• Journal of Korean Academy of Nursing
• /
• v.27 no.3
• /
• pp.683-693
• /
• 1997

Urinary incontinence is defined as the involuntary and inappropriate loss of urine to failure to emit normal responses as the bladder fills, or inability to reach the bathroom in sufficient time. This study was undertaken to estimate the incidence of urinary incontinence and to determine the correlates of urinary incontinence among women. Subjects of this survey consisted of 408 women, 26 to 83 years old in Incheon. The results of this study are as follows. 1. Of the subjects 50.7% reported urine loss once or twice per year and 28.5% reported incontinence on a regular basis at least once per month. 2. 40.5% of women reported small volume accidents of only 1 to 2 drops, 31.4% ; 1 t-spoon, 16.9% : 1 T-spoon, while 10.1% of women couldn't estimate the volume of urine loss. 3. The volume of urine loss was great enough to require a change of garment (undergarments or outer garments) in 73%. But only 3.8% of those used some type of pads. 4. 56.5% of incontinent women didn't talk about their urinary incontinence with other persons because they felt that urinary incontinence was shameful(38.4%), was not a disease(31.6%), was incurable in spite of treatment(27.4%) and was fearful of being uncured (2.6%). 5. Only 15.5% of urinary incontinent women had sought treatment. 6. The incidence of urinary incontinence was significantly higher in women who had more pariety and uterine-ovarian disease, older age, worrying about where toilets were when they visited new places or voiding anxiety, nocturia and frequency, but was significantly lower in women who had coffee intake. The incidence of urinary incontinence was not related to smoking and enuresis. The results indicate that urinary incontinence is common among young and middle-aged women. That few seek treatment for urinary incontinence suggests a need for more information about women's attitudes toward urinary incontinence and more attention to this problem by health care providers.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.107-112
• /
• 2005

Road is built continuously along with development of industry and cut slope is happened necessarily in road construction. Geoengineers are executing cut slope stability analysis considering various cut slope condition such as topography, geology, hydraulic condition and so on. The Tertiary Jungja Basin is located in the southeastern coastal area of the Korea Peninsula. Jungja Basin area is created by geotectonic movement of the plate after Early Miocene epoch. The northwestern and southwestern boundary of the basin is fault zone. The Basement rock is hornfels (Ulsan Formation). Basin-fills consist of extrusive volcanic rock(Tangsa Andesites), unconsolidated fluviatile conglomerate(Kangdong Formation) and shallow brackish-water sandstone(Sinhyun Formation). The characteristics of cut slopes in this area is different with cut slopes in the other site. Soil layers in this area is unconsolidated sediments and is not formed the weathering and erosion of the rock. So, the depth of soil layer is very thick. Faults of this area are northwest-southeast and northeast-southwest direction. Expandible clay mineral as smectite, chlorite et al. detected from fault gouge using XRD. Therefore, Jungja Basin area must consider the characteristics of the faults and soil layers thickness necessarily cut slopes stability analysis.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.4
• /
• pp.366-375
• /
• 2001

The objective of this study was to investigate the surface contact and screw joint stability between screw and implant interface by use of sealer. The implants evaluated in this study were Steri-Oss futures(Hexlock $3.8D{\times}10mm$: Steri-Oss, Yorba Linda, CA), and Steri-Oss staight abutment. Titanium alloy screws were used to secure abutments to implants. The other titanium alloy screws applicating sealer(Impla-Seal, Implant Support Systems, Inc. Irvine, CA) were used to secure abutments to implants. In one another sample, 6kg of force was applied during simulated intraoral movements after abutment screws were secured to the implants with sealer. All samples were cross sectioned with sandpaper and polished with $0.1{\mu}m\;Al_2O_3$. Then samples were recorded with an scanning electron microscope. The results were as follows : 1. In the case of titanium alloy screw, irregular contacts and relatively large gap were present at thread mating surface. Also abutment screw/implant interface demonstrate incomplete seating and only one surface contact of threads between implant and screw. 2. In the case of titanium alloy screw applecating sealer, sealer was present between implant and screw. Therefore implant and screw had relatively close and tight contact without the presence of large gap. 3. On the other hand, in the case of titanium alloy screw applicating sealer and dynamic loading of suprastructures, sealer was partially present between implant and screw. Conclusively, sealer fills voids, creating a barrier to moisture and bacteria. In addition, loading of suprastructures may change the situation and limit the indications for gap sealing.

