• 한국재료학회지
• /
• 제20권2호
• /
• pp.97-103
• /
• 2010

In this study, a new, relatively simple fabrication method for forming a mesoporous $Al(OH)_3$ film on Al substrates was demonstrated. This method, i.e., alkali surface modification, was simply comprised of dipping the substrate in a $5\times10^{-3}$ M NaOH solution at $80^{\circ}C$ for one minute and then immersing it in boiling water for 30 minutes. After alkali surface modification, a mesoporous $Al(OH)_3$ film was formed on the Al substrate, and its chemical state and crystal structure were confirmed by XPS and TEM. According to the results of the XPS analysis, the flake-like morphology after the alkali surface modification was mainly composed of $Al(OH)_3$, with a small amount of $Al_2O_3$. The mesoporous $Al(OH)_3$ layer was composed of three regions: an amorphousrich region, a region of mixed amorphous and crystal domains, and a crystalline-rich region near the $Al(OH)_3$ layer surface. It was confirmed that the stabilization process in the alkali surface modification strongly influenced the crystallization of the mesoporous $Al(OH)_3$ layer.

• 한국수산과학회지
• /
• 제48권4호
• /
• pp.411-416
• /
• 2015

Olive flounder Paralichthys olivaceus production has increased gradually in recent years, but prices have fallen. Thus, the development of a variety of processed foods incorporating olive flounder would help to increase the income of fishermen. This study was conducted to investigate the best method for olive flounder ball processing. Clean olive flounder were divided into five portions. Olive flounder meat (100 g with added egg white 39 g) was chopped and then mixed with 10 mL fresh cream and ingredients. The dough was molded into the shape of a ball. The olive flounder balls were then processed by two different methods. In the first method, the flounder ball was boiled in water for 3 min then vacuum-packed in polyethylene film and stored at $-20^{\circ}C$ for 7 days. After 7 days, the ball was thawed and heated in a microwave for 2 min (Sample-1). In the second method, the ball was vacuum-packed in polyethylene film without boiling and then stored at $-20^{\circ}C$ for 7 days before thawing and boiling in water for 3 min (Sample-2). After heating, both types of olive flounder balls were evaluated. Various factors (including the viable bacterial count, chemical composition, pH, hardness, thiobarbituric acid level, salinity, and free amino acid content) were measured, and a sensory evaluation was conducted. Based on the results of the sensory and hardness evaluations, Sample-1 was deemed to be superior to Sample-2.

• Journal of the Korean Wood Science and Technology
• /
• 제45권5호
• /
• pp.559-571
• /
• 2017

본 연구에서는 열가소성수지 필름의 사용량과 적층방향에 따른 합판의 접착성능을 알아보고자 하였다. 사용된 표판과 이판은 열대산 활엽수 잡목(Mixed light hardwood) 단판과 심판은 라디에타파인(Pinus radiata D. Don) 단판을 사용하였다. 필름은 폴리프로필렌(Polypropylene, PP) 필름과 폴리에틸렌(Polyethylene, PE) 필름을 사용하였다. 먼저 PP와 PE 필름의 특성을 알아보기 위하여 열분석과 인장강도를 조사하였다. 그 결과, PP 필름과 PE 필름의 용융온도는 $163.4^{\circ}C$, $109.7^{\circ}C$였으며, 결정화온도는 $98.9^{\circ}C$, $93.6^{\circ}C$로 나타났다. 각 필름별 인장강도와 신장률은 길이방향보다 폭방향이 더 큰 것으로 나타났다. 필름의 특성을 고려하여, 필름 사용량에 대한 시험은 단판 상에 목표두께별로 필름을 적층하는 방법으로 실시하였다. 그리고 필름의 적층방향에 따른 시험은 단판의 목리방향을 기준으로 필름의 길이방향과 폭방향을 구분하여 각각 적층한 후 합판을 제조하였다. 각각 제조된 합판으로 접착성능을 시험한 결과, 준내수 인장 전단 접착력은 PP 필름의 두께가 0.05 mm 이상, PE 필름은 0.10 mm 이상일 때 KS기준을 만족하였다. 내수 인장 전단 접착력은 PP 필름 두께가 0.20 mm일 때 KS기준을 상회하였다. 필름의 적층방향별 접착성능 시험에서, 단판의 목리방향과 필름의 폭방향으로 적층했던 합판은 필름의 길이방향으로 적층했던 합판보다 더 우수한 결과를 보였다. 현미경으로 관찰된 합판의 표면과 접착층에서 열가소성수지가 단판 내부와 할렬부위로 침투하여 기계적 결합을 이룬 것으로 확인되었다.

