• 한국전산유체공학회:학술대회논문집
• /
• 1998.11a
• /
• pp.108-113
• /
• 1998

A numerical investigation for the flow, heat and mass transfer characteristics of the grooved evaporating tube with the films flowing down on both the inside and outside tube walls has been carried out. The condensation occurs along the outside wall while the evaporation takes place at the free surface of the inside film. The 3-D transport equations for momentum and energy are solved by using the FVM(Finite Volume Method). The free surface shape is tracked by the moving grid technique satisfying the SCL(Space Conservation Rule). Due to the secondary motion of the fluid, the film thins at the crest, while thickens at the valley. The velocity and temperature fields as well as the amounts of the condensed and evaporated mass have been successfully predicted for various operating conditions and groove shapes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.750-753
• /
• 2002

The chemical vapor condensation process of Parylene-N thin films was investigated and applied to the passivation of the organic light emitting diodes (OLEDs). The effects of process variables on the deposition rate were studied, and it was found that the deposition rate of Parylene increases with increasing precursor sublimation temperature but decreases with increasing substrate temperature. The Parylene film was used as a passivation layer for OLEDs, and as a result, the lifetime of the passivated OLEDs was increased by a factor of about 2.3 compared with that of non-passivated OLEDs.

• Transactions on Electrical and Electronic Materials
• /
• v.2 no.2
• /
• pp.42-45
• /
• 2001

An ozone condensation system is evaluated from the viewpoint of an ozone supplier for Bi-superconductor thin film growth. An ozone condenser by a selective adsorption on the silica gel surface is constructed. Ozone density is evaluated by three methods; ultraviolet absorption, thermal decomposition and Q-mass analyzing methods. Thermal decomposition method is found to be available to the density evaluation from dilute to highly condensed ozone. The highest ozone density condensed by the adsorption method is evaluated to be 97 mol%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.264-267
• /
• 2002

An ozone condensation system is evaluated from the viewpoint of an ozone supplier for oxide thin film growth. Ozone is condensed by the adsorption method and its concentration is analyzed by three methods; ultraviolet absorption, thermal decomposition and Q-mass analyzing methods. Thermal decomposition method is found to be available to the concentration evaluation from dilution to highly condensed ozone. The highest ozone concentration condensed by the adsorption method is evaluated to be 97 mol%

• Macromolecular Research
• /
• v.17 no.9
• /
• pp.697-702
• /
• 2009

Mesoporous ethanesilica thin film was prepared using PEO-PLGA-PEO triblock copolymers as structure-directing agents and (1,2-bis(triethoxysilyl) ethane BTESE; bridged organosilicates) as inorganic precursors via one-step sol-gel condensation of ethanesilica precursors. The mesostructure of ethanesilica films is critically dependent on the processing experimental parameters after the hydrolyzed silica sol mixture was spin-cast. This study examined the effects of the block copolymer template/organosilica precursor ratio in the casting solution and aging period before calcination of the mesostructure. It was further demonstrated that mesoscopic ordering of organosilicate thin films is induced by the rearrangement of block copolymer template/organosilica hybrid during thermal decomposition of the PEO-PLGA-PEO triblock copolymer. The mesoporous structure and morphology were characterized by SAXS, TEM and solid-state NMR measurement.

• The Journal of Information Technology
• /
• v.9 no.1
• /
• pp.1-7
• /
• 2006

In this paper, we describe a study on the relationship between photographic emulsion manufacture and hardening test of films. The hardeners were prepared by condensation of equimolar amounts of trichlorotriazine with benzene- or naphthalene-based amino or oxy acids at 0 to 5$^{\circ}C$ and at pH 7, and used as hardening agents for gelatin. The hardening test of photographic emulsion was studied at pH 5.5. For example I(R=ONa) had strong hardening properties, I substituted with an aminobenzosulfonate moiety (R=$NHC_6H_4-p-SO_3Me$ where Me = K, Na) was a much weaker gelatin hardener, and when substituted with amino- or oxynaphthalene derivative (II, III) did not harden gelatin at all. Compound with 2 dichlorotriazine groups as IV exhibited strong hardening properties. The hardener can be used in photographic emulsion of film and showed very good hardening effect.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.3
• /
• pp.406-409
• /
• 1999

