values, it is found that the fabricated DGS BPF is available for wireless LAN.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.676-679
• /
• 2001

A low-temperature cofired-ceramic (LTCC) multi-layer ceramic (MLC) band-pass filter (BPF) is presented, which has the benefits of low cost and small size. The BPF is designed for a IMT-2000 handset. The computer-aided design technology is also presented. The BPF with an attenuation pole at below the passband has been discussed and realized. The equivalent circuit of the BPF was established by transmission lines and lumped capacitors. The frequency characteristics of the LTCC-MLC BPF is well acceptable for IMT-2000 application.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.367-370
• /
• 1998

A hybrid-integrated SAW(surface acoustic wave) douplexer including transmitter(Tx) filter, receiver(Rx) filter an dantenna terminal has been studied. The prototype duplxer was designed for CDMA system application in the 800 MHz-band. Ladder type SAW filters consisting of one port SAW resonators wer integrated on epoxy substrate to demonstrate the feasiblity of antenna duplexer. In order to perform the duplexing function, a strip line for impedance transformaton with length of .gamma./4 was inserted at rx path. The fabricted duplexer has an insertion loss of 3.0 dB at Tx path and 3.7 dB at Rx path. The attenuation has more than 40dB.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2003년도 하계학술대회
• /
• pp.3-6
• /
• 2003

Effect to altered geometry of a suggested defected ground structure(DGS) unit cell was investigated . And equivalent circuit model was extracted from the DGS unit cell A microstrip band Pass filter with DGS has been designed in this Paper. The BPF with DGS was fabricated and obtained experimental results with network analyzer HP8510C. Experimental results show the center frequency of 2.45GHz, the insertion loss of 0.85dB, and the 3-dB bandwidth of 470MHz (19.5%). The center frequency of BPF is 2.4GHz which is available for wireless LAN.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.134-137
• /
• 2001

A variable bandwidth filter (VBF) is proposed for cleaning signals with known instantaneous bandwidth (IB). Also, the behaviors and the characteristics of the VBF are examined in time-frequency domain (TFD). The proposed VBF clips a noisy signal along the boundaries of IB and rejects noise in the outside of the IB of the signal in TFD. It is possible to construct four kinds of VBF that are low-pass VBF, high-pass VBF, band-pass VBF and band-stop VBF.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.138-141
• /
• 2001

In this paper, a VBF(variable bandwidth filter) is suggested and analyzed in time-frequency domain. There are four kinds of VBF, which are low-pass VBF, high-pass VBF, band-pass VBF and band-stop VBF. The proposed VBF can extract the components of signals within variable instantaneous bandwidth at a specific time instant. Instantaneous bandwidth is estimated in time-frequency domain. The VBF is represented by rational form in extended Fourier frequency domain.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술대회 논문집
• /
• pp.25-25
• /
• 2010

This paper describes the design and fabrication of a Risk Voltage Meter (RVM) which can analyze the step and touch voltages in grounding systems. The meter consists of a sine-wave power source which generates up to 300 [$V_{rms}$] in ranges of 45 [Hz]~1 [kHz], a 8 Ch. data acquisition module, and a personal computer. Also, a noise elimination method by a digital band-pass filter during measurement is proposed.