• 한국식품과학회지
• /
• 제7권2호
• /
• pp.61-68
• /
• 1975

산막효모(産膜酵母)가 형성(形成)된 제품(製品)간장에서 산막생성(産膜生成)과 발효력(醱酵力)이 강(强)한 효모(酵母)를 분리(分離)하고 Lodder 들의 효모분류법(酵母分類法)에 따라 Saccharomyces rouxii (film forming yeast)로 동정(同定)하였으며 이효모(酵母)들의 발효현상(發酵現象) 및 생리적(生理的) 특성(特性)은 다음과 같았다. 1. 간장발효실험(發酵實驗)에서 간장중(中)에 함유(含有)된 당분(糖分)을 모두 발효(醱酵)시켜 고형분(固形分)은 감소(減少)되고 총질소(總窒素), 색도(色度)를 감소(減少)시켰다. 2. 방부력실험(防腐力實驗)에서 butylparaben 은 60 ppm, sodium benzoate 800 ppm, sodium propionate 2,400 ppm, menadione 165 ppm, potassium sorbate 500 ppm, sorbic acid 300 ppm 이상(以上)의 농도(濃度)에서 이들균(菌)의 생육(生育)이 억제(抑制)되었고 에칠알콜 첨가구(添加區)에서는 3%에서도 방부력(防腐力)이 없었다. 3. 2%(w/v) glucose yeast extract peptone 배지(培地)에서 이들균(菌)의 최적식고농도(最適食?濃度)는 5%, 최적배양온도(最適培養溫度)는 $30^{\circ}C$, 사멸온도(死滅溫度)는 NO-1, 3균(菌)이 $62^{\circ}C$ (10분간(分間) 살균처리(殺菌處理)), NO-2, 4균(菌)이 $65^{\circ}C$ 이었으며 최적(最適) pH 는 5. 0이었다. 4. Gas chromatography 에 의(依)한 피막(皮膜)간장의 향기성분(香氣成分)은 표준(標準)간장에 비(比)해 저비점(低沸點)의 물질(物質)이 많으며 이 성분(成分)들이 간장의 풍미열화(風味劣化)에 기여(寄與)하는 것으로 생각되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.99-99
• /
• 2009

Two different micro-flows during the evaporation of ink droplets were achieved by engineering both surface tension gradient and compositional gradient across the ink droplet: (1) Coffee-ring generating flow resulting from the outward flow inside the ink droplet & (2) Marangoni flow leading to the circulation flow inside the ink droplet. The surface tension gradient and the compositional gradient in the ink droplets were tailored by mixing two different solvents with difference surface tension and boiling point. In order to create the coffee-ring generating flow (outward flow), a single-solvent system using N,N-dimethylformamide with nano-sized spherical alumina particles was formulated, Marangoni flow (circulation flow) was created in the ink droplets by combining N,N-dimethylformamide and fotmamide with the spherical alumina powders as a co-solvent ink system. We have investigated the effect of these two different flows on the formation of ceramic films by inkjet printing method, The packing density of the ceramic films printed with two different ink systems (single- and co-solvent systems) and their surface roughness were characterized. The dielectric properties of these inkjet-printed ceramic films such as dielectric constant and dissipation factor were also studied in order to evaluate the feasibility of their application to the electronic ceramic package substrate.

• 전기전자학회논문지
• /
• 제26권2호
• /
• pp.205-210
• /
• 2022

본 연구에서는 유기 발광 다이오드(OLED)의 광추출 향상을 위한 롤투롤 마이크로컨택(mCP)방식으로 인쇄된 마이크로렌즈 어레이(MLA)를 제시하였다. 상업적으로 사용되는 마이크로렌즈 어레이를 템플레이트로 사용하여서 polydimethylpolysiloxane(PDMS)를 롤스탬프로 제작하였다. 낮은 끓는 점을 가지는 불소화 잉크로부터 PDMS 롤스탬프에 고분자 박막을 형성하고 이를 OLED의 하부면에 고압·고온 처리 없이 인쇄하였다. 최적화된 농도를 찾아서 템플레이트로 사용된 MLA와 거의 동일한 모양의 패턴을 성공적으로 인쇄하였다. 마이크로컨택 방식으로 인쇄된 MLA의 구조와 소재의 낮은 흡수도로 인해서 OLED의 외부양자효율이 18% 향상되었다.