• The Korean Journal of Petroleum Geology
• /
• v.7 no.1_2 s.8
• /
• pp.7-12
• /
• 1999

A new high-resolution rnagnetotelluric (MT) survey was conducted for pull-apart basin analysis (Cretaceous Eumsung Basin), combined with surface sedimentological results. Two cross-basinal MT profiles represent an asymmetric form with a subbasin in the southeastern part. These basinal architectures are well compatible with paleoflow directions and facies transitions of surface sedimentology. The results also suggest that the basin fills reflect pull-apart opening with rapid subsidence of the central blocks. Combined with the surface sedimentological data on asymmetric lithofacies distribution, facies transitions, and paleoflow directions of the alluvio-lacustrine systems, the MT data help explain basin-fill processes during the basin formation. For petroleum exploration and basin analysis, the high-frequency MT technique can be a useful substitute for the costly burden of a seismic-reflection survey on land.

• Journal of Yeungnam Medical Science
• /
• v.25 no.2
• /
• pp.117-123
• /
• 2008

Dermatomyositis is characterized by progressive, symmetric, proximal muscle weakness and a nonsuppurative inflammatory myopathy of unknown etiology involving predominantly skeletal muscles. It is also characterized by typical skin lesions. Interstitial lung disease has a poor prognosis when it is associated with dermatomyositis. Organizing pneumonia is a disease in which granulation tissue fills the lumina of terminal and respiratory bronchioles and extends into the distal airspaces. The cryptogenic nature of the process is appreciated in that organizing pneumonia patterns of injury can be seen in secondary forms of the disease (secondary organizing pneumonia). Organizing pneumonia has been reported to occur in 5~10% in dermatomyositis-polymyositis patients. Anti-histidyl tRNA synthetase antibody (anti-Jo-1) is a predictive disease marker that is reported to occur in up to 70% of patients. We describe a 49-year-old male dermatomyositis patient who presented with organizing pneumonia and was found to have negative anti-Jo-1 antibody.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1287-1296
• /
• 2007

Recently, the high speed railway comes into the spotlight as the important and convenient traffic infrastructure. In Korea, Kyung-Bu high speed train service began in about 400km section at 2004, and the Ho-Nam high speed railway will be constructed by 2017. The high speed train will run with a design maximum speed of 300-350km/hr. Since the trains are operated at high speed, the differential settlement of subgrade under the rail is able to cause a fatal disaster. Therefore, the differential settlement of the embankment must be controlled with the greatest care. Furthermore, the characteristics and causes of settlements which occurred under construction and post-construction should be investigated. A considerable number of studies have been conducted on the settlement of the natural ground over the past several decades. But little attention has been given to the compression settlement of the embankment. The long-term settlement of compacted fills embankments is greatly influenced by the post-construction wetting. This is called 'hydro collapse' or 'wetting collapse'. In spite of little study for this wetting collapse problem, it has been recognized that the compressibility of compacted sands, gravels and rockfills exhibit low compressibility at low pressures, but there can be significant compression at high pressures due to grain crushing by several researchers(Marachi et al. 1969, Nobari and Duncan 1972, Noorany et al. 1994, Houston et al. 1993, Wu 2004). The characteristics of compression of fill materials depend on a number of factors such as soil/rock type, as-compacted moisture, density, stress level and wetting condition. Because of the complexity of these factors, it is not easy to predict quantitatively the amount of compression without extensive tests. Therefore, in this research I carried out the wetting collapse tests, with focusing in various soil/rock type, stress levels, wetting condition more closely.