Thin films of silver with high reflectance of 95% and above were fabricated successfully on polyester substrate by using e-beam evaporation processes. The optimum process condition was investigated by varying the current values applied while keeping the substrate temperature at room temperature by circulating the cooling water around it during deposition. Thin films of silver deposited with 30 mA as current revealed the highest reflectance of 96.4%, while being illuminated with a light of 700nm wave-length. But their adhesion showed unsatisfactory results. Though the films showed a condensation type in the cross-sectional views, they revealed crystallinity in the planes of (111) and (200) and growth orientation in <100> direction.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.12
• /
• pp.1222-1226
• /
• 2000

We synthesized the simple triethoxysilanes (SGDR1) bearing a disperse red 1 for thin film fabrication. The thin films were prepared using the solution of SGDR1 after hydrolysis and condensation. The films were annealed at two different temperatures such as $150^{\circ}C$ and $200^{\circ}C$. Trans-to-cis photoisomerization was observed under the exposure of 532 nm light with UV-Vis absorption spectroscopy. The kinetic study of photoisomerization was performed in the film. Reorientation of the polar azobenzene molecules induced optical anisotropy under a linearly polarized light at 532 nm. The effect of aggregation of the chromophores and annealing of the silicon oxide in the matrix were studied on the dynamic properties of isomerization and induced birefringence.

• Journal of Biosystems Engineering
• /
• v.19 no.3
• /
• pp.232-246
• /
• 1994

This study was conducted to develop the long-tenn storage method to minimize the black spot occurred on the surface of persimmons stored in the films at low temperature. The storage experiments were done with different films and persimmon varieties at $0^{\circ}C$ storage condition for 5 months, and then the physical and chemical characteristics of persimmons were tested monthly. The results were as follows : 1. The film 160 made from zeolites showed highest performance in well storings sweet persimmons for 5 months, compared with other films by eyesight. The initial moisture condensation inside the films seemed to cause the black spots on persimmons, and the effect of the film holes was never significant to prevent the black spots. 2. The sugar content was ranged from $14^{\circ}Brix$ to $15^{\circ}Brix$ regardless of film types and persimmom varieties, and it changed little for storage of 5 months. 3. The decrease rate of persimmom weight in the film 160 and 180 was 0.3% for storage of 5 months, while those in other films reached to 2%. The decrease rate of persimmon weight was least in the film 160 and 180. 4. The hardness of Fuyu least decreased in the films 160 and 380. It was changed from 36 kg/cnf to 8-27 $kg/cm^2$, and that of Charyang was from 31 $kg/cm^2$ to 8-10 $kg/cm^2$ for storage of 5 months. The hardness of Charyang rapidly decreased as storage period increased. 5. The average rate of black spot(defect rate) of Fuyu measured by a computer image processing system was least in the film 160 by 0.5%, but those in other films was ranged from about 5% to 20% for storage of 5 months. The rate of black spot of Charyang was less than that of Fuyu among most of films. 6. The intensity, hue, and saturation in persimmon color changed according to storage period. Especially, the intensity of persimmon colors decreased as storage period increased, but it was least in the film 160. 7. An integrated long-term storage method of sweet persimmons was suggested in the basis of the experiments and literature reviews.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.11
• /
• pp.1169-1176
• /
• 2011

Liquid film flows are classified into waveless laminar, wavy laminar, and turbulent flows depending on the Reynolds number or the flow stability. Since the wavy motions of the film flows are so intricate and nonlinear, studies on them have largely been experimental. Most numerical approaches have been limited to the waveless flow regime. The various free surface-tracking schemes adopted for this problem were used to more accurately estimate the average film thickness, rather than to capture the unsteady wavy motion. In this study, the wavy motions in laminar wavy liquid film flows with Reynolds numbers of 200-1000 were simulated with various numerical schemes based on the volume of fluid (VOF) method for interface tracking. The results from each numerical scheme were compared with the experimental results in terms of the average film thickness, the wave velocity, and the wave amplitude.