• 한국결정성장학회지
• /
• 제14권5호
• /
• pp.187-192
• /
• 2004

We try to use isopropanol which has low boiling point to prepare ZnO thin films at low temperature. ZnO thin films were prepared by sol-gel spin-coating method using zinc acetate dehydrate-isopropanol-monoethanolamine (MEA) solution. The c-axis preferred orientation and optical properties of ZnO films with preheating temperature have been investigated. ZnO thin films were preheated at 200 to $300^{\circ}C$ with an interval of $25^{\circ}C$ and post-heated at $650^{\circ}C$. The ZnO film preheated at $275^{\circ}C$ and post-heated at $650^{\circ}C$ was highly oriented along c-axis (002) plane, and the surface with homogeneous and dense microstructures was formed having nano-sized grains. The optical transmittance was above 90 % in the visible range and exhibited absorption edges at 368 nm wavelength.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.2113_2114
• /
• 2009

Chalcopyrite based sollar cells have received much attention because of their tunable electronic and optical properties. As a typical ternary chalcopyrite material, $CuInS_2$ has been considered as one of the most popular and promising candidates as absorber materials for photovoltaic applications because of its high absorption coefficient and environmental consideration. In this study, $CuInS_2$ powders have been synthesized using polyol process of a mixture of copper nitrate, indium nitrate, and thiourea with various stoichiometric molar ratios in ethylene glycol at $196^{\circ}C$. As boiling time goes by, the color of metal ion mixed solutions were changed transparent green to dark green and finally turned to black by reduction of OH- radicals. The prepared powders were fully characterized using SEM, XRD. The particle shape of black colored powders showed sphere with about 50 nm in particle size compared to those with dark green colored powders showed irregular shape with about $1{\mu}m$ in particle size. The XRD results showed highly crystallized $CuInS_2$.

• 한국진공학회지
• /
• 제8권4A호
• /
• pp.425-431
• /
• 1999

$Pb(Zr_{0.52}, Ti_{0.48})O_3$ (PZT) thick films as an actuating material with conducting oxides, $(La_{0.5}Sr_{0.5}) CoO_3$ (LSCO), have been fabricated by sol-gel method for Optical Micro-Electro-Mechanical System (MEMS) devices, in which PZT/LSCO/SiO2 structures were used. In order to improve the adhesion to LSCO solution in order to enhance the wetting behavior of a water-based LSCO precursor solution and further to improve the adhesion between LSCO and $SiO_2$ layers. PZT films were made using 1-3 propanediol based precursor solution which has a high viscosity and a boiling point appropriate for thick film fabrication. In the precursor solution, Ti-propoxied and Zr-propoxied are partially substituted with acetylacetone to achieve the solution stability while maintaining reactivity. Crack free PZT films (0.8~1$\mu\textrm{m}$) have been successfully fabricated at crystallization temperatures above $700^{\circ}C$. Dielectric constants and dielectric losses of the PZT films were 900~1200and 2~5%, respectively. Piezoelectric constant $d_{33}$ of the PZT films constrained by a substrate were 200pm/V at 100kV/cm.

• 대한기계학회논문집
• /
• 제18권5호
• /
• pp.1275-1287
• /
• 1994

Heat transfer performance improvement by fin and grooves is studied for condensation of R-11 on integral-fin tubes. Eight tubes with trapezoidal shaped integral-fins having fin densities from 748 to 1654 fpm and 10, 30 grooves are tested. A plain tube having the same diameter as the finned tubes is also tested for comparison. R-11 condenses at saturation state of $32^{\circ}C$ on the outside tube surface cooled by inside water flow. All of test data ate taken at steady state. Beatty and Katz's, Rudy's and Webb's theoretical models are used to predict the R-11 condensation coefficient of tubes having 748, 1024 and 1299 fpm. The predicted value by Betty and Katz's model is within 10% of experimental values in this study at fpm<1024 and Rudy's model predicted the experimental data at fpm>1024 within 15%. The tube having fin density of 1299 fpm and 30 grooves has the best overall heat transfer performance. This tube shows the overall heat transfer coefficient of 11500 $W/m^{2}K$,/TEX> at coolant velocity of 3.0m/s.