• Journal of the Korean Vacuum Society
• /
• v.6 no.3
• /
• pp.206-212
• /
• 1997

The reflow characteristics of copper, which is expected to be used as interconnection materials in the next generation semiconductor devices, were investigated. Copper films were deposited on hole and trench patterns by metal organic chemical vapor deposition and annealed in nitrogen and oxygen ambient with the annealing temperatures ranging from $350^{\circ}C$ to $550^{\circ}C$. Copper films were not reflowed into the patterns upon the annealing in nitrogen ambient, but reflowed at the annealing temperature higher than $450^{\circ}C$ in oxygen ambient. It is considered that the reflow takes place as the heat generated by the oxidation of copper liquefies the copper film partly and the liquid copper fills the patterns for minimizing the surface energy and the potential energy. Upon the annealing in oxygen ambient, the copper oxide whose thickness was less than 300$\AA$ formed at the surface of an agglomerate and the resistivity of copper film increased drastically at an annealing temperature of $550^{\circ}C$ due to the copper agglomeration.

• The Journal of Art Theory & Practice
• /
• no.13
• /
• pp.185-213
• /
• 2012

Charles Stankievech's 2011 installation LOVELAND includes a wall-sized screen depicting video footage of a barren arctic landscape in an enclosed room, painted and bathed in white light, that appears as an extension of the imaged environment. A melodic and industrial musical score emanates from multiple sound panels and as the music increases a cloud of purple smoke becomes visible on the horizon line in the distance and gradually advances toward the viewer until it completely fills the screen. The smoke then remains, rushing about madly and lapping at the border between the screen and the room before it suddenly subsides and the spectator is again left with the desolate landscape. The entire process takes a mere five minutes and then, fixed on an endless loop, begins again. This paper positions LOVELAND as an attempt to simulate a sublime experience of the end of the world through a transposition of the Arctic atmosphere into the gallery space. Encompassing a discussion of the historical and contemporary significance of the Arctic in popular culture, aesthetics and environmental politics, it is suggested that Stankievech employs an apocalyptic trope in reference to the unstable position of the North in the current political and ecological climate. Revisiting critiques of modernist exhibition practices and investigating the perceptual and temporal dimensions of the work, this analysis focuses primarily on the experience of the installation's spectator. Visually, aurally and phenomenologically immersed, the viewer is made subject to, and implicated in, the events unfolding on the screen and within the space. Due to the looping of the video footage, this paper argues that the apocalypse imaged in LOVELAND is presented as an endless event - incessantly enacted, yet infinitely deferred - and that the spectator is enveloped in an uncertain and unceasingly extended present moment.

• Journal of Korea Multimedia Society
• /
• v.9 no.9
• /
• pp.1139-1149
• /
• 2006

This paper describes a novel and efficient algorithm, which extracts focused objects from still images with low depth-of-field (DOF). The algorithm unfolds into four modules. In the first module, a HOS map, in which the spatial distribution of the high-frequency components is represented, is obtained from an input low DOF image [1]. The second module finds OOI candidate by using characteristics of the HOS. Since it is possible to contain some holes in the region, the third module detects and fills them. In order to obtain an OOI, the last module gets rid of background pixels in the OOI candidate. The experimental results show that the proposed method is highly useful in various applications, such as image indexing for content-based retrieval from huge amounts of image database, image analysis for digital cameras, and video analysis for virtual reality, immersive video system, photo-realistic video scene generation and video indexing system.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.8
• /
• pp.691-700
• /
• 2000

The standard volume ray-tracing, optimized with octree, needs to repeatedly traverse hierarchical structures for each ray that often leads to redundant computations. It also employs the expensive 3D interpolation for producing high quality images. In this paper, we present a new ray-casting method that efficiently computes shaded colors and opacities at resampling points by traversing octree only once. This method traverses volume data in object-order, finds resampling points on slices incrementally, and performs resampling based on 2D interpolation. While the early ray-termination, which is one of the most effective optimization techniques, is not easily combined with object-order methods, we solved this problem using a dynamic data structure in image space. Considering that our new method is easy to implement, and need little additional memory, it will be used as very effective volume method that fills the performance gap between ray-casting and shear-